On Thu, Jul 30, 2020 at 09:08:48PM +0000, Krzysztof Wilczyński wrote:
> Rename PCI-related variable "d3_delay" to "d3hot_delay" in the pci_dev
> struct to better align with the PCI Firmware specification (see PCI
> Firmware Specification, Revision 3.2, Section 4.6.9, p. 73).
>
> The pci_dev struct already contains variable "d3cold_delay", thus
> renaming "d3_delay" to "d3hot_delay" reduces ambiguity as PCI devices
> support two variants of the D3 power state: D3hot and D3cold.
>
> Also, rename other constants and variables, and updates code comments
> and documentation to ensure alignment with the PCI specification.
>
> There is no change to the functionality.
>
> Signed-off-by: Krzysztof Wilczyński <k...@linux.com>
Applied to pci/pm for v5.10, thanks!
> ---
> Documentation/power/pci.rst | 2 +-
> arch/x86/pci/fixup.c | 2 +-
> arch/x86/pci/intel_mid_pci.c | 2 +-
> drivers/hid/intel-ish-hid/ipc/ipc.c | 2 +-
> drivers/net/ethernet/marvell/sky2.c | 2 +-
> drivers/pci/pci-acpi.c | 6 +-
> drivers/pci/pci.c | 14 ++--
> drivers/pci/pci.h | 4 +-
> drivers/pci/quirks.c | 68 +++++++++----------
> .../staging/media/atomisp/pci/atomisp_v4l2.c | 2 +-
> include/linux/pci.h | 2 +-
> include/uapi/linux/pci_regs.h | 2 +-
> 12 files changed, 54 insertions(+), 54 deletions(-)
>
> diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
> index 1831e431f725..b04fb18cc4e2 100644
> --- a/Documentation/power/pci.rst
> +++ b/Documentation/power/pci.rst
> @@ -320,7 +320,7 @@ that these callbacks operate on::
> unsigned int d2_support:1; /* Low power state D2 is supported */
> unsigned int no_d1d2:1; /* D1 and D2 are forbidden */
> unsigned int wakeup_prepared:1; /* Device prepared for wake up */
> - unsigned int d3_delay; /* D3->D0 transition time in ms */
> + unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */
> ...
> };
>
> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
> index 0c67a5a94de3..9e3d9cc6afc4 100644
> --- a/arch/x86/pci/fixup.c
> +++ b/arch/x86/pci/fixup.c
> @@ -587,7 +587,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26d,
> pci_invalid_bar);
> static void pci_fixup_amd_ehci_pme(struct pci_dev *dev)
> {
> dev_info(&dev->dev, "PME# does not work under D3, disabling it\n");
> - dev->pme_support &= ~((PCI_PM_CAP_PME_D3 | PCI_PM_CAP_PME_D3cold)
> + dev->pme_support &= ~((PCI_PM_CAP_PME_D3hot | PCI_PM_CAP_PME_D3cold)
> >> PCI_PM_CAP_PME_SHIFT);
> }
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7808, pci_fixup_amd_ehci_pme);
> diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
> index 00c62115f39c..979f310b67d4 100644
> --- a/arch/x86/pci/intel_mid_pci.c
> +++ b/arch/x86/pci/intel_mid_pci.c
> @@ -322,7 +322,7 @@ static void pci_d3delay_fixup(struct pci_dev *dev)
> */
> if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
> return;
> - dev->d3_delay = 0;
> + dev->d3hot_delay = 0;
> }
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup);
>
> diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c
> b/drivers/hid/intel-ish-hid/ipc/ipc.c
> index 8f8dfdf64833..a45ac7fa417b 100644
> --- a/drivers/hid/intel-ish-hid/ipc/ipc.c
> +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
> @@ -755,7 +755,7 @@ static int _ish_hw_reset(struct ishtp_device *dev)
> csr |= PCI_D3hot;
> pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
>
> - mdelay(pdev->d3_delay);
> + mdelay(pdev->d3hot_delay);
>
> csr &= ~PCI_PM_CTRL_STATE_MASK;
> csr |= PCI_D0;
> diff --git a/drivers/net/ethernet/marvell/sky2.c
> b/drivers/net/ethernet/marvell/sky2.c
> index fe54764caea9..ce7a94060a96 100644
> --- a/drivers/net/ethernet/marvell/sky2.c
> +++ b/drivers/net/ethernet/marvell/sky2.c
> @@ -5104,7 +5104,7 @@ static int sky2_probe(struct pci_dev *pdev, const
> struct pci_device_id *ent)
> INIT_WORK(&hw->restart_work, sky2_restart);
>
> pci_set_drvdata(pdev, hw);
> - pdev->d3_delay = 300;
> + pdev->d3hot_delay = 300;
>
> return 0;
>
> diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
> index 7224b1e5f2a8..c54588ad2d9c 100644
> --- a/drivers/pci/pci-acpi.c
> +++ b/drivers/pci/pci-acpi.c
> @@ -1167,7 +1167,7 @@ static struct acpi_device
> *acpi_pci_find_companion(struct device *dev)
> * @pdev: the PCI device whose delay is to be updated
> * @handle: ACPI handle of this device
> *
> - * Update the d3_delay and d3cold_delay of a PCI device from the ACPI _DSM
> + * Update the d3hot_delay and d3cold_delay of a PCI device from the ACPI _DSM
> * control method of either the device itself or the PCI host bridge.
