Move away from generic pr prints to GT aware gt_* versions,
which tag each message with device and the tile it came from.

Assisted-by: GitHub-Copilot:claude-opus-5
Signed-off-by: Krzysztof Karas <[email protected]>
---
v5:
 * No changes since v4;

 drivers/gpu/drm/i915/gt/selftest_rc6.c |  32 ++++---
 drivers/gpu/drm/i915/gt/selftest_rps.c | 126 ++++++++++++++++---------
 2 files changed, 103 insertions(+), 55 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/selftest_rc6.c 
b/drivers/gpu/drm/i915/gt/selftest_rc6.c
index 68fb1830d411..a88b39733364 100644
--- a/drivers/gpu/drm/i915/gt/selftest_rc6.c
+++ b/drivers/gpu/drm/i915/gt/selftest_rc6.c
@@ -6,6 +6,7 @@
 #include "intel_context.h"
 #include "intel_engine_pm.h"
 #include "intel_gpu_commands.h"
+#include "intel_gt_print.h"
 #include "intel_gt_requests.h"
 #include "intel_ring.h"
 #include "intel_rps.h"
@@ -80,7 +81,8 @@ int live_rc6_manual(void *arg)
        res[1] = rc6_residency(rc6);
        rc0_freq = intel_rps_read_actual_frequency_fw(rps);
        if ((res[1] - res[0]) >> 10) {
-               pr_err("RC6 residency increased by %lldus while disabled for 
1000ms!\n",
+               gt_err(gt,
+                      "RC6 residency increased by %lldus while disabled for 
1000ms!\n",
                       (res[1] - res[0]) >> 10);
                err = -EINVAL;
                goto out_unlock;
@@ -92,10 +94,12 @@ int live_rc6_manual(void *arg)
 
                if (!rc0_power) {
                        if (rc0_freq)
-                               pr_err("No power measured while in RC0! GPU 
Freq: %uMHz in RC0\n",
+                               gt_err(gt,
+                                      "No power measured while in RC0! GPU 
Freq: %uMHz in RC0\n",
                                       rc0_freq);
                        else
-                               pr_err("No power and freq measured while in 
RC0\n");
+                               gt_err(gt,
+                                      "No power and freq measured while in 
RC0\n");
                        err = -EINVAL;
                        goto out_unlock;
                }
@@ -114,7 +118,8 @@ int live_rc6_manual(void *arg)
        dt = ktime_sub(ktime_get(), dt);
        res[1] = rc6_residency(rc6);
        if (res[1] == res[0]) {
-               pr_err("Did not enter RC6! RC6_STATE=%08x, RC6_CONTROL=%08x, 
residency=%lld\n",
+               gt_err(gt,
+                      "Did not enter RC6! RC6_STATE=%08x, RC6_CONTROL=%08x, 
residency=%lld\n",
                       intel_uncore_read_fw(gt->uncore, GEN6_RC_STATE),
                       intel_uncore_read_fw(gt->uncore, GEN6_RC_CONTROL),
                       res[0]);
@@ -124,21 +129,25 @@ int live_rc6_manual(void *arg)
        if (has_power) {
                rc6_power = div64_u64(NSEC_PER_SEC * rc6_sample_energy[1],
                                      ktime_to_ns(dt));
-               pr_info("GPU consumed %lluuW in RC0 and %lluuW in RC6\n",
+               gt_info(gt,
+                       "GPU consumed %lluuW in RC0 and %lluuW in RC6\n",
                        rc0_power, rc6_power);
 
                if (2 * rc6_power > rc0_power) {
-                       pr_err("GPU leaked energy while in RC6!\n"
+                       gt_err(gt,
+                              "GPU leaked energy while in RC6!\n"
                               "GPU Freq: %uMHz in RC6 and %uMHz in RC0\n"
                               "RC0 energy before & after sleep respectively: 
%lluuJ %lluuJ\n"
                               "RC6 energy before & after sleep respectively: 
%lluuJ %lluuJ\n",
-                              rc6_freq, rc0_freq, rc0_sample_energy[0], 
rc0_sample_energy[1],
+                              rc6_freq, rc0_freq,
+                              rc0_sample_energy[0], rc0_sample_energy[1],
                               rc6_sample_energy[0], rc6_sample_energy[1]);
 
