The Diamond Systems OPMM-1616-XT board is a PC/104 module with 16
optoisolated inputs and 16 relay outputs.
The PEARL-MM-P board is a PC/104 module with 16 relay outputs.
Both of these boards can be supported by the pcl730 driver.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gr...@linuxfoundation.org>
---
drivers/staging/comedi/Kconfig | 22 +++++++++++---------
drivers/staging/comedi/drivers/pcl730.c | 36 +++++++++++++++++++++++++++++++++
2 files changed, 48 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index 703c5d4..5d56428 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -160,16 +160,18 @@ config COMEDI_PCL730
Enable support for various simple ISA or PC/104 Digital I/O boards.
These boards all use 8-bit I/O ports.
- Advantech PCL-730 isolated - 16 in/16 out ttl - 16 in/16 out
- ICP ISO-730 isolated - 16 in/16 out ttl - 16 in/16 out
- ADlink ACL-7130 isolated - 16 in/16 out ttl - 16 in/16 out
- Advantech PCM-3730 isolated - 8 in/8 out ttl - 16 in/16 out
- Advantech PCL-725 isolated - 8 in/8 out
- ICP P8R8-DIO isolated - 8 in/8 out
- ADlink ACL-7225b isolated - 16 in/16 out
- ICP P16R16-DIO isolated - 16 in/16 out
- Advantech PCL-733 isolated - 32 in
- Advantech PCL-734 isolated - 32 out
+ Advantech PCL-730 iso - 16 in/16 out ttl - 16 in/16 out
+ ICP ISO-730 iso - 16 in/16 out ttl - 16 in/16 out
+ ADlink ACL-7130 iso - 16 in/16 out ttl - 16 in/16 out
+ Advantech PCM-3730 iso - 8 in/8 out ttl - 16 in/16 out
+ Advantech PCL-725 iso - 8 in/8 out
+ ICP P8R8-DIO iso - 8 in/8 out
+ ADlink ACL-7225b iso - 16 in/16 out
+ ICP P16R16-DIO iso - 16 in/16 out
+ Advantech PCL-733 iso - 32 in
+ Advantech PCL-734 iso - 32 out
+ Diamond Systems OPMM-1616-XT iso - 16 in/16 out
+ Diamond Systems PEARL-MM-P iso - 16 out
To compile this driver as a module, choose M here: the module will be
called pcl730.
diff --git a/drivers/staging/comedi/drivers/pcl730.c
b/drivers/staging/comedi/drivers/pcl730.c
index 2baaf1d..7fb044c 100644
--- a/drivers/staging/comedi/drivers/pcl730.c
+++ b/drivers/staging/comedi/drivers/pcl730.c
@@ -17,6 +17,8 @@
* (ICP) P16R16-DIO [p16r16dio]
* (Advantech) PCL-733 [pcl733]
* (Advantech) PCL-734 [pcl734]
+ * (Diamond Systems) OPMM-1616-XT [opmm-1616-xt]
+ * (Diamond Systems) PEARL-MM-P [prearl-mm-p]
* Author: José Luis Sánchez (jsanch...@teleline.es)
* Status: untested
*
@@ -70,6 +72,27 @@
* BASE+1 Isolated outputs 8-15 (write) or inputs 8-15 (read)
* BASE+2 Isolated outputs 16-23 (write) or inputs 16-23 (read)
* BASE+3 Isolated outputs 24-31 (write) or inputs 24-31 (read)
+ *
+ * The opmm-1616-xt board has this register mapping:
+ *
+ * BASE+0 Isolated outputs 0-7 (write) (read back)
+ * BASE+1 Isolated outputs 8-15 (write) (read back)
+ * BASE+2 Isolated inputs 0-7 (read)
+ * BASE+3 Isolated inputs 8-15 (read)
+ *
+ * These registers are not currently supported:
+ *
+ * BASE+2 Relay select register (write)
+ * BASE+3 Board reset control register (write)
+ * BASE+4 Interrupt control register (write)
+ * BASE+4 Change detect 7-0 status register (read)
+ * BASE+5 LED control register (write)
+ * BASE+5 Change detect 15-8 status register (read)
+ *
+ * The pearl-mm-p board has this register mapping:
+ *
+ * BASE+0 Isolated outputs 0-7 (write)
+ * BASE+1 Isolated outputs 8-15 (write)
*/
struct pcl730_board {
@@ -158,6 +181,19 @@ static const struct pcl730_board pcl730_boards[] = {
.io_range = 0x04,
.n_subdevs = 1,
.n_iso_out_chan = 32,
+ }, {
+ .name = "opmm-1616-xt",
+ .io_range = 0x10,
+ .is_acl7225b = 1,
+ .has_readback = 1,
+ .n_subdevs = 2,
+ .n_iso_out_chan = 16,
+ .n_iso_in_chan = 16,
+ }, {
+ .name = "pearl-mm-p",
+ .io_range = 0x02,
+ .n_subdevs = 1,
+ .n_iso_out_chan = 16,
},
};
--
1.9.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