> *
> * Function 8, "Reset Delay," applies to the entire hierarchy below a PCI
> @@ -1206,8 +1206,8 @@ static void pci_acpi_optimize_delay(struct pci_dev
> *pdev,
> }
> if (elements[3].type == ACPI_TYPE_INTEGER) {
> value = (int)elements[3].integer.value / 1000;
> - if (value < PCI_PM_D3_WAIT)
> - pdev->d3_delay = value;
> + if (value < PCI_PM_D3HOT_WAIT)
> + pdev->d3hot_delay = value;
> }
> }
> ACPI_FREE(obj);
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index c9338f914a0e..5e5d15a96fe1 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -49,7 +49,7 @@ EXPORT_SYMBOL(isa_dma_bridge_buggy);
> int pci_pci_problems;
> EXPORT_SYMBOL(pci_pci_problems);
>
> -unsigned int pci_pm_d3_delay;
> +unsigned int pci_pm_d3hot_delay;
>
> static void pci_pme_list_scan(struct work_struct *work);
>
> @@ -66,10 +66,10 @@ struct pci_pme_device {
>
> static void pci_dev_d3_sleep(struct pci_dev *dev)
> {
> - unsigned int delay = dev->d3_delay;
> + unsigned int delay = dev->d3hot_delay;
>
> - if (delay < pci_pm_d3_delay)
> - delay = pci_pm_d3_delay;
> + if (delay < pci_pm_d3hot_delay)
> + delay = pci_pm_d3hot_delay;
>
> if (delay)
> msleep(delay);
> @@ -2878,7 +2878,7 @@ void pci_pm_init(struct pci_dev *dev)
> }
>
> dev->pm_cap = pm;
> - dev->d3_delay = PCI_PM_D3_WAIT;
> + dev->d3hot_delay = PCI_PM_D3HOT_WAIT;
> dev->d3cold_delay = PCI_PM_D3COLD_WAIT;
> dev->bridge_d3 = pci_bridge_d3_possible(dev);
> dev->d3cold_allowed = true;
> @@ -2903,7 +2903,7 @@ void pci_pm_init(struct pci_dev *dev)
> (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "",
> (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "",
> (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "",
> - (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "",
> + (pmc & PCI_PM_CAP_PME_D3hot) ? " D3hot" : "",
> (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : "");
> dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT;
> dev->pme_poll = true;
> @@ -4601,7 +4601,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
> *
> * NOTE: This causes the caller to sleep for twice the device power
> transition
> * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10
> ms
> - * by default (i.e. unless the @dev's d3_delay field has a different value).
> + * by default (i.e. unless the @dev's d3hot_delay field has a different
> value).
> * Moreover, only devices in D0 can be reset by this function.
