> -----Original Message-----
> From: dri-devel-bounces+inki.dae=samsung.com at lists.freedesktop.org
> [mailto:dri-devel-bounces+inki.dae=samsung.com at lists.freedesktop.org] On
> Behalf Of Inki Dae
> Sent: Wednesday, December 12, 2012 6:42 PM
> To: 'Eunchul Kim'
> Cc: jy0.jeon at samsung.com; sw0312.kim at samsung.com; jaejoon.seo at
> samsung.com;
> kyungmin.park at samsung.com; dri-devel at lists.freedesktop.org;
> jmock.shin at samsung.com
> Subject: RE: [RFC v3 4/5] drm/exynos: add rotator ipp driver
>
>
>
> > -----Original Message-----
> > From: Eunchul Kim [mailto:chulspro.kim at samsung.com]
> > Sent: Wednesday, December 12, 2012 6:26 PM
> > To: Inki Dae
> > Cc: dri-devel at lists.freedesktop.org; jy0.jeon at samsung.com;
> > yj44.cho at samsung.com; jmock.shin at samsung.com; jaejoon.seo at
> > samsung.com;
> > kyungmin.park at samsung.com; sw0312.kim at samsung.com; Joonyoung Shim
> > Subject: Re: [RFC v3 4/5] drm/exynos: add rotator ipp driver
> >
> > Thank's your comment.
> >
> > I answer your comment. please check that.
> >
> > Thank's
> >
> > BR
> > Eunchul Kim
> >
> > On 12/12/2012 05:29 PM, Inki Dae wrote:
> > >
> > >
> > >> -----Original Message-----
> > >> From: Eunchul Kim [mailto:chulspro.kim at samsung.com]
> > >> Sent: Wednesday, December 12, 2012 4:35 PM
> > >> To: dri-devel at lists.freedesktop.org; inki.dae at samsung.com
> > >> Cc: jy0.jeon at samsung.com; yj44.cho at samsung.com;
> jmock.shin at samsung.com;
> > >> jaejoon.seo at samsung.com; kyungmin.park at samsung.com;
> > >> chulspro.kim at samsung.com
> > >> Subject: [RFC v3 4/5] drm/exynos: add rotator ipp driver
> > >>
> > >> Rotator supports rotation/crop/flip and input/output DMA operations
> > >> Rotator ipp driver supports 90,180,270 degree rotaion and vertical,
> > >> horizontal flip.
> > >> and has some limitations(source and destination format have to be
> same,
> > no
> > >> scaler)
> > >>
> > >> Signed-off-by: Eunchul Kim <chulspro.kim at samsung.com>
> > >> Signed-off-by: Youngjun Cho <yj44.cho at samsung.com>
> > >> ---
> > >> drivers/gpu/drm/exynos/Kconfig | 7 +
> > >> drivers/gpu/drm/exynos/Makefile | 1 +
> > >> drivers/gpu/drm/exynos/exynos_drm_drv.c | 15 +
> > >> drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 +
> > >> drivers/gpu/drm/exynos/exynos_drm_rotator.c | 829
> > >> +++++++++++++++++++++++++++
> > >> drivers/gpu/drm/exynos/exynos_drm_rotator.h | 13 +
> > >> drivers/gpu/drm/exynos/regs-rotator.h | 73 +++
> > >> 7 files changed, 939 insertions(+), 0 deletions(-)
> > >> create mode 100644 drivers/gpu/drm/exynos/exynos_drm_rotator.c
> > >> create mode 100644 drivers/gpu/drm/exynos/exynos_drm_rotator.h
> > >> create mode 100644 drivers/gpu/drm/exynos/regs-rotator.h
> > >>
> > >> diff --git a/drivers/gpu/drm/exynos/Kconfig
> > >> b/drivers/gpu/drm/exynos/Kconfig
> > >> index 4915ab6..4860835 100644
> > >> --- a/drivers/gpu/drm/exynos/Kconfig
> > >> +++ b/drivers/gpu/drm/exynos/Kconfig
> > >> @@ -57,3 +57,10 @@ config DRM_EXYNOS_FIMC
> > >> depends on DRM_EXYNOS_IPP
> > >> help
> > >> Choose this option if you want to use Exynos FIMC for DRM.
> > >> +
> > >> +config DRM_EXYNOS_ROTATOR
> > >> + bool "Exynos DRM Rotator"
> > >> + depends on DRM_EXYNOS_IPP
> > >> + help
> > >> + Choose this option if you want to use Exynos Rotator for
DRM.