                        diff = res[1] - res[0];
                        threshold = (9 * NSEC_PER_MSEC * sleep_time) / 10;
                        if (diff < threshold)
-                               pr_err("Did not enter RC6 properly, RC6 start 
residency=%lluns, RC6 end residency=%lluns\n",
+                               gt_err(gt,
+                                      "Did not enter RC6 properly, RC6 start 
residency=%lluns, RC6 end residency=%lluns\n",
                                       res[0], res[1]);
                        err = -EINVAL;
                        goto out_unlock;
@@ -265,12 +274,13 @@ int live_rc6_ctx_wa(void *arg)
                        }
 
                        intel_gt_pm_wait_for_idle(gt);
-                       pr_debug("%s: CTX_INFO=%0x\n",
-                                engine->name, READ_ONCE(*res));
+                       gt_dbg(gt, "%s: CTX_INFO=%0x\n",
+                              engine->name, READ_ONCE(*res));
 
                        if (resets !=
                            i915_reset_engine_count(error, engine)) {
-                               pr_err("%s: GPU reset required\n",
+                               gt_err(gt,
+                                      "%s: GPU reset required\n",
                                       engine->name);
                                add_taint_for_CI(gt->i915, TAINT_WARN);
                                err = -EIO;
diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.c 
b/drivers/gpu/drm/i915/gt/selftest_rps.c
index be77fba2ec49..0c5bccfddd3a 100644
--- a/drivers/gpu/drm/i915/gt/selftest_rps.c
+++ b/drivers/gpu/drm/i915/gt/selftest_rps.c
@@ -15,6 +15,7 @@
 #include "intel_gpu_commands.h"
 #include "intel_gt_clock_utils.h"
 #include "intel_gt_pm.h"
+#include "intel_gt_print.h"
 #include "intel_rc6.h"
 #include "selftest_engine_heartbeat.h"
 #include "selftest_rps.h"
@@ -204,12 +205,12 @@ static void show_pstate_limits(struct intel_rps *rps)
        struct drm_i915_private *i915 = rps_to_i915(rps);
 
        if (IS_BROXTON(i915)) {
-               pr_info("P_STATE_CAP[%x]: 0x%08x\n",
+               gt_info(rps_to_gt(rps), "P_STATE_CAP[%x]: 0x%08x\n",
                        i915_mmio_reg_offset(BXT_RP_STATE_CAP),
                        intel_uncore_read(rps_to_uncore(rps),
                                          BXT_RP_STATE_CAP));
        } else if (GRAPHICS_VER(i915) == 9) {
-               pr_info("P_STATE_LIMITS[%x]: 0x%08x\n",
+               gt_info(rps_to_gt(rps), "P_STATE_LIMITS[%x]: 0x%08x\n",
                        i915_mmio_reg_offset(GEN9_RP_STATE_LIMITS),
                        intel_uncore_read(rps_to_uncore(rps),
                                          GEN9_RP_STATE_LIMITS));
@@ -264,7 +265,8 @@ int live_rps_clock_interval(void *arg)
                i915_request_add(rq);
 
                if (!igt_wait_for_spinner(&spin, rq)) {
-                       pr_err("%s: RPS spinner did not start\n",
+                       gt_err(gt,
+                              "%s: RPS spinner did not start\n",
                               engine->name);
                        igt_spinner_end(&spin);
                        st_engine_heartbeat_enable(engine);
@@ -290,7 +292,8 @@ int live_rps_clock_interval(void *arg)
                                                  GEN6_RP_CUR_UP_EI),
                             10)) {
                        /* Just skip the test; assume lack of HW support */
-                       pr_notice("%s: rps evaluation interval not ticking\n",
+                       gt_notice(gt,
+                                 "%s: rps evaluation interval not ticking\n",
                                  engine->name);
                        err = -ENODEV;
                } else {
@@ -330,20 +333,23 @@ int live_rps_clock_interval(void *arg)
                        u32 expected =
                                intel_gt_ns_to_pm_interval(gt, dt);
 
