[PATCH 8/9] ARM/dts: add phy property to exynos5250 hdmi dt node

[Rahul Sharma]

Add property to hdmi node to get phandle for hdmiphy node. This
is required to check the compatible type of phy in hdmi driver.
If phy is compatible to exynos5420, it needs to be treated as a
platform device rather than a i2c device.

Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts 
b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 0ec6856..239341d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -101,7 +101,7 @@
                samsung,i2c-sda-delay = <100>;
                samsung,i2c-max-bus-freq = <66000>;

-               hdmiphy at 38 {
+               hdmiphy: hdmiphy at 38 {
                        compatible = "samsung,exynos4210-hdmiphy";
                        reg = <0x38>;
                };
@@ -187,6 +187,7 @@

        hdmi {
                hpd-gpio = <&gpx3 7 0>;
+               phy = <&hdmiphy>;
        };

        codec at 11000000 {
-- 
1.7.10.4