> > >> +
> > >> diff --git a/drivers/gpu/drm/exynos/Makefile
> > >> b/drivers/gpu/drm/exynos/Makefile
> > >> index 9710024..3b70668 100644
> > >> --- a/drivers/gpu/drm/exynos/Makefile
> > >> +++ b/drivers/gpu/drm/exynos/Makefile
> > >> @@ -18,5 +18,6 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_VIDI) +=
> > >> exynos_drm_vidi.o
> > >> exynosdrm-$(CONFIG_DRM_EXYNOS_G2D) += exynos_drm_g2d.o
> > >> exynosdrm-$(CONFIG_DRM_EXYNOS_IPP) += exynos_drm_ipp.o
> > >> exynosdrm-$(CONFIG_DRM_EXYNOS_FIMC) += exynos_drm_fimc.o
> > >> +exynosdrm-$(CONFIG_DRM_EXYNOS_ROTATOR) += exynos_drm_rotator.o
> > >>
> > >> obj-$(CONFIG_DRM_EXYNOS) += exynosdrm.o
> > >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> > >> b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> > >> index 73f02ac..09d884b 100644
> > >> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> > >> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> > >> @@ -378,6 +378,12 @@ static int __init exynos_drm_init(void)
> > >> goto out_fimc;
> > >> #endif
> > >>
> > >> +#ifdef CONFIG_DRM_EXYNOS_ROTATOR
> > >> + ret = platform_driver_register(&rotator_driver);
> > >> + if (ret < 0)
> > >> + goto out_rotator;
> > >> +#endif
> > >> +
> > >> #ifdef CONFIG_DRM_EXYNOS_IPP
> > >> ret = platform_driver_register(&ipp_driver);
> > >> if (ret < 0)
> > >> @@ -406,6 +412,11 @@ out_drm:
> > >> out_ipp:
> > >> #endif
> > >>
> > >> +#ifdef CONFIG_DRM_EXYNOS_ROTATOR
> > >> + platform_driver_unregister(&rotator_driver);
> > >> +out_rotator:
> > >> +#endif
> > >> +
> > >> #ifdef CONFIG_DRM_EXYNOS_FIMC
> > >> platform_driver_unregister(&fimc_driver);
> > >> out_fimc:
> > >> @@ -451,6 +462,10 @@ static void __exit exynos_drm_exit(void)
> > >> platform_driver_unregister(&ipp_driver);
> > >> #endif
> > >>
> > >> +#ifdef CONFIG_DRM_EXYNOS_ROTATOR
> > >> + platform_driver_unregister(&rotator_driver);
> > >> +#endif
> > >> +
> > >> #ifdef CONFIG_DRM_EXYNOS_FIMC
> > >> platform_driver_unregister(&fimc_driver);
> > >> #endif
> > >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> > >> b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> > >> index 14f9490..a74e37c 100644
> > >> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> > >> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> > >> @@ -353,5 +353,6 @@ extern struct platform_driver
> > >> exynos_drm_common_hdmi_driver;
> > >> extern struct platform_driver vidi_driver;
> > >> extern struct platform_driver g2d_driver;
> > >> extern struct platform_driver fimc_driver;
> > >> +extern struct platform_driver rotator_driver;
> > >> extern struct platform_driver ipp_driver;
> > >> #endif
> > >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.c
> > >> b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
> > >> new file mode 100644
> > >> index 0000000..121569c
> > >> --- /dev/null
> > >> +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.c
> > >> @@ -0,0 +1,829 @@
> > >> +/*
> > >> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> > >> + * Authors:
> > >> + * YoungJun Cho <yj44.cho at samsung.com>
> > >> + * Eunchul Kim <chulspro.kim at samsung.com>
> > >> + *
> > >> + * This program is free software; you can redistribute it and/or
> > modify
> > >> + * it under the terms of the GNU General Public License version 2 as
> > >> + * published by the Free Software Foundationr
> > >> + */
> > >> +
> > >> +#include <linux/kernel.h>
> > >> +#include <linux/module.h>
> > >> +#include <linux/err.h>
> > >> +#include <linux/interrupt.h>
> > >> +#include <linux/io.h>
> > >> +#include <linux/platform_device.h>
> > >> +#include <linux/clk.h>
> > >> +#include <linux/pm_runtime.h>
> > >> +
> > >> +#include <drm/drmP.h>
> > >> +#include <drm/exynos_drm.h>
> > >> +#include "regs-rotator.h"
> > >> +#include "exynos_drm.h"
> > >> +#include "exynos_drm_ipp.h"
> > >> +
> > >> +/*
> > >> + * Rotator supports image crop/rotator and input/output DMA
> operations.
> > >> + * input DMA reads image data from the memory.
> > >> + * output DMA writes image data to memory.
> > >> + */
> > >> +
> > >> +#define get_rot_context(dev)
> > >> platform_get_drvdata(to_platform_device(dev))
> > >> +#define get_ctx_from_ippdrv(ippdrv) container_of(ippdrv,\
> > >> + struct rot_context, ippdrv);
> > >> +#define rot_read(offset) readl(rot->regs + (offset))
> > >> +#define rot_write(cfg, offset) writel(cfg, rot->regs + (offset))
> > >> +
> > >> +enum rot_irq_status {
> > >> + ROT_IRQ_STATUS_COMPLETE = 8,
> > >> + ROT_IRQ_STATUS_ILLEGAL = 9,
> > >> +};
> > >> +
> > >> +/*
> > >> + * A structure of limitation.
> > >> + *
> > >> + * @min_w: minimum width.
> > >> + * @min_h: minimum height.
> > >> + * @max_w: maximum width.
> > >> + * @max_h: maximum height.
> > >> + * @align: align size.
> > >> + */
> > >> +struct rot_limit {
> > >> + u32 min_w;
> > >> + u32 min_h;
> > >> + u32 max_w;
> > >> + u32 max_h;
> > >> + u32 align;
> > >> +};
> > >> +
> > >> +/*
> > >> + * A structure of limitation table.
> > >> + *
> > >> + * @ycbcr420_2p: case of YUV.
> > >> + * @rgb888: case of RGB.
> > >> + */
> > >> +struct rot_limit_table {
> > >> + struct rot_limit ycbcr420_2p;
> > >> + struct rot_limit rgb888;
> > >> +};
> > >> +
> > >> +/*
> > >> + * A structure of rotator context.
> > >> + * @ippdrv: prepare initialization using ippdrv.
> > >> + * @regs_res: register resources.
> > >> + * @regs: memory mapped io registers.
> > >> + * @clock: rotator gate clock.
> > >> + * @limit_tbl: limitation of rotator.
> > >> + * @irq: irq number.
> > >> + * @cur_buf_id: current operation buffer id.
> > >> + * @suspended: suspended state.
> > >> + */
> > >> +struct rot_context {
> > >> + struct exynos_drm_ippdrv ippdrv;
> > >> + struct resource *regs_res;
> > >> + void __iomem *regs;
> > >> + struct clk *clock;
> > >> + struct rot_limit_table *limit_tbl;
> > >> + int irq;
> > >> + int cur_buf_id[EXYNOS_DRM_OPS_MAX];
> > >> + bool suspended;
> > >> +};
> > >> +
> > >> +static void rotator_reg_set_irq(struct rot_context *rot, bool
enable)
> > >> +{
> > >> + u32 val = rot_read(ROT_CONFIG);
> > >> +
> > >> + if (enable == true)
> > >> + val |= ROT_CONFIG_IRQ;
> > >> + else
> > >> + val &= ~ROT_CONFIG_IRQ;
> > >> +
> > >> + rot_write(val, ROT_CONFIG);
> > >> +}
> > >> +
> > >> +static u32 rotator_reg_get_format(struct rot_context *rot)
> > >> +{
> > >> + u32 val = rot_read(ROT_CONTROL);
> > >> +
> > >> + val &= ROT_CONTROL_FMT_MASK;
> > >> +
> > >> + return val;
> > >> +}
> > >> +
> > >> +static enum rot_irq_status rotator_reg_get_irq_status(struct
> > rot_context
> > >> *rot)
> > >> +{
> > >> + u32 val = rot_read(ROT_STATUS);
> > >> +
> > >> + val = ROT_STATUS_IRQ(val);
> > >> +
> > >> + if (val == ROT_STATUS_IRQ_VAL_COMPLETE)
> > >> + return ROT_IRQ_STATUS_COMPLETE;
> > >> + else
> > >
> > > Remove else.
