The analog output channels use jumpers on the board to individually set
the range used. This driver uses the configuration options passed to the
(*attach) function to setup the analog output subdevice range_table_list
for each channel.
The configuration options should be 'it->options[2 + i]' for each channel 'i'
not '...[2 + 1]' for each channel. Fix the error and move the code so that
the range_table_list is setup before the subdevice is initialized.
Signed-off-by: H Hartley Sweeten <hswee...@visionengravers.com>
Cc: Ian Abbott <abbo...@mev.co.uk>
Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/staging/comedi/drivers/pcl726.c | 25 ++++++++++---------------
1 file changed, 10 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl726.c
b/drivers/staging/comedi/drivers/pcl726.c
index bcad27b..7952d87 100644
--- a/drivers/staging/comedi/drivers/pcl726.c
+++ b/drivers/staging/comedi/drivers/pcl726.c
@@ -268,9 +268,6 @@ static int pcl726_attach(struct comedi_device *dev, struct
comedi_devconfig *it)
if (!devpriv)
return -ENOMEM;
- for (i = 0; i < 12; i++)
- devpriv->rangelist[i] = &range_unknown;
-
/*
* Hook up the external trigger source interrupt only if the
* user config option is valid and the board supports interrupts.
@@ -284,6 +281,16 @@ static int pcl726_attach(struct comedi_device *dev, struct
comedi_devconfig *it)
}
}
+ /* setup the per-channel analog output range_table_list */
+ for (i = 0; i < 12; i++) {
+ unsigned int opt = it->options[2 + i];
+
+ if (opt < board->num_of_ranges && i < board->n_aochan)
+ devpriv->rangelist[i] = board->range_type_list[opt];
+ else
+ devpriv->rangelist[i] = &range_unknown;
+ }
+
ret = comedi_alloc_subdevices(dev, 3);
if (ret)
return ret;
@@ -298,18 +305,6 @@ static int pcl726_attach(struct comedi_device *dev, struct
comedi_devconfig *it)
s->insn_write = pcl726_ao_insn_write;
s->insn_read = pcl726_ao_insn_read;
s->range_table_list = devpriv->rangelist;
- for (i = 0; i < board->n_aochan; i++) {
- int j;
-
- j = it->options[2 + 1];
- if ((j < 0) || (j >= board->num_of_ranges)) {
- printk
- ("Invalid range for channel %d! Must be 0<=%d<%d\n",
- i, j, board->num_of_ranges - 1);
- j = 0;
- }
- devpriv->rangelist[i] = board->range_type_list[j];
- }
s = &dev->subdevices[1];
/* di */
--
1.8.3.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
