Remove the copy of i2f() in r600_blit_kms.c
We rename the function to something longer now that it is a global
symbol. This reduces the likelyhood of unintended clashes later.
This might be a candidate for inclusion inside general drm infrastructure.
However, at the moment only the radeon driver uses it.
Signed-off-by: Steven Fuerst <svfuerst at gmail.com>
---
drivers/gpu/drm/radeon/r600_blit.c | 66 ++++++++++++++--------------
drivers/gpu/drm/radeon/r600_blit_kms.c | 45 +++----------------
drivers/gpu/drm/radeon/r600_blit_shaders.h | 1 +
3 files changed, 40 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/radeon/r600_blit.c
b/drivers/gpu/drm/radeon/r600_blit.c
index f0ce441..7c748ba 100644
--- a/drivers/gpu/drm/radeon/r600_blit.c
+++ b/drivers/gpu/drm/radeon/r600_blit.c
@@ -501,7 +501,7 @@ set_default_state(drm_radeon_private_t *dev_priv)
* This routine depends on the mod(32) behaviour of the rotate instructions
* on x86.
*/
-static uint32_t i2f(uint32_t x)
+uint32_t int2float(uint32_t x)
{
uint32_t msb, exponent, fraction;
@@ -640,20 +640,20 @@ r600_blit_copy(struct drm_device *dev,
vb = r600_nomm_get_vb_ptr(dev);
}
- vb[0] = i2f(dst_x);
+ vb[0] = int2float(dst_x);
vb[1] = 0;
- vb[2] = i2f(src_x);
+ vb[2] = int2float(src_x);
vb[3] = 0;
- vb[4] = i2f(dst_x);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x);
- vb[7] = i2f(h);
+ vb[4] = int2float(dst_x);
+ vb[5] = int2float(h);
+ vb[6] = int2float(src_x);
+ vb[7] = int2float(h);
- vb[8] = i2f(dst_x + cur_size);
- vb[9] = i2f(h);
- vb[10] = i2f(src_x + cur_size);
- vb[11] = i2f(h);
+ vb[8] = int2float(dst_x + cur_size);
+ vb[9] = int2float(h);
+ vb[10] = int2float(src_x + cur_size);
+ vb[11] = int2float(h);
/* src */
set_tex_resource(dev_priv, FMT_8,
@@ -729,20 +729,20 @@ r600_blit_copy(struct drm_device *dev,
vb = r600_nomm_get_vb_ptr(dev);
}
- vb[0] = i2f(dst_x / 4);
+ vb[0] = int2float(dst_x / 4);
vb[1] = 0;
- vb[2] = i2f(src_x / 4);
+ vb[2] = int2float(src_x / 4);
vb[3] = 0;
- vb[4] = i2f(dst_x / 4);
- vb[5] = i2f(h);
- vb[6] = i2f(src_x / 4);
- vb[7] = i2f(h);
+ vb[4] = int2float(dst_x / 4);
+ vb[5] = int2float(h);
+ vb[6] = int2float(src_x / 4);
+ vb[7] = int2float(h);
- vb[8] = i2f((dst_x + cur_size) / 4);
- vb[9] = i2f(h);
- vb[10] = i2f((src_x + cur_size) / 4);
- vb[11] = i2f(h);
+ vb[8] = int2float((dst_x + cur_size) / 4);
+ vb[9] = int2float(h);
+ vb[10] = int2float((src_x + cur_size) / 4);
+ vb[11] = int2float(h);
/* src */
set_tex_resource(dev_priv, FMT_8_8_8_8,
@@ -812,20 +812,20 @@ r600_blit_swap(struct drm_device *dev,
dx2 = dx + w;
dy2 = dy + h;
- vb[0] = i2f(dx);
- vb[1] = i2f(dy);
- vb[2] = i2f(sx);
- vb[3] = i2f(sy);
+ vb[0] = int2float(dx);
+ vb[1] = int2float(dy);
+ vb[2] = int2float(sx);
+ vb[3] = int2float(sy);
- vb[4] = i2f(dx);
- vb[5] = i2f(dy2);