> */
> static int pci_pm_reset(struct pci_dev *dev, int probe)
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 6d3f75867106..70e699e2e264 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -44,7 +44,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
> int pci_bus_error_reset(struct pci_dev *dev);
>
> #define PCI_PM_D2_DELAY 200
> -#define PCI_PM_D3_WAIT 10
> +#define PCI_PM_D3HOT_WAIT 10
> #define PCI_PM_D3COLD_WAIT 100
> #define PCI_PM_BUS_WAIT 50
>
> @@ -177,7 +177,7 @@ extern struct mutex pci_slot_mutex;
>
> extern raw_spinlock_t pci_lock;
>
> -extern unsigned int pci_pm_d3_delay;
> +extern unsigned int pci_pm_d3hot_delay;
>
> #ifdef CONFIG_PCI_MSI
> void pci_no_msi(void);
> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> index 812bfc32ecb8..b09215b75b10 100644
> --- a/drivers/pci/quirks.c
> +++ b/drivers/pci/quirks.c
> @@ -1846,7 +1846,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,
> PCI_DEVICE_ID_INTEL_PXHV, quirk_pci
> */
> static void quirk_intel_pcie_pm(struct pci_dev *dev)
> {
> - pci_pm_d3_delay = 120;
> + pci_pm_d3hot_delay = 120;
> dev->no_d1d2 = 1;
> }
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
> @@ -1873,12 +1873,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b,
> quirk_intel_pcie_pm);
>
> static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay)
> {
> - if (dev->d3_delay >= delay)
> + if (dev->d3hot_delay >= delay)
> return;
>
> - dev->d3_delay = delay;
> + dev->d3hot_delay = delay;
> pci_info(dev, "extending delay after power-on from D3hot to %d msec\n",
> - dev->d3_delay);
> + dev->d3hot_delay);
> }
>
> static void quirk_radeon_pm(struct pci_dev *dev)
> @@ -3374,36 +3374,36 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152,
> disable_igfx_irq);
> * PCI devices which are on Intel chips can skip the 10ms delay
> * before entering D3 mode.
> */
> -static void quirk_remove_d3_delay(struct pci_dev *dev)
> -{
> - dev->d3_delay = 0;
> -}
> -/* C600 Series devices do not need 10ms d3_delay */
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay);
> -/* Lynxpoint-H PCH devices do not need 10ms d3_delay */
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay);
> -/* Intel Cherrytrail devices do not need 10ms d3_delay */
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay);
> -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay);
> +static void quirk_remove_d3hot_delay(struct pci_dev *dev)
> +{
> + dev->d3hot_delay = 0;
> +}
> +/* C600 Series devices do not need 10ms d3hot_delay */
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c,
> quirk_remove_d3hot_delay);
> +/* Lynxpoint-H PCH devices do not need 10ms d3hot_delay */
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e,
> quirk_remove_d3hot_delay);
> +/* Intel Cherrytrail devices do not need 10ms d3hot_delay */
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8,
> quirk_remove_d3hot_delay);
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc,
> quirk_remove_d3hot_delay);
>
> /*
> * Some devices may pass our check in pci_intx_mask_supported() if
> diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> index a000a1e316f7..beba430a197e 100644
> --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c
> @@ -1573,7 +1573,7 @@ static int atomisp_pci_probe(struct pci_dev *pdev,
> const struct pci_device_id *i
> spin_lock_init(&isp->lock);
>
> /* This is not a true PCI device on SoC, so the delay is not needed. */
> - pdev->d3_delay = 0;
> + pdev->d3hot_delay = 0;
>
> pci_set_drvdata(pdev, isp);
>
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 34c1c4f45288..cd9abbbc55e3 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -373,7 +373,7 @@ struct pci_dev {
> user sysfs */
> unsigned int clear_retrain_link:1; /* Need to clear Retrain Link
> bit manually */
> - unsigned int d3_delay; /* D3->D0 transition time in ms */
> + unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */
> unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */
>
> #ifdef CONFIG_PCIEASPM
> diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
> index f9701410d3b5..49f15c37e771 100644
> --- a/include/uapi/linux/pci_regs.h
> +++ b/include/uapi/linux/pci_regs.h
> @@ -246,7 +246,7 @@
> #define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */
> #define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */
> #define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
> -#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
> +#define PCI_PM_CAP_PME_D3hot 0x4000 /* PME# from D3 (hot) */
> #define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
> #define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC
> */
> #define PCI_PM_CTRL 4 /* PM control and status register */
> --
> 2.27.0
>
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
