On Thu, Nov 28, 2013 at 05:12:47PM +0000, Thomas Wood wrote:
> Parse 2D_VIC_order_X and 3D_Structure_X from the list at the end of the
> HDMI Vendor Specific Data Block.
>
> Signed-off-by: Thomas Wood <thomas.wood at intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 50
> ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 1dd82cd..eb6b363 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -2808,6 +2808,56 @@ do_hdmi_vsdb_modes(struct drm_connector *connector,
> const u8 *db, u8 len,
> video_len, i);
> }
>
> + if (hdmi_3d_len <= 4)
This number 4 should depend on the value of multi_present, no?
Also we haven't actually verified that all hdmi_3d_len bytes
fit within the data block. If you do that a bit earlier, you
could also skip the explicit 'len' checks for the
multi_present cases since we also check those against
hdmi_3d_len.
> + goto out;
> +
> + offset += 4;
> +
> + for (i = 0; i < (hdmi_3d_len - 4); i++) {
> + int vic_index;
> + struct drm_display_mode *newmode = NULL;
> + unsigned int newflag = 0;
> +
> + if (((db[8 + offset + i] & 0x0f) > 7)
> + && (i + 1 == hdmi_3d_len - 4))
> + break;
The '(db[8 + offset + i] & 0x0f) > 7' part is repeated a few times.
Maybe add a 'bool detail_present = (db[8 + offset + i] & 0x0f) > 7' or
something to make make things a bit easier to read.
> +
> + /* 2D_VIC_order_X */
> + vic_index = db[8 + offset + i] >> 4;
> +
> + /* 3D_Structure_X */
> + switch (db[8 + offset + i] & 0x0f) {
> + case 0:
> + newflag = DRM_MODE_FLAG_3D_FRAME_PACKING;
> + break;
> + case 6:
> + newflag = DRM_MODE_FLAG_3D_TOP_AND_BOTTOM;
> + break;
> + case 8:
Maybe add a /* 3D_Detail_X */ comment here
for consistency with the other comments.
> + if ((db[9 + offset + i] >> 4) == 1)
> + newflag = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF;
> + break;
> + }
> +
> + if (newflag != 0) {
> + newmode = drm_display_mode_from_vic_index(connector,
> + video_db,
> + video_len,
> + vic_index);
> +
> + if (newmode) {
> + newmode->flags |= newflag;
> + drm_mode_probed_add(connector, newmode);
> + modes++;
> + }
> + }
> +
> + if ((db[8 + offset + i] & 0x0f) > 7) {
> + /* Optional 3D_Detail_X and reserved */
> + i++;
> + }
> + }
> +
> out:
> return modes;
> }
> --
> 1.8.4.2
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Ville Syrj?l?
Intel OTC