-                       pr_info("%s: rps counted %d C0 cycles [%lldns] in 
%lldns [%d cycles], using GT clock frequency of %uKHz\n",
+                       gt_info(gt,
+                               "%s: rps counted %d C0 cycles [%lldns] in 
%lldns [%d cycles], using GT clock frequency of %uKHz\n",
                                engine->name, cycles, time, dt, expected,
                                gt->clock_frequency / 1000);
 
                        if (10 * time < 8 * dt ||
                            8 * time > 10 * dt) {
-                               pr_err("%s: rps clock time does not match 
walltime!\n",
+                               gt_err(gt,
+                                      "%s: rps clock time does not match 
walltime!\n",
                                       engine->name);
                                err = -EINVAL;
                        }
 
                        if (10 * expected < 8 * cycles ||
                            8 * expected > 10 * cycles) {
-                               pr_err("%s: walltime does not match rps clock 
ticks!\n",
+                               gt_err(gt,
+                                      "%s: walltime does not match rps clock 
ticks!\n",
                                       engine->name);
                                err = -EINVAL;
                        }
@@ -424,7 +430,8 @@ int live_rps_control(void *arg)
                i915_request_add(rq);
 
                if (!igt_wait_for_spinner(&spin, rq)) {
-                       pr_err("%s: RPS spinner did not start\n",
+                       gt_err(gt,
+                              "%s: RPS spinner did not start\n",
                               engine->name);
                        igt_spinner_end(&spin);
                        st_engine_heartbeat_enable(engine);
@@ -434,7 +441,8 @@ int live_rps_control(void *arg)
                }
 
                if (rps_set_check(rps, rps->min_freq) != rps->min_freq) {
-                       pr_err("%s: could not set minimum frequency [%x], only 
%x!\n",
+                       gt_err(gt,
+                              "%s: could not set minimum frequency [%x], only 
%x!\n",
                               engine->name, rps->min_freq, read_cagf(rps));
                        igt_spinner_end(&spin);
                        st_engine_heartbeat_enable(engine);
@@ -451,7 +459,8 @@ int live_rps_control(void *arg)
                limit = rps_set_check(rps, f);
 
                if (rps_set_check(rps, rps->min_freq) != rps->min_freq) {
-                       pr_err("%s: could not restore minimum frequency [%x], 
only %x!\n",
+                       gt_err(gt,
+                              "%s: could not restore minimum frequency [%x], 
only %x!\n",
                               engine->name, rps->min_freq, read_cagf(rps));
                        igt_spinner_end(&spin);
                        st_engine_heartbeat_enable(engine);
@@ -474,7 +483,8 @@ int live_rps_control(void *arg)
                igt_spinner_end(&spin);
                st_engine_heartbeat_enable(engine);
 
-               pr_info("%s: range:[%x:%uMHz, %x:%uMHz] limit:[%x:%uMHz], %x:%x 
response %lluns:%lluns\n",
+               gt_info(gt,
+                       "%s: range:[%x:%uMHz, %x:%uMHz] limit:[%x:%uMHz], %x:%x 
response %lluns:%lluns\n",
                        engine->name,
                        rps->min_freq, intel_gpu_freq(rps, rps->min_freq),
                        rps->max_freq, intel_gpu_freq(rps, rps->max_freq),
@@ -483,7 +493,8 @@ int live_rps_control(void *arg)
 
                if (limit != rps->max_freq) {
                        if (throttle)
-                               pr_warn("%s: GPU throttled with reasons 
0x%08x\n",
+                               gt_warn(gt,
+                                       "%s: GPU throttled with reasons 
0x%08x\n",
                                        engine->name, throttle);
                        show_pstate_limits(rps);
                }
@@ -523,14 +534,14 @@ static void show_pcu_config(struct intel_rps *rps)
 
        wakeref = intel_runtime_pm_get(rps_to_uncore(rps)->rpm);
 
-       pr_info("%5s  %5s  %5s\n", "GPU", "eCPU", "eRing");
+       gt_info(rps_to_gt(rps), "%5s  %5s  %5s\n", "GPU", "eCPU", "eRing");
        for (gpu_freq = min_gpu_freq; gpu_freq <= max_gpu_freq; gpu_freq++) {
                int ia_freq = gpu_freq;
 
                snb_pcode_read(rps_to_gt(rps)->uncore, 
GEN6_PCODE_READ_MIN_FREQ_TABLE,
                               &ia_freq, NULL);
 
