On Mon, 2012-06-25 at 21:14 +0200, Paul Menzel wrote: > > resuming from suspend to RAM the monitor was indicating by a blinking > LED that it did not receive any signal. This is the first time this > happened. Resuming from suspend to RAM had worked without problems > before (and probably will work again the next tries). > > Logging in from SSH worked fine though. Switching terminal to tty1 > nothing changed but going back to tty7, where X was supposed to run), > and the monitor detected a signal and showed the screensaver. > > Switching to tty1 still does not work though, that means the monitor > indicates that it gets no signal.
What about tty2-6 or any others? What does fbset -i say when the problem occurs? -- Earthling Michel D?nzer | http://www.amd.com Libre software enthusiast | Debian, X and DRI developer -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 190 bytes Desc: This is a digitally signed message part URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20120626/35350dcd/attachment.pgp>