We need to allocate line buffer to each display when
setting up the watermarks. Failure to do so can lead
to a blank screen. This fixes blank screen problems
on dce8 asics.
Based on an initial fix from:
Jay Cornwall <jay.cornwall at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Cc: stable at vger.kernel.org
---
drivers/gpu/drm/radeon/cik.c | 29 ++++++++++++++++++++++-------
drivers/gpu/drm/radeon/cikd.h | 4 ++++
2 files changed, 26 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 582f8e4..1942571 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -7367,8 +7367,8 @@ static u32 dce8_line_buffer_adjust(struct radeon_device
*rdev,
struct radeon_crtc *radeon_crtc,
struct drm_display_mode *mode)
{
- u32 tmp;
-
+ u32 tmp, buffer_alloc, i;
+ u32 pipe_offset = radeon_crtc->crtc_id * 0x20;
/*
* Line Buffer Setup
* There are 6 line buffers, one for each display controllers.
@@ -7378,22 +7378,37 @@ static u32 dce8_line_buffer_adjust(struct radeon_device
*rdev,
* them using the stereo blender.
*/
if (radeon_crtc->base.enabled && mode) {
- if (mode->crtc_hdisplay < 1920)
+ if (mode->crtc_hdisplay < 1920) {
tmp = 1;
- else if (mode->crtc_hdisplay < 2560)
+ buffer_alloc = 2;
+ } else if (mode->crtc_hdisplay < 2560) {
tmp = 2;
- else if (mode->crtc_hdisplay < 4096)
+ buffer_alloc = 2;
+ } else if (mode->crtc_hdisplay < 4096) {
tmp = 0;
- else {
+ buffer_alloc = (rdev->flags & RADEON_IS_IGP) ? 2 : 4;
+ } else {
DRM_DEBUG_KMS("Mode too big for LB!\n");
tmp = 0;
+ buffer_alloc = (rdev->flags & RADEON_IS_IGP) ? 2 : 4;
}
- } else
+ } else {
tmp = 1;
+ buffer_alloc = 0;
+ }
WREG32(LB_MEMORY_CTRL + radeon_crtc->crtc_offset,
LB_MEMORY_CONFIG(tmp) | LB_MEMORY_SIZE(0x6B0));
+ WREG32(PIPE0_DMIF_BUFFER_CONTROL + pipe_offset,
+ DMIF_BUFFERS_ALLOCATED(buffer_alloc));
+ for (i = 0; i < rdev->usec_timeout; i++) {
+ if (RREG32(PIPE0_DMIF_BUFFER_CONTROL + pipe_offset) &
+ DMIF_BUFFERS_ALLOCATED_COMPLETED)
+ break;
+ udelay(1);
+ }
+
if (radeon_crtc->base.enabled && mode) {
switch (tmp) {
case 0:
diff --git a/drivers/gpu/drm/radeon/cikd.h b/drivers/gpu/drm/radeon/cikd.h
index 6a92f49..203d2a0 100644
--- a/drivers/gpu/drm/radeon/cikd.h
+++ b/drivers/gpu/drm/radeon/cikd.h
@@ -393,6 +393,10 @@
#define DMIF_ADDR_CALC 0xC00
+#define PIPE0_DMIF_BUFFER_CONTROL 0x0ca0
+# define DMIF_BUFFERS_ALLOCATED(x) ((x) << 0)
+# define DMIF_BUFFERS_ALLOCATED_COMPLETED (1 << 4)
+
#define SRBM_GFX_CNTL 0xE44
#define PIPEID(x) ((x) <<
0)
#define MEID(x) ((x) <<
2)
--
1.8.3.1
