On vanilla 3.9.0-rc3, I get this 100% repeatable oops after login when
the user X session is coming up:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
IP: [<0000000000000001>] 0x0
PGD 0
Oops: 0010 [#1] PREEMPT SMP
Modules linked in: ip6table_filter ip6_tables ebtable_nat ebtables ...<snip>...
CPU 3
Pid: 0, comm: swapper/3 Not tainted 3.9.0-rc3-xeon #rc3 Dell Inc. Precision
WorkStation T5400 /0RW203
RIP: 0010:[<0000000000000001>] [<0000000000000001>] 0x0
RSP: 0018:ffff8802afcc3d80 EFLAGS: 00010087
RAX: ffff88029f6e5808 RBX: 0000000000000001 RCX: 0000000000000000
RDX: 0000000000000096 RSI: 0000000000000001 RDI: ffff88029f6e5808
RBP: ffff8802afcc3dc8 R08: 0000000000000000 R09: 0000000000000004
R10: 000000000000002c R11: ffff88029e559a98 R12: ffff8802a376cb78
R13: ffff88029f6e57e0 R14: ffff88029f6e57f8 R15: ffff88029f6e5808
FS: 0000000000000000(0000) GS:ffff8802afcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000001 CR3: 000000029fa67000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper/3 (pid: 0, threadinfo ffff8802a355e000, task ffff8802a3535c40)
Stack:
ffffffffa0159d8a 0000000000000082 ffff88029f6e5820 0000000000000001
ffff88029f71aa00 0000000000000000 0000000000000000 0000000004000000
0000000004000000 ffff8802afcc3e38 ffffffffa01843b5 ffff8802afcc3df8
Call Trace:
<IRQ>
[<ffffffffa0159d8a>] ? nouveau_event_trigger+0xaa/0xe0 [nouveau]
[<ffffffffa01843b5>] nv50_disp_intr+0xc5/0x200 [nouveau]
[<ffffffff816fbacc>] ? _raw_spin_unlock_irqrestore+0x2c/0x50
[<ffffffff816ff98d>] ? notifier_call_chain+0x4d/0x70
[<ffffffffa017a105>] nouveau_mc_intr+0xb5/0x110 [nouveau]
[<ffffffffa01d45ff>] nouveau_irq_handler+0x6f/0x80 [nouveau]
[<ffffffff810eec95>] handle_irq_event_percpu+0x75/0x260
[<ffffffff810eeec8>] handle_irq_event+0x48/0x70
[<ffffffff810f205a>] handle_fasteoi_irq+0x5a/0x100
[<ffffffff810182f2>] handle_irq+0x22/0x40
[<ffffffff8170561a>] do_IRQ+0x5a/0xd0
[<ffffffff816fc2ad>] common_interrupt+0x6d/0x6d
<EOI>
[<ffffffff810449b6>] ? native_safe_halt+0x6/0x10
[<ffffffff8101ea1d>] default_idle+0x3d/0x170
[<ffffffff8101f736>] cpu_idle+0x116/0x130
[<ffffffff816e2a06>] start_secondary+0x251/0x258
Code: Bad RIP value.
RIP [<0000000000000001>] 0x0
RSP <ffff8802afcc3d80>
CR2: 0000000000000001
---[ end trace 907323cb8ce6f301 ]---
git bisect from 3.8.0 (good) to 3.9.0-rc3 (bad) blames (bisect log
attached):
1d7c71a3e2f77336df536855b0efd2dc5bdeb41b is the first bad commit
commit 1d7c71a3e2f77336df536855b0efd2dc5bdeb41b
Author: Ben Skeggs <bskeggs at redhat.com>
Date: Thu Jan 31 09:23:34 2013 +1000
drm/nouveau/disp: port vblank handling to event interface
This removes the nastiness with the interactions between display and
software engines when handling vblank semaphore release interrupts.
Now, all the semantics are handled in one place (sw) \o/.
Signed-off-by: Ben Skeggs <bskeggs at redhat.com>
:040000 040000 fbd44f8566271415fd2775ab4b6346efef7e82fe
a0730be0f35feaa1476b1447b1d65c4b3b3c0686 M drivers
On this hardware:
nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x084e00a2
nouveau [ DEVICE][0000:02:00.0] Chipset: G84 (NV84)
nouveau [ DEVICE][0000:02:00.0] Family : NV50
nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:02:00.0] BIT signature found
nouveau [ VBIOS][0000:02:00.0] version 60.84.63.00.11
nouveau [ PFB][0000:02:00.0] RAM type: DDR2
nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
nouveau [ PFB][0000:02:00.0] ZCOMP: 1892 tags
nouveau [ DRM] VRAM: 256 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] BIT BIOS found
nouveau [ DRM] Bios version 60.84.63.00
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 02000300 00000028
nouveau [ DRM] DCB outp 01: 01000302 00000030
nouveau [ DRM] DCB outp 02: 04011310 00000028
nouveau [ DRM] DCB outp 03: 02011312 00000030
nouveau [ DRM] DCB conn 00: 1030
nouveau [ DRM] DCB conn 01: 2130
nouveau [ DRM] 2 available performance level(s)
nouveau [ DRM] 0: core 208MHz shader 416MHz memory 100MHz voltage 1200mV
fanspeed 100%
nouveau [ DRM] 1: core 460MHz shader 920MHz memory 400MHz voltage 1200mV
fanspeed 100%
nouveau [ DRM] c: core 459MHz shader 918MHz memory 399MHz voltage 1200mV
nouveau [ DRM] MM: using CRYPT for buffer copies
nouveau [ DRM] allocated 1680x1050 fb: 0x60000, bo ffff88029ef50400
fbcon: nouveaufb (fb0) is primary device
nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:02:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.0 20120801 for 0000:02:00.0 on minor 0
02:00.0 VGA compatible controller: NVIDIA Corporation G84 [Quadro FX 570] (rev
a1) (prog-if 00 [VGA controller])
Subsystem: NVIDIA Corporation Device 0474
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at dc80 [size=128]
Expansion ROM at fbd00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #8, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nouveau_crash_3.9.0-rc3.log
Type: text/x-log
Size: 15201 bytes
Desc: not available
URL:
<http://lists.freedesktop.org/archives/dri-devel/attachments/20130319/12556fc0/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nouveau_bisect_3.9.0-rc3.log
Type: text/x-log
Size: 1531 bytes
Desc: not available
URL:
<http://lists.freedesktop.org/archives/dri-devel/attachments/20130319/12556fc0/attachment-0003.bin>