> >
> > - done.
> >
> > >
> > >> + return ROT_IRQ_STATUS_ILLEGAL;
> > >> +}
> > >> +
> > >> +static irqreturn_t rotator_irq_handler(int irq, void *arg)
> > >> +{
> > >> + struct rot_context *rot = arg;
> > >> + struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv;
> > >> + struct drm_exynos_ipp_cmd_node *c_node = ippdrv->cmd;
> > >> + struct drm_exynos_ipp_event_work *event_work =
c_node->event_work;
> > >> + enum rot_irq_status irq_status;
> > >> + u32 val;
> > >> +
> > >> + /* Get execution result */
> > >> + irq_status = rotator_reg_get_irq_status(rot);
> > >> +
> > >> + /* clear status */
> > >> + val = rot_read(ROT_STATUS);
> > >> + val |= ROT_STATUS_IRQ_PENDING((u32)irq_status);
> > >> + rot_write(val, ROT_STATUS);
> > >> +
> > >> + if (irq_status == ROT_IRQ_STATUS_COMPLETE) {
> > >> + event_work->ippdrv = ippdrv;
> > >> + event_work->buf_id[EXYNOS_DRM_OPS_DST] =
> > >> + rot->cur_buf_id[EXYNOS_DRM_OPS_DST];
> > >> + queue_work(ippdrv->event_workq,
> > >> + (struct work_struct *)event_work);
> > >> + } else
> > >> + DRM_ERROR("the SFR is set illegally\n");
> > >> +
> > >> + return IRQ_HANDLED;
> > >> +}
> > >> +
> > >> +static void rotator_align_size(struct rot_context *rot, u32 fmt, u32
> > >> *hsize,
> > >> + u32 *vsize)
> > >> +{
> > >> + struct rot_limit_table *limit_tbl = rot->limit_tbl;
> > >> + struct rot_limit *limit;
> > >> + u32 mask, val;
> > >> +
> > >> + /* Get size limit */
> > >> + if (fmt == ROT_CONTROL_FMT_RGB888)
> > >> + limit = &limit_tbl->rgb888;
> > >> + else
> > >> + limit = &limit_tbl->ycbcr420_2p;
> > >> +
> > >> + /* Get mask for rounding to nearest aligned val */
> > >> + mask = ~((1 << limit->align) - 1);
> > >> +
> > >> + /* Set aligned width */
> > >> + val = ROT_ALIGN(*hsize, limit->align, mask);
> > >> + if (val < limit->min_w)
> > >> + *hsize = ROT_MIN(limit->min_w, mask);
> > >> + else if (val > limit->max_w)
> > >> + *hsize = ROT_MAX(limit->max_w, mask);
> > >> + else
> > >> + *hsize = val;
> > >> +
> > >> + /* Set aligned height */
> > >> + val = ROT_ALIGN(*vsize, limit->align, mask);
> > >> + if (val < limit->min_h)
> > >> + *vsize = ROT_MIN(limit->min_h, mask);
> > >> + else if (val > limit->max_h)
> > >> + *vsize = ROT_MAX(limit->max_h, mask);
> > >> + else
> > >> + *vsize = val;
> > >> +}
> > >> +
> > >> +static int rotator_src_set_fmt(struct device *dev, u32 fmt)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + u32 val;
> > >> +
> > >> + val = rot_read(ROT_CONTROL);
> > >> + val &= ~ROT_CONTROL_FMT_MASK;
> > >> +
> > >> + switch (fmt) {
> > >> + case DRM_FORMAT_NV12:
> > >> + val |= ROT_CONTROL_FMT_YCBCR420_2P;
> > >> + break;
> > >> + case DRM_FORMAT_XRGB8888:
> > >> + val |= ROT_CONTROL_FMT_RGB888;
> > >> + break;
> > >> + default:
> > >> + DRM_ERROR("invalid image format\n");
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + rot_write(val, ROT_CONTROL);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int rotator_src_set_size(struct device *dev, int swap,
> > >> + struct drm_exynos_pos *pos,
> > >> + struct drm_exynos_sz *sz)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + u32 fmt, hsize, vsize;
> > >> + u32 val;
> > >> +
> > >> + /* Get format */
> > >> + fmt = rotator_reg_get_format(rot);
> > >> +
> > >> + /* Align buffer size */
> > >> + hsize = sz->hsize;
> > >> + vsize = sz->vsize;
> > >> + rotator_align_size(rot, fmt, &hsize, &vsize);
> > >> +
> > >> + /* Set buffer size configuration */
> > >> + val = ROT_SET_BUF_SIZE_H(vsize) | ROT_SET_BUF_SIZE_W(hsize);
> > >> + rot_write(val, ROT_SRC_BUF_SIZE);
> > >> +
> > >> + /* Set crop image position configuration */
> > >> + val = ROT_CROP_POS_Y(pos->y) | ROT_CROP_POS_X(pos->x);
> > >> + rot_write(val, ROT_SRC_CROP_POS);
> > >> + val = ROT_SRC_CROP_SIZE_H(pos->h) |
ROT_SRC_CROP_SIZE_W(pos->w);
> > >> + rot_write(val, ROT_SRC_CROP_SIZE);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int rotator_src_set_addr(struct device *dev,
> > >> + struct drm_exynos_ipp_buf_info *buf_info,
> > >> + u32 buf_id, enum drm_exynos_ipp_buf_type buf_type)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + dma_addr_t addr[EXYNOS_DRM_PLANAR_MAX];
> > >> + u32 val, fmt, hsize, vsize;
> > >> + int i;
> > >> +
> > >> + /* Set current buf_id */
> > >> + rot->cur_buf_id[EXYNOS_DRM_OPS_SRC] = buf_id;
> > >> +
> > >> + switch (buf_type) {
> > >> + case IPP_BUF_ENQUEUE:
> > >> + /* Set address configuration */
> > >> + for_each_ipp_planar(i)
> > >> + addr[i] = buf_info->base[i];
> > >
> > > Check NULL.
