On Wed, Aug 28, 2013 at 01:40:59PM +0300, Mikko Perttunen wrote:
> Add hdmi node to Dalmore device tree to supply Dalmore-specific
s/hdmi/HDMI/
> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts
> b/arch/arm/boot/dts/tegra114-dalmore.dts
[...]
> + host1x {
> + hdmi {
> + status = "okay";
> +
> + vdd-supply = <&vdd_hdmi_reg>;
> + pll-supply = <&palmas_smps3_reg>;
> + nvidia,ddc-i2c-bus = <&hdmi_ddc>;
I prefer to use a blank line to separate "standard" from
"vendor-specific" properties.
> + nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
> GPIO_ACTIVE_HIGH>;
Other .dts files split this so it doesn't exceed 80 characters. I'm not
sure how useful that is as a general rule for DT source files, though.
> i2c at 7000d000 {
> status = "okay";
> clock-frequency = <400000>;
> @@ -1169,6 +1184,8 @@
> regulator-min-microvolt = <5000000>;
> regulator-max-microvolt = <5000000>;
> enable-active-high;
> + regulator-always-on;
> + regulator-boot-on;
This warrants at least a mention in the commit message.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL:
<http://lists.freedesktop.org/archives/dri-devel/attachments/20130828/d7c60c76/attachment.pgp>
