From: Marek Ol??k <marek.ol...@amd.com>

Signed-off-by: Marek Ol??k <marek.olsak at amd.com>
---
 drivers/gpu/drm/radeon/atombios_crtc.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c 
b/drivers/gpu/drm/radeon/atombios_crtc.c
index b197059..ec97bad 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1180,19 +1180,12 @@ static int dce4_crtc_do_set_base(struct drm_crtc *crtc,
                fb_format |= 
EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);

        if (rdev->family >= CHIP_BONAIRE) {
-               u32 num_pipe_configs = rdev->config.cik.max_tile_pipes;
-               u32 num_rb = rdev->config.cik.max_backends_per_se;
-               if (num_pipe_configs > 8)
-                       num_pipe_configs = 8;
-               if (num_pipe_configs == 8)
-                       fb_format |= 
CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P8_32x32_16x16);
-               else if (num_pipe_configs == 4) {
-                       if (num_rb == 4)
-                               fb_format |= 
CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P4_16x16);
-                       else if (num_rb < 4)
-                               fb_format |= 
CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P4_8x16);
-               } else if (num_pipe_configs == 2)
-                       fb_format |= CIK_GRPH_PIPE_CONFIG(CIK_ADDR_SURF_P2);
+               /* Read the pipe config from the 2D TILED SCANOUT mode.
+                * It should be the same for the other modes too, but not all
+                * modes set the pipe config field. */
+               u32 pipe_config = (rdev->config.cik.tile_mode_array[10] >> 6) & 
0x1f;
+
+               fb_format |= CIK_GRPH_PIPE_CONFIG(pipe_config);
        } else if ((rdev->family == CHIP_TAHITI) ||
                   (rdev->family == CHIP_PITCAIRN))
                fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
-- 
1.8.3.2

Reply via email to