-               pr_info("%5d  %5d  %5d\n",
+               gt_info(rps_to_gt(rps), "%5d  %5d  %5d\n",
                        gpu_freq * 50,
                        ((ia_freq >> 0) & 0xff) * 100,
                        ((ia_freq >> 8) & 0xff) * 100);
@@ -669,7 +680,8 @@ int live_rps_frequency_cs(void *arg)
 
                if (wait_for(intel_uncore_read(engine->uncore, CS_GPR(0)),
                             10)) {
-                       pr_err("%s: timed loop did not start\n",
+                       gt_err(gt,
+                              "%s: timed loop did not start\n",
                               engine->name);
                        goto err_vma;
                }
@@ -680,7 +692,8 @@ int live_rps_frequency_cs(void *arg)
                max.freq = rps->max_freq;
                max.count = measure_cs_frequency_at(rps, engine, &max.freq);
 
-               pr_info("%s: min:%lluKHz @ %uMHz, max:%lluKHz @ %uMHz [%d%%]\n",
+               gt_info(gt,
+                       "%s: min:%lluKHz @ %uMHz, max:%lluKHz @ %uMHz [%d%%]\n",
                        engine->name,
                        min.count, intel_gpu_freq(rps, min.freq),
                        max.count, intel_gpu_freq(rps, max.freq),
@@ -692,7 +705,8 @@ int live_rps_frequency_cs(void *arg)
                                   2, 3)) {
                        int f;
 
-                       pr_err("%s: CS did not scale with frequency! scaled 
min:%llu, max:%llu\n",
+                       gt_err(gt,
+                              "%s: CS did not scale with frequency! scaled 
min:%llu, max:%llu\n",
                               engine->name,
                               max.freq * min.count,
                               min.freq * max.count);
@@ -706,7 +720,8 @@ int live_rps_frequency_cs(void *arg)
                                if (act < f)
                                        break;
 
-                               pr_info("%s: %x:%uMHz: %lluKHz [%d%%]\n",
+                               gt_info(gt,
+                                       "%s: %x:%uMHz: %lluKHz [%d%%]\n",
                                        engine->name,
                                        act, intel_gpu_freq(rps, act), count,
                                        (int)DIV64_U64_ROUND_CLOSEST(100 * 
min.freq * count,
@@ -807,7 +822,8 @@ int live_rps_frequency_srm(void *arg)
                        goto err_vma;
 
                if (wait_for(READ_ONCE(*cntr), 10)) {
-                       pr_err("%s: timed loop did not start\n",
+                       gt_err(gt,
+                              "%s: timed loop did not start\n",
                               engine->name);
                        goto err_vma;
                }
@@ -818,7 +834,8 @@ int live_rps_frequency_srm(void *arg)
                max.freq = rps->max_freq;
                max.count = measure_frequency_at(rps, cntr, &max.freq);
 
-               pr_info("%s: min:%lluKHz @ %uMHz, max:%lluKHz @ %uMHz [%d%%]\n",
+               gt_info(gt,
+                       "%s: min:%lluKHz @ %uMHz, max:%lluKHz @ %uMHz [%d%%]\n",
                        engine->name,
                        min.count, intel_gpu_freq(rps, min.freq),
                        max.count, intel_gpu_freq(rps, max.freq),
@@ -830,7 +847,8 @@ int live_rps_frequency_srm(void *arg)
                                   1, 2)) {
                        int f;
 
-                       pr_err("%s: CS did not scale with frequency! scaled 
min:%llu, max:%llu\n",
+                       gt_err(gt,
+                              "%s: CS did not scale with frequency! scaled 
min:%llu, max:%llu\n",
                               engine->name,
                               max.freq * min.count,
                               min.freq * max.count);
@@ -844,7 +862,8 @@ int live_rps_frequency_srm(void *arg)
                                if (act < f)
                                        break;
 