> >
> > - If not copy this state, we need to memset about addr.
> > no need check null.
> >
> > >
> > >> +
> > >> + /* Get format */
> > >> + fmt = rotator_reg_get_format(rot);
> > >> +
> > >> + /* Re-set cb planar for NV12 format */
> > >> + if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) &&
> > >> + (addr[EXYNOS_DRM_PLANAR_CB]
==
> > > 0x00)) {
> > >
> > > What is 0x00?
> >
> > - It is NULL, I changed !addr instead of addr == 0x00
> >
> > >
> > >> +
> > >> + val = rot_read(ROT_SRC_BUF_SIZE);
> > >> + hsize = ROT_GET_BUF_SIZE_W(val);
> > >> + vsize = ROT_GET_BUF_SIZE_H(val);
> > >> +
> > >> + /* Set cb planar */
> > >> + addr[EXYNOS_DRM_PLANAR_CB] =
> > >> + addr[EXYNOS_DRM_PLANAR_Y] + hsize *
vsize;
> > >> + }
> > >> +
> > >> + for_each_ipp_planar(i)
> > >> + rot_write(addr[i], ROT_SRC_BUF_ADDR(i));
> > >> + break;
> > >> + case IPP_BUF_DEQUEUE:
> > >> + for_each_ipp_planar(i)
> > >> + rot_write(0x0, ROT_SRC_BUF_ADDR(i));
> > >> + break;
> > >> + default:
> > >> + /* Nothing to do */
> > >> + break;
> > >> + }
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int rotator_dst_set_transf(struct device *dev,
> > >> + enum drm_exynos_degree degree,
> > >> + enum drm_exynos_flip flip)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + u32 val;
> > >> +
> > >> + /* Set transform configuration */
> > >> + val = rot_read(ROT_CONTROL);
> > >> + val &= ~ROT_CONTROL_FLIP_MASK;
> > >> +
> > >> + switch (flip) {
> > >> + case EXYNOS_DRM_FLIP_VERTICAL:
> > >> + val |= ROT_CONTROL_FLIP_VERTICAL;
> > >> + break;
> > >> + case EXYNOS_DRM_FLIP_HORIZONTAL:
> > >> + val |= ROT_CONTROL_FLIP_HORIZONTAL;
> > >> + break;
> > >> + default:
> > >> + /* Flip None */
> > >> + break;
> > >> + }
> > >> +
> > >> + val &= ~ROT_CONTROL_ROT_MASK;
> > >> +
> > >> + switch (degree) {
> > >> + case EXYNOS_DRM_DEGREE_90:
> > >> + val |= ROT_CONTROL_ROT_90;
> > >> + break;
> > >> + case EXYNOS_DRM_DEGREE_180:
> > >> + val |= ROT_CONTROL_ROT_180;
> > >> + break;
> > >> + case EXYNOS_DRM_DEGREE_270:
> > >> + val |= ROT_CONTROL_ROT_270;
> > >> + break;
> > >> + default:
> > >> + /* Rotation 0 Degree */
> > >> + break;
> > >> + }
> > >> +
> > >> + rot_write(val, ROT_CONTROL);
> > >> +
> > >> + /* Check degree for setting buffer size swap */
> > >> + if ((degree == EXYNOS_DRM_DEGREE_90) ||
> > >> + (degree == EXYNOS_DRM_DEGREE_270))
> > >> + return 1;
> > >
> > > Correct return type. This function should return 0 or negative.
> >
> > - no ~ this return type is boolean true or false.
> > but we need to error handling so, we use integer as you know
> > we reviewed this routine at our local git from our team(you and me).
> >
> > >
> > >> + else
> > >> + return 0;
> > >
> > > Ditto.
> >
> > - ditto.
> >
> > >
> > >> +}
> > >> +
> > >> +static int rotator_dst_set_size(struct device *dev, int swap,
> > >> + struct drm_exynos_pos *pos,
> > >> + struct drm_exynos_sz *sz)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + u32 val, fmt, hsize, vsize;
> > >> +
> > >> + /* Get format */
> > >> + fmt = rotator_reg_get_format(rot);
> > >
> > > Check if fmt is valid or not.
> >
> > - added rotator_check_fmt()
> >
> > >
> > >> +
> > >> + /* Align buffer size */
> > >> + hsize = sz->hsize;
> > >> + vsize = sz->vsize;
> > >> + rotator_align_size(rot, fmt, &hsize, &vsize);
> > >> +
> > >> + /* Set buffer size configuration */
> > >> + val = ROT_SET_BUF_SIZE_H(vsize) | ROT_SET_BUF_SIZE_W(hsize);
> > >> + rot_write(val, ROT_DST_BUF_SIZE);
> > >> +
> > >> + /* Set crop image position configuration */
> > >> + val = ROT_CROP_POS_Y(pos->y) | ROT_CROP_POS_X(pos->x);
> > >> + rot_write(val, ROT_DST_CROP_POS);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int rotator_dst_set_addr(struct device *dev,
> > >> + struct drm_exynos_ipp_buf_info *buf_info,
> > >> + u32 buf_id, enum drm_exynos_ipp_buf_type buf_type)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + dma_addr_t addr[EXYNOS_DRM_PLANAR_MAX];
> > >> + u32 val, fmt, hsize, vsize;
> > >> + int i;
> > >> +
> > >> + /* Set current buf_id */
> > >> + rot->cur_buf_id[EXYNOS_DRM_OPS_DST] = buf_id;
> > >> +
> > >> + switch (buf_type) {
> > >> + case IPP_BUF_ENQUEUE:
> > >> + /* Set address configuration */
> > >> + for_each_ipp_planar(i)
> > >> + addr[i] = buf_info->base[i];
> > >> +
> > >> + /* Get format */
> > >> + fmt = rotator_reg_get_format(rot);
> > >
> > > Check if fmt is valid or not.