- vb[6] = i2f(sx);
- vb[7] = i2f(sy2);
+ vb[4] = int2float(dx);
+ vb[5] = int2float(dy2);
+ vb[6] = int2float(sx);
+ vb[7] = int2float(sy2);
- vb[8] = i2f(dx2);
- vb[9] = i2f(dy2);
- vb[10] = i2f(sx2);
- vb[11] = i2f(sy2);
+ vb[8] = int2float(dx2);
+ vb[9] = int2float(dy2);
+ vb[10] = int2float(sx2);
+ vb[11] = int2float(sy2);
switch(cpp) {
case 4:
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c
b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 8307558..1c7ed3a 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -455,39 +455,6 @@ set_default_state(struct radeon_device *rdev)
radeon_ring_write(ring, sq_stack_resource_mgmt_2);
}
-/* 23 bits of float fractional data */
-#define I2F_FRAC_BITS 23
-#define I2F_MASK ((1 << I2F_FRAC_BITS) - 1)
-
-/*
- * Converts unsigned integer into 32-bit IEEE floating point representation.
- * Will be exact from 0 to 2^24. Above that, we round towards zero
- * as the fractional bits will not fit in a float. (It would be better to
- * round towards even as the fpu does, but that is slower.)
- * This routine depends on the mod(32) behaviour of the rotate instructions
- * on x86.
- */
-static uint32_t i2f(uint32_t x)
-{
- uint32_t msb, exponent, fraction;
-
- /* Zero is special */
- if (!x) return 0;
-
- /* Get location of the most significant bit */
- msb = __fls(x);
-
- /*
- * Use a rotate instead of a shift because that works both leftwards
- * and rightwards due to the mod(32) beahviour. This means we don't
- * need to check to see if we are above 2^24 or not.
- */
- fraction = ror32(x, msb - I2F_FRAC_BITS) & I2F_MASK;
- exponent = (127 + msb) << I2F_FRAC_BITS;
-
- return fraction + exponent;
-}
-
int r600_blit_init(struct radeon_device *rdev)
{
u32 obj_size;
@@ -759,14 +726,14 @@ void r600_kms_blit_copy(struct radeon_device *rdev,
vb_cpu_addr[3] = 0;
vb_cpu_addr[4] = 0;
- vb_cpu_addr[5] = i2f(h);
+ vb_cpu_addr[5] = int2float(h);
vb_cpu_addr[6] = 0;
- vb_cpu_addr[7] = i2f(h);
+ vb_cpu_addr[7] = int2float(h);
- vb_cpu_addr[8] = i2f(w);
- vb_cpu_addr[9] = i2f(h);
- vb_cpu_addr[10] = i2f(w);
- vb_cpu_addr[11] = i2f(h);
+ vb_cpu_addr[8] = int2float(w);
+ vb_cpu_addr[9] = int2float(h);
+ vb_cpu_addr[10] = int2float(w);
+ vb_cpu_addr[11] = int2float(h);
rdev->r600_blit.primitives.set_tex_resource(rdev, FMT_8_8_8_8,
w, h, w,
src_gpu_addr, size_in_bytes);
diff --git a/drivers/gpu/drm/radeon/r600_blit_shaders.h
b/drivers/gpu/drm/radeon/r600_blit_shaders.h
index f437d36..e17c2cb 100644
--- a/drivers/gpu/drm/radeon/r600_blit_shaders.h
+++ b/drivers/gpu/drm/radeon/r600_blit_shaders.h
@@ -35,4 +35,5 @@ extern const u32 r6xx_default_state[];
extern const u32 r6xx_ps_size, r6xx_vs_size;
extern const u32 r6xx_default_size, r7xx_default_size;
+uint32_t int2float(uint32_t x);
#endif
--
1.7.10.4
