Correct spelling typo in rtl8188eu/hal
Signed-off-by: Masanari Iida <standby2...@gmail.com>
---
drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c | 2 +-
drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c | 8 ++++----
drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c | 4 ++--
drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c | 8 ++++----
drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c | 10 +++++-----
drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c | 2 +-
drivers/staging/rtl8188eu/hal/usb_halinit.c | 10 +++++-----
7 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
index e913a22..5700dbc 100644
--- a/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/rtl8188eu/hal/HalPwrSeqCmd.c
@@ -85,7 +85,7 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, u8 cut_vers,
u8 fab_vers,
value &= ~(GET_PWR_CFG_MASK(pwrcfgcmd));
value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) &
GET_PWR_CFG_MASK(pwrcfgcmd));
- /* Write the value back to sytem register */
+ /* Write the value back to system register */
rtw_write8(padapter, offset, value);
break;
case PWR_CMD_POLLING:
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
index 8c858775..0b0c68c 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_cmd.c
@@ -484,7 +484,7 @@ static void ConstructProbeRsp(struct adapter *adapt, u8
*pframe, u32 *pLength, u
*pLength = pktlen;
}
-/* To check if reserved page content is destroyed by beacon beacuse beacon is
too large. */
+/* To check if reserved page content is destroyed by beacon because beacon is
too large. */
/* 2010.06.23. Added by tynli. */
void CheckFwRsvdPageContent(struct adapter *Adapter)
{
@@ -496,9 +496,9 @@ void CheckFwRsvdPageContent(struct adapter *Adapter)
/* (1)Beacon, (2)Ps-poll, (3)Null data, (4)ProbeRsp. */
/* Input: */
/* bDLFinished - false: At the first time we will send all the packets
as a large packet to Hw, */
-/* so we need to set the packet
length to total lengh. */
+/* so we need to set the packet
length to total length. */
/* true: At the second time, we should send the
first packet (default:beacon) */
-/* to Hw again and set the lengh
in descriptor to the real beacon lengh. */
+/* to Hw again and set the length
in descriptor to the real beacon length. */
/* 2009.10.15 by tynli. */
static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
{
@@ -671,7 +671,7 @@ _func_enter_;
DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u,
poll:%u\n", __func__, DLBcnCount, poll);
/* */
/* We just can send the reserved page twice during the time
that Tx thread is stopped (e.g. pnpsetpower) */
- /* becuase we need to free the Tx BCN Desc which is used by
the first reserved page packet. */
+ /* because we need to free the Tx BCN Desc which is used by
the first reserved page packet. */
/* At run time, we cannot get the Tx Desc until it is released
in TxHandleInterrupt() so we will return */
/* the beacon TCB in the following code. 2011.11.23. by tynli.
*/
/* */
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
index 390ab39..51f03c3 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_hal_init.c
@@ -1651,7 +1651,7 @@ hal_EfusePgCheckAvailableAddr(
{
u16 efuse_max_available_len = 0;
- /* Change to check TYPE_EFUSE_MAP_LEN , beacuse 8188E raw 256, logic
map over 256. */
+ /* Change to check TYPE_EFUSE_MAP_LEN , because 8188E raw 256, logic
map over 256. */
EFUSE_GetEfuseDefinition(pAdapter, EFUSE_WIFI, TYPE_EFUSE_MAP_LEN,
(void *)&efuse_max_available_len, false);
if (Efuse_GetCurrentSize(pAdapter, efuseType, bPseudoTest) >=
efuse_max_available_len)
@@ -2098,7 +2098,7 @@ static u8 Hal_GetChnlGroup88E(u8 chnl, u8 *pGroup)
if (chnl <= 14) {
bIn24G = true;
- if (chnl < 3) /* Chanel 1-2 */
+ if (chnl < 3) /* Channel 1-2 */
*pGroup = 0;
else if (chnl < 6) /* Channel 3-5 */
*pGroup = 1;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
index ff468a6..68bb96d 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_phycfg.c
@@ -559,7 +559,7 @@ static int phy_BB8188E_Config_ParaFile(struct adapter
*Adapter)
/* */
/* 1. Read PHY_REG.TXT BB INIT!! */
- /* We will seperate as 88C / 92C according to chip version */
+ /* We will separate as 88C / 92C according to chip version */
/* */
if (HAL_STATUS_FAILURE ==
ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG))
rtStatus = _FAIL;
@@ -685,7 +685,7 @@ static u8 phy_DbmToTxPwrIdx(struct adapter *Adapter,
enum wireless_mode Wireless
/* */
/* Tested by MP, we found that CCK Index 0 equals to 8dbm, OFDM legacy
equals to */
- /* 3dbm, and OFDM HT equals to 0dbm repectively. */
+ /* 3dbm, and OFDM HT equals to 0dbm respectively. */
/* Note: */
/* The mapping may be different by different NICs. Do not use this
formula for what needs accurate result. */
/* By Bruce, 2008-01-29. */
@@ -1006,12 +1006,12 @@ _PHY_SetBWMode92C(
switch (pHalData->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
- /* 2007/02/07 Mark by Emily becasue we have not verify whether
this register works */
+ /* 2007/02/07 Mark by Emily because we have not verify whether
this register works */
rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
break;
case HT_CHANNEL_WIDTH_40:
regBwOpMode &= ~BW_OPMODE_20MHZ;
- /* 2007/02/07 Mark by Emily becasue we have not verify whether
this register works */
+ /* 2007/02/07 Mark by Emily because we have not verify whether
this register works */
rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
regRRSR_RSC = (regRRSR_RSC&0x90) |
(pHalData->nCur40MhzPrimeSC<<5);
rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
index bfdf9b3..299e03e 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188e_rf6052.c
@@ -181,7 +181,7 @@ i * Currently, we cannot fully disable driver
dynamic
* tx power mechanism because it is referenced by BT
* coexist mechanism.