> >
> > - done.
> >
> > >
> > >> +
> > >> + /* Re-set cb planar for NV12 format */
> > >> + if ((fmt == ROT_CONTROL_FMT_YCBCR420_2P) &&
> > >> + (addr[EXYNOS_DRM_PLANAR_CB]
==
> > > 0x00)) {
> > >> + /* Get buf size */
> > >> + val = rot_read(ROT_DST_BUF_SIZE);
> > >> +
> > >> + hsize = ROT_GET_BUF_SIZE_W(val);
> > >> + vsize = ROT_GET_BUF_SIZE_H(val);
> > >> +
> > >> + /* Set cb planar */
> > >> + addr[EXYNOS_DRM_PLANAR_CB] =
> > >> + addr[EXYNOS_DRM_PLANAR_Y] + hsize *
vsize;
> > >> + }
> > >> +
> > >> + for_each_ipp_planar(i)
> > >> + rot_write(addr[i], ROT_DST_BUF_ADDR(i));
> > >> + break;
> > >> + case IPP_BUF_DEQUEUE:
> > >> + for_each_ipp_planar(i)
> > >> + rot_write(0x0, ROT_DST_BUF_ADDR(i));
> > >> + break;
> > >> + default:
> > >> + /* Nothing to do */
> > >> + break;
> > >> + }
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static struct exynos_drm_ipp_ops rot_src_ops = {
> > >> + .set_fmt = rotator_src_set_fmt,
> > >> + .set_size = rotator_src_set_size,
> > >> + .set_addr = rotator_src_set_addr,
> > >> +};
> > >> +
> > >> +static struct exynos_drm_ipp_ops rot_dst_ops = {
> > >> + .set_transf = rotator_dst_set_transf,
> > >> + .set_size = rotator_dst_set_size,
> > >> + .set_addr = rotator_dst_set_addr,
> > >> +};
> > >> +
> > >> +static int rotator_init_prop_list(struct exynos_drm_ippdrv *ippdrv)
> > >> +{
> > >> + struct drm_exynos_ipp_prop_list *prop_list;
> > >> +
> > >> + DRM_DEBUG_KMS("%s\n", __func__);
> > >> +
> > >> + prop_list = kzalloc(sizeof(*prop_list), GFP_KERNEL);
> > >> + if (!prop_list) {
> > >> + DRM_ERROR("failed to alloc property list.\n");
> > >> + return -ENOMEM;
> > >> + }
> > >> +
> > >> + /*ToDo fix support function list*/
> > >> +
> > >> + prop_list->version = 1;
> > >> + prop_list->flip = (1 << EXYNOS_DRM_FLIP_VERTICAL) |
> > >> + (1 << EXYNOS_DRM_FLIP_HORIZONTAL);
> > >> + prop_list->degree = (1 << EXYNOS_DRM_DEGREE_0) |
> > >> + (1 << EXYNOS_DRM_DEGREE_90) |
> > >> + (1 << EXYNOS_DRM_DEGREE_180) |
> > >> + (1 << EXYNOS_DRM_DEGREE_270);
> > >> + prop_list->csc = 0;
> > >> + prop_list->crop = 0;
> > >> + prop_list->scale = 0;
> > >> +
> > >> + ippdrv->prop_list = prop_list;
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int rotator_ippdrv_check_property(struct device *dev,
> > >> + struct drm_exynos_ipp_property *property)
> > >> +{
> > >> + struct drm_exynos_ipp_config *src_config =
> > >> +
> > > &property->config[EXYNOS_DRM_OPS_SRC];
> > >> + struct drm_exynos_ipp_config *dst_config =
> > >> +
> > > &property->config[EXYNOS_DRM_OPS_DST];
> > >> + struct drm_exynos_pos *src_pos = &src_config->pos;
> > >> + struct drm_exynos_pos *dst_pos = &dst_config->pos;
> > >> + struct drm_exynos_sz *src_sz = &src_config->sz;
> > >> + struct drm_exynos_sz *dst_sz = &dst_config->sz;
> > >> + bool swap = false;
> > >> +
> > >> + /* Check format configuration */
> > >> + if (src_config->fmt != dst_config->fmt) {
> > >> + DRM_DEBUG_KMS("%s:not support csc feature\n",
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + switch (src_config->fmt) {
> > >> + case DRM_FORMAT_XRGB8888:
> > >> + case DRM_FORMAT_NV12:
> > >> + /* No problem */
> > >> + break;
> > >> + default:
> > >> + DRM_DEBUG_KMS("%s:not support format\n", __func__);
> > >> + return -EINVAL;
> > >> + }
> > >
> > > Use macro instead of switch-case. this just checks only format type.
> >
> > - I don't thing so, If we make macro about this.
> > then we got some confusion about this macro at next change.
> > this case switch-case is better.
> > Do you prefer this ? please one more comment.
> >
> > #define drm_check_fmt(fmt) if (fmt == DRM_FORMAT_XRGB8888 || fmt ==
> > DRM_FORMAT_NV12) \
> > return true;
>
> #define drm_check_fmt(fmt) ((fmt & (DRM_FORMAT_XRGB8888 |
> DRM_FORMAT_NV12)) ? true : false)
>
> if (drm_check_fmt(src_config->fmt))
> Something;
> else
> Something;
Again,
#define DRM_FORMAT_MASK (DRM_FORMAT_XRGB888 |
DRM_FORMAT_NV12)
#define drm_check_fmt(fmt) (((fmt & DRM_FORMAT_MASK) &
(DRM_FORMAT_XRGB8888 | \
DRM_FORMAT_NV12)) ? true : false)
if (drm_check_fmt(src_config->fmt))
Something;
else
Something;
>
> >
> > >
> > >> +
> > >> + /* Check transform configuration */
> > >> + if (src_config->degree != EXYNOS_DRM_DEGREE_0) {
> > >> + DRM_DEBUG_KMS("%s:not support source-side
rotation\n",
> > >> +
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + switch (dst_config->degree) {
> > >> + case EXYNOS_DRM_DEGREE_90:
> > >> + case EXYNOS_DRM_DEGREE_270:
> > >> + swap = true;
> > >> + case EXYNOS_DRM_DEGREE_0:
> > >> + case EXYNOS_DRM_DEGREE_180:
> > >> + /* No problem */
> > >> + break;
> > >> + default:
> > >> + DRM_DEBUG_KMS("%s:invalid degree\n", __func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + if (src_config->flip != EXYNOS_DRM_FLIP_NONE) {
> > >> + DRM_DEBUG_KMS("%s:not support source-side flip\n",
> > > __func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + switch (dst_config->flip) {
> > >> + case EXYNOS_DRM_FLIP_NONE:
> > >> + case EXYNOS_DRM_FLIP_VERTICAL:
> > >> + case EXYNOS_DRM_FLIP_HORIZONTAL:
> > >> + /* No problem */
> > >> + break;
> > >> + default:
> > >> + DRM_DEBUG_KMS("%s:invalid flip\n", __func__);
> > >> + return -EINVAL;
> > >> + }
> > >
> > > Use macro instead of switch-case. this just checks only flip type.