-                               pr_info("%s: %x:%uMHz: %lluKHz [%d%%]\n",
+                               gt_info(gt,
+                                       "%s: %x:%uMHz: %lluKHz [%d%%]\n",
                                        engine->name,
                                        act, intel_gpu_freq(rps, act), count,
                                        (int)DIV64_U64_ROUND_CLOSEST(100 * 
min.freq * count,
@@ -915,7 +934,7 @@ static int __rps_up_interrupt(struct intel_rps *rps,
        i915_request_add(rq);
 
        if (!igt_wait_for_spinner(spin, rq)) {
-               pr_err("%s: RPS spinner did not start\n",
+               gt_err(engine->gt, "%s: RPS spinner did not start\n",
                       engine->name);
                i915_request_put(rq);
                intel_gt_set_wedged(engine->gt);
@@ -923,7 +942,8 @@ static int __rps_up_interrupt(struct intel_rps *rps,
        }
 
        if (!intel_rps_is_active(rps)) {
-               pr_err("%s: RPS not enabled on starting spinner\n",
+               gt_err(engine->gt,
+                      "%s: RPS not enabled on starting spinner\n",
                       engine->name);
                igt_spinner_end(spin);
                i915_request_put(rq);
@@ -931,14 +951,16 @@ static int __rps_up_interrupt(struct intel_rps *rps,
        }
 
        if (!(rps->pm_events & GEN6_PM_RP_UP_THRESHOLD)) {
-               pr_err("%s: RPS did not register UP interrupt\n",
+               gt_err(engine->gt,
+                      "%s: RPS did not register UP interrupt\n",
                       engine->name);
                i915_request_put(rq);
                return -EINVAL;
        }
 
        if (rps->last_freq != rps->min_freq) {
-               pr_err("%s: RPS did not program min frequency\n",
+               gt_err(engine->gt,
+                      "%s: RPS did not program min frequency\n",
                       engine->name);
                i915_request_put(rq);
                return -EINVAL;
@@ -955,13 +977,15 @@ static int __rps_up_interrupt(struct intel_rps *rps,
        i915_request_put(rq);
 
        if (rps->cur_freq != rps->min_freq) {
-               pr_err("%s: Frequency unexpectedly changed [up], now %d!\n",
+               gt_err(engine->gt,
+                      "%s: Frequency unexpectedly changed [up], now %d!\n",
                       engine->name, intel_rps_read_actual_frequency(rps));
                return -EINVAL;
        }
 
        if (!(rps->pm_iir & GEN6_PM_RP_UP_THRESHOLD)) {
-               pr_err("%s: UP interrupt not recorded for spinner, pm_iir:%x, 
prev_up:%x, up_threshold:%x, up_ei:%x\n",
+               gt_err(engine->gt,
+                      "%s: UP interrupt not recorded for spinner, pm_iir:%x, 
prev_up:%x, up_threshold:%x, up_ei:%x\n",
                       engine->name, rps->pm_iir,
                       intel_uncore_read(uncore, GEN6_RP_PREV_UP),
                       intel_uncore_read(uncore, GEN6_RP_UP_THRESHOLD),
@@ -981,13 +1005,15 @@ static int __rps_down_interrupt(struct intel_rps *rps,
        rps_set_check(rps, rps->max_freq);
 
        if (!(rps->pm_events & GEN6_PM_RP_DOWN_THRESHOLD)) {
-               pr_err("%s: RPS did not register DOWN interrupt\n",
+               gt_err(engine->gt,
+                      "%s: RPS did not register DOWN interrupt\n",
                       engine->name);
                return -EINVAL;
        }
 
        if (rps->last_freq != rps->max_freq) {
-               pr_err("%s: RPS did not program max frequency\n",
+               gt_err(engine->gt,
+                      "%s: RPS did not program max frequency\n",
                       engine->name);
                return -EINVAL;
        }
@@ -999,14 +1025,16 @@ static int __rps_down_interrupt(struct intel_rps *rps,
        sleep_for_ei(rps, timeout);
 
        if (rps->cur_freq != rps->max_freq) {
-               pr_err("%s: Frequency unexpectedly changed [down], now %d!\n",
+               gt_err(engine->gt,
+                      "%s: Frequency unexpectedly changed [down], now %d!\n",
                       engine->name,
                       intel_rps_read_actual_frequency(rps));
                return -EINVAL;
        }
 
        if (!(rps->pm_iir & (GEN6_PM_RP_DOWN_THRESHOLD | 
GEN6_PM_RP_DOWN