Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
arch/arm/boot/dts/r8a7791.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8a07505..d5f9ae06 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -637,6 +637,36 @@
status = "disabled";
};
+ du: du at feb00000 {
+ compatible = "renesas,du-r8a7791";
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+ reg-names = "du", "lvds.0";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+ <&mstp7_clks R8A7791_CLK_DU1>,
+ <&mstp7_clks R8A7791_CLK_LVDS0>;
+ clock-names = "du.0", "du.1", "lvds.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port at 1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
--
1.8.5.5