> >
> > - ditto. please one more comment.
> > in my opinion: I prefer enumeration use switch-case.
>
> What does each case do? Just check? If so, use macro as I mentioned. We
> can't accept this codes.
>
> >
> > >
> > >> +
> > >> + /* Check size configuration */
> > >> + if ((src_pos->x + src_pos->w > src_sz->hsize) ||
> > >> + (src_pos->y + src_pos->h > src_sz->vsize)) {
> > >> + DRM_DEBUG_KMS("%s:out of source buffer bound\n",
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + if (swap) {
> > >> + if ((dst_pos->x + dst_pos->h > dst_sz->vsize) ||
> > >> + (dst_pos->y + dst_pos->w > dst_sz->hsize)) {
> > >> + DRM_DEBUG_KMS("%s:out of destination buffer
> > > bound\n",
> > >> +
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + if ((src_pos->w != dst_pos->h) || (src_pos->h !=
> > > dst_pos->w))
> > >> {
> > >> + DRM_DEBUG_KMS("%s:not support scale
feature\n",
> > >> +
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> + } else {
> > >> + if ((dst_pos->x + dst_pos->w > dst_sz->hsize) ||
> > >> + (dst_pos->y + dst_pos->h > dst_sz->vsize)) {
> > >> + DRM_DEBUG_KMS("%s:out of destination buffer
> > > bound\n",
> > >> +
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + if ((src_pos->w != dst_pos->w) || (src_pos->h !=
> > > dst_pos->h))
> > >> {
> > >> + DRM_DEBUG_KMS("%s:not support scale
feature\n",
> > >> +
__func__);
> > >> + return -EINVAL;
> > >> + }
> > >> + }
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int rotator_ippdrv_start(struct device *dev, enum
> > >> drm_exynos_ipp_cmd cmd)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + u32 val;
> > >> +
> > >> + if (rot->suspended) {
> > >> + DRM_ERROR("suspended state\n");
> > >> + return -EPERM;
> > >> + }
> > >> +
> > >> + if (cmd != IPP_CMD_M2M) {
> > >> + DRM_ERROR("not support cmd: %d\n", cmd);
> > >> + return -EINVAL;
> > >> + }
> > >> +
> > >> + /* Set interrupt enable */
> > >> + rotator_reg_set_irq(rot, true);
> > >> +
> > >> + val = rot_read(ROT_CONTROL);
> > >> + val |= ROT_CONTROL_START;
> > >> +
> > >> + rot_write(val, ROT_CONTROL);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +static int __devinit rotator_probe(struct platform_device *pdev)
> > >> +{
> > >> + struct device *dev = &pdev->dev;
> > >> + struct rot_context *rot;
> > >> + struct resource *res;
> > >> + struct exynos_drm_ippdrv *ippdrv;
> > >> + int ret;
> > >> +
> > >> + rot = kzalloc(sizeof(*rot), GFP_KERNEL);
> > >> + if (!rot) {
> > >> + dev_err(dev, "failed to allocate rot\n");
> > >> + return -ENOMEM;
> > >> + }
> > >> +
> > >> + rot->limit_tbl = (struct rot_limit_table *)
> > >> +
platform_get_device_id(pdev)->driver_data;
> > >> +
> > >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > >> + if (!res) {
> > >> + dev_err(dev, "failed to find registers\n");
> > >> + ret = -ENOENT;
> > >> + goto err_get_resource;
> > >> + }
> > >> +
> > >> + rot->regs_res = request_mem_region(res->start,
resource_size(res),
> > >> +
> > > dev_name(dev));
> > >> + if (!rot->regs_res) {
> > >> + dev_err(dev, "failed to claim register region\n");
> > >> + ret = -ENOENT;
> > >> + goto err_get_resource;
> > >> + }
> > >> +
> > >> + rot->regs = ioremap(res->start, resource_size(res));
> > >> + if (!rot->regs) {
> > >> + dev_err(dev, "failed to map register\n");
> > >> + ret = -ENXIO;
> > >> + goto err_ioremap;
> > >> + }
> > >> +
> > >> + rot->irq = platform_get_irq(pdev, 0);
> > >> + if (rot->irq < 0) {
> > >> + dev_err(dev, "failed to get irq\n");
> > >> + ret = rot->irq;
> > >> + goto err_get_irq;
> > >> + }
> > >> +
> > >> + ret = request_threaded_irq(rot->irq, NULL,
rotator_irq_handler,
> > >> + IRQF_ONESHOT, "drm_rotator",
rot);
> > >> + if (ret < 0) {
> > >> + dev_err(dev, "failed to request irq\n");
> > >> + goto err_get_irq;
> > >> + }
> > >> +
> > >> + rot->clock = clk_get(dev, "rotator");
> > >> + if (IS_ERR_OR_NULL(rot->clock)) {
> > >> + dev_err(dev, "failed to get clock\n");
> > >> + ret = PTR_ERR(rot->clock);
> > >> + goto err_clk_get;
> > >> + }
> > >> +
> > >> + pm_runtime_enable(dev);
> > >> +
> > >> + ippdrv = &rot->ippdrv;
> > >> + ippdrv->dev = dev;
> > >> + ippdrv->ops[EXYNOS_DRM_OPS_SRC] = &rot_src_ops;
> > >> + ippdrv->ops[EXYNOS_DRM_OPS_DST] = &rot_dst_ops;
> > >> + ippdrv->check_property = rotator_ippdrv_check_property;
> > >> + ippdrv->start = rotator_ippdrv_start;
> > >> + ret = rotator_init_prop_list(ippdrv);
> > >> + if (ret < 0) {
> > >> + dev_err(dev, "failed to init property list.\n");
> > >> + goto err_ippdrv_register;
> > >> + }
> > >> +
> > >> + DRM_DEBUG_KMS("%s:ippdrv[0x%x]\n", __func__, (int)ippdrv);
> > >> +
> > >> + platform_set_drvdata(pdev, rot);
> > >> +
> > >> + ret = exynos_drm_ippdrv_register(ippdrv);
> > >> + if (ret < 0) {
> > >> + dev_err(dev, "failed to register drm rotator
device\n");
> > >> + kfree(ippdrv->prop_list);
> > >> + goto err_ippdrv_register;
> > >> + }
> > >> +
> > >> + dev_info(dev, "The exynos rotator is probed
successfully\n");
> > >> +
> > >> + return 0;