* In the future, two mechanism shall be separated from
- * each other and maintained independantly. */
+ * each other and maintained independently. */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1) {
TxAGC[RF_PATH_A] = 0x10101010;
TxAGC[RF_PATH_B] = 0x10101010;
@@ -216,11 +216,11 @@ i * Currently, we cannot fully disable driver
dynamic
ODM_TxPwrTrackAdjust88E(&pHalData->odmpriv, 1, &direction,
&pwrtrac_value);
if (direction == 1) {
- /* Increase TX pwoer */
+ /* Increase TX power */
TxAGC[0] += pwrtrac_value;
TxAGC[1] += pwrtrac_value;
} else if (direction == 2) {
- /* Decrease TX pwoer */
+ /* Decrease TX power */
TxAGC[0] -= pwrtrac_value;
TxAGC[1] -= pwrtrac_value;
}
@@ -292,7 +292,7 @@ static void get_rx_power_val_by_reg(struct adapter
*Adapter, u8 Channel,
if (pHalData->pwrGroupCnt == 1)
chnlGroup = 0;
if (pHalData->pwrGroupCnt >= pHalData->PGMaxGroup) {
- if (Channel < 3) /*
Chanel 1-2 */
+ if (Channel < 3) /*
Channel 1-2 */
chnlGroup = 0;
else if (Channel < 6) /* Channel 3-5
*/
chnlGroup = 1;
@@ -349,7 +349,7 @@ static void get_rx_power_val_by_reg(struct adapter
*Adapter, u8 Channel,
}
/* 20100427 Joseph: Driver dynamic Tx power shall not affect Tx power. It
shall be determined by power training mechanism. */
/* Currently, we cannot fully disable driver dynamic tx power mechanism
because it is referenced by BT coexist mechanism. */
-/* In the future, two mechanism shall be separated from each other and
maintained independantly. Thanks for Lanhsin's reminder. */
+/* In the future, two mechanism shall be separated from each other and
maintained independently. Thanks for Lanhsin's reminder. */
/* 92d do not need this */
if (pdmpriv->DynamicTxHighPowerLvl == TxHighPwrLevel_Level1)
writeVal = 0x14141414;
diff --git a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
index bd8a9ae..8f43f49 100644
--- a/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
+++ b/drivers/staging/rtl8188eu/hal/rtl8188eu_xmit.c
@@ -332,7 +332,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8
*pmem, s32 sz, u8 bag
/* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
/* (1) The sequence number of each non-Qos frame / broadcast /
multicast / */
- /* mgnt frame should be controled by Hw because Fw will also send null
data */
+ /* mgnt frame should be controlled by Hw because Fw will also send
null data */
/* which we cannot control when Fw LPS enable. */
/* --> default enable non-Qos data sequense number. 2010.06.23. by
tynli. */
/* (2) Enable HW SEQ control for beacon packet, because we use Hw
beacon. */
diff --git a/drivers/staging/rtl8188eu/hal/usb_halinit.c
b/drivers/staging/rtl8188eu/hal/usb_halinit.c
index 5e656ce..cca9732 100644
--- a/drivers/staging/rtl8188eu/hal/usb_halinit.c
+++ b/drivers/staging/rtl8188eu/hal/usb_halinit.c
@@ -464,7 +464,7 @@ static void _InitRetryFunction(struct adapter *Adapter)
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingTxUpdate()
*
- * Overview: Seperate TX/RX parameters update independent for TP detection
and
+ * Overview: Separate TX/RX parameters update independent for TP detection
and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: struct adapter *
@@ -473,7 +473,7 @@ static void _InitRetryFunction(struct adapter *Adapter)
*
* Revised History:
* When Who Remark
- * 12/10/2010 MHC Seperate to smaller function.
+ * 12/10/2010 MHC Separate to smaller function.
*
*---------------------------------------------------------------------------*/
static void usb_AggSettingTxUpdate(struct adapter *Adapter)
@@ -496,7 +496,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)
/*-----------------------------------------------------------------------------
* Function: usb_AggSettingRxUpdate()
*
- * Overview: Seperate TX/RX parameters update independent for TP detection
and
+ * Overview: Separate TX/RX parameters update independent for TP detection
and
* dynamic TX/RX aggreagtion parameters update.
*
* Input: struct adapter *
@@ -505,7 +505,7 @@ static void usb_AggSettingTxUpdate(struct adapter *Adapter)
*
* Revised History:
* When Who Remark
- * 12/10/2010 MHC Seperate to smaller function.
+ * 12/10/2010 MHC Separate to smaller function.
*
*---------------------------------------------------------------------------*/
static void
@@ -847,7 +847,7 @@ _func_enter_;
/* */
/* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY
to patch */
- /* Hw bug which Hw initials RxFF boundry size to a value which is
larger than the real Rx buffer size in 88E. */
+ /* Hw bug which Hw initials RxFF boundary size to a value which is
larger than the real Rx buffer size in 88E. */
/* */
/* Enable MACTXEN/MACRXEN block */
value16 = rtw_read16(Adapter, REG_CR);
--
1.8.4.474.g128a96c
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