> > >> +
> > >> +err_ippdrv_register:
> > >> + pm_runtime_disable(dev);
> > >> + clk_put(rot->clock);
> > >> +err_clk_get:
> > >> + free_irq(rot->irq, rot);
> > >> +err_get_irq:
> > >> + iounmap(rot->regs);
> > >> +err_ioremap:
> > >> + release_resource(rot->regs_res);
> > >> + kfree(rot->regs_res);
> > >> +err_get_resource:
> > >> + kfree(rot);
> > >> + return ret;
> > >> +}
> > >> +
> > >> +static int __devexit rotator_remove(struct platform_device *pdev)
> > >> +{
> > >> + struct device *dev = &pdev->dev;
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> + struct exynos_drm_ippdrv *ippdrv = &rot->ippdrv;
> > >> +
> > >> + kfree(ippdrv->prop_list);
> > >> + exynos_drm_ippdrv_unregister(ippdrv);
> > >> +
> > >> + pm_runtime_disable(dev);
> > >> + clk_put(rot->clock);
> > >> +
> > >> + free_irq(rot->irq, rot);
> > >> +
> > >> + iounmap(rot->regs);
> > >> +
> > >> + release_resource(rot->regs_res);
> > >> + kfree(rot->regs_res);
> > >> +
> > >> + kfree(rot);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +struct rot_limit_table rot_limit_tbl = {
> > >> + .ycbcr420_2p = {
> > >> + .min_w = 32,
> > >> + .min_h = 32,
> > >> + .max_w = SZ_32K,
> > >> + .max_h = SZ_32K,
> > >> + .align = 3,
> > >> + },
> > >> + .rgb888 = {
> > >> + .min_w = 8,
> > >> + .min_h = 8,
> > >> + .max_w = SZ_8K,
> > >> + .max_h = SZ_8K,
> > >> + .align = 2,
> > >> + },
> > >> +};
> > >> +
> > >> +struct platform_device_id rotator_driver_ids[] = {
> > >> + {
> > >> + .name = "exynos-rot",
> > >> + .driver_data = (unsigned long)&rot_limit_tbl,
> > >> + },
> > >> + {},
> > >> +};
> > >> +
> > >> +static int rotator_clk_crtl(struct rot_context *rot, bool enable)
> > >> +{
> > >> + DRM_DEBUG_KMS("%s\n", __func__);
> > >> +
> > >> + if (enable) {
> > >> + clk_enable(rot->clock);
> > >> + rot->suspended = false;
> > >> + } else {
> > >> + clk_disable(rot->clock);
> > >> + rot->suspended = true;
> > >> + }
> > >> +
> > >> + return 0;
> > >> +}
> > >> +
> > >> +
> > >> +#ifdef CONFIG_PM_SLEEP
> > >> +static int rotator_suspend(struct device *dev)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> +
> > >> + /* ToDo */
> > >> +
> > >> + DRM_DEBUG_KMS("%s\n", __func__);
> > >> +
> > >> + if (pm_runtime_suspended(dev))
> > >> + return 0;
> > >> +
> > >> + return rotator_clk_crtl(rot, false);
> > >> +}
> > >> +
> > >> +static int rotator_resume(struct device *dev)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> +
> > >> + /* ToDo */
> > >> +
> > >> + DRM_DEBUG_KMS("%s\n", __func__);
> > >> +
> > >> + if (!pm_runtime_suspended(dev))
> > >> + return rotator_clk_crtl(rot, true);
> > >> +
> > >> + return 0;
> > >> +}
> > >> +#endif
> > >> +
> > >> +#ifdef CONFIG_PM_RUNTIME
> > >> +static int rotator_runtime_suspend(struct device *dev)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> +
> > >> + /* ToDo */
> > >> +
> > >> + DRM_DEBUG_KMS("%s\n", __func__);
> > >> +
> > >> + return rotator_clk_crtl(rot, false);
> > >> +}
> > >> +
> > >> +static int rotator_runtime_resume(struct device *dev)
> > >> +{
> > >> + struct rot_context *rot = dev_get_drvdata(dev);
> > >> +
> > >> + /* ToDo */
> > >> +
> > >> + DRM_DEBUG_KMS("%s\n", __func__);
> > >> +
> > >> + return rotator_clk_crtl(rot, true);
> > >> +}
> > >> +#endif
> > >> +
> > >> +static const struct dev_pm_ops rotator_pm_ops = {
> > >> + SET_SYSTEM_SLEEP_PM_OPS(rotator_suspend, rotator_resume)
> > >> + SET_RUNTIME_PM_OPS(rotator_runtime_suspend,
rotator_runtime_resume,
> > >> +
> > > NULL)
> > >> +};
> > >> +
> > >> +struct platform_driver rotator_driver = {
> > >> + .probe = rotator_probe,
> > >> + .remove = __devexit_p(rotator_remove),
> > >> + .id_table = rotator_driver_ids,
> > >> + .driver = {
> > >> + .name = "exynos-rot",
> > >> + .owner = THIS_MODULE,
> > >> + .pm = &rotator_pm_ops,
> > >> + },
> > >> +};
> > >> diff --git a/drivers/gpu/drm/exynos/exynos_drm_rotator.h
> > >> b/drivers/gpu/drm/exynos/exynos_drm_rotator.h
> > >> new file mode 100644
> > >> index 0000000..fe929c9
> > >> --- /dev/null
> > >> +++ b/drivers/gpu/drm/exynos/exynos_drm_rotator.h
> > >> @@ -0,0 +1,13 @@
> > >> +/*
> > >> + * Copyright (C) 2012 Samsung Electronics Co.Ltd
> > >> + * Authors: YoungJun Cho <yj44.cho at samsung.com>
> > >> + *
> > >> + * This program is free software; you can redistribute it and/or
> > modify
> > >> + * it under the terms of the GNU General Public License version 2 as
> > >> + * published by the Free Software Foundationr
> > >> + */
> > >> +
> > >> +#ifndef _EXYNOS_DRM_ROTATOR_H_
> > >> +#define _EXYNOS_DRM_ROTATOR_H_
> > >> +
> > >> +#endif
> > >> diff --git a/drivers/gpu/drm/exynos/regs-rotator.h
> > >> b/drivers/gpu/drm/exynos/regs-rotator.h
> > >> new file mode 100644
> > >> index 0000000..a09ac6e
> > >> --- /dev/null
> > >> +++ b/drivers/gpu/drm/exynos/regs-rotator.h
> > >> @@ -0,0 +1,73 @@
> > >> +/* drivers/gpu/drm/exynos/regs-rotator.h
> > >> + *
> > >> + * Copyright (c) 2012 Samsung Electronics Co., Ltd.
> > >> + * http://www.samsung.com/
> > >> + *
> > >> + * Register definition file for Samsung Rotator Interface (Rotator)
> > >> driver
> > >> + *
> > >> + * This program is free software; you can redistribute it and/or
> > modify
> > >> + * it under the terms of the GNU General Public License version 2 as
> > >> + * published by the Free Software Foundation.
> > >> +*/
> > >> +
> > >> +#ifndef EXYNOS_REGS_ROTATOR_H
> > >> +#define EXYNOS_REGS_ROTATOR_H
> > >> +
> > >> +/* Configuration */
> > >> +#define ROT_CONFIG 0x00
> > >> +#define ROT_CONFIG_IRQ (3 << 8)
> > >> +
> > >> +/* Image Control */
> > >> +#define ROT_CONTROL 0x10
> > >> +#define ROT_CONTROL_PATTERN_WRITE (1 << 16)
> > >> +#define ROT_CONTROL_FMT_YCBCR420_2P (1 << 8)
> > >> +#define ROT_CONTROL_FMT_RGB888 (6 << 8)
> > >> +#define ROT_CONTROL_FMT_MASK (7 << 8)
> > >> +#define ROT_CONTROL_FLIP_VERTICAL (2 << 6)
> > >> +#define ROT_CONTROL_FLIP_HORIZONTAL (3 << 6)
> > >> +#define ROT_CONTROL_FLIP_MASK (3 << 6)
> > >> +#define ROT_CONTROL_ROT_90 (1 << 4)
> > >> +#define ROT_CONTROL_ROT_180 (2 << 4)
> > >> +#define ROT_CONTROL_ROT_270 (3 << 4)
> > >> +#define ROT_CONTROL_ROT_MASK (3 << 4)
> > >> +#define ROT_CONTROL_START (1 << 0)
> > >> +
> > >> +/* Status */
> > >> +#define ROT_STATUS 0x20
> > >> +#define ROT_STATUS_IRQ_PENDING(x) (1 << (x))
> > >> +#define ROT_STATUS_IRQ(x) (((x) >> 8) & 0x3)
> > >> +#define ROT_STATUS_IRQ_VAL_COMPLETE 1
> > >> +#define ROT_STATUS_IRQ_VAL_ILLEGAL 2
> > >> +
> > >> +/* Buffer Address */
> > >> +#define ROT_SRC_BUF_ADDR(n) (0x30 + ((n) << 2))
> > >> +#define ROT_DST_BUF_ADDR(n) (0x50 + ((n) << 2))
> > >> +
> > >> +/* Buffer Size */
> > >> +#define ROT_SRC_BUF_SIZE 0x3c
> > >> +#define ROT_DST_BUF_SIZE 0x5c
> > >> +#define ROT_SET_BUF_SIZE_H(x) ((x) << 16)
> > >> +#define ROT_SET_BUF_SIZE_W(x) ((x) << 0)
> > >> +#define ROT_GET_BUF_SIZE_H(x) ((x) >> 16)
> > >> +#define ROT_GET_BUF_SIZE_W(x) ((x) & 0xffff)
> > >> +
> > >> +/* Crop Position */
> > >> +#define ROT_SRC_CROP_POS 0x40
> > >> +#define ROT_DST_CROP_POS 0x60
> > >> +#define ROT_CROP_POS_Y(x) ((x) << 16)
> > >> +#define ROT_CROP_POS_X(x) ((x) << 0)
> > >> +
> > >> +/* Source Crop Size */
> > >> +#define ROT_SRC_CROP_SIZE 0x44
> > >> +#define ROT_SRC_CROP_SIZE_H(x) ((x) << 16)
> > >> +#define ROT_SRC_CROP_SIZE_W(x) ((x) << 0)
> > >> +
> > >> +/* Round to nearest aligned value */
> > >> +#define ROT_ALIGN(x, align, mask) (((x) + (1 << ((align) -
1))) &
> > >> (mask))
> > >> +/* Minimum limit value */
> > >> +#define ROT_MIN(min, mask) (((min) + ~(mask)) & (mask))
> > >> +/* Maximum limit value */
> > >> +#define ROT_MAX(max, mask) ((max) & (mask))
> > >> +
> > >> +#endif /* EXYNOS_REGS_ROTATOR_H */
> > >> +
> > >> --
> > >> 1.7.0.4
> > >
> > >
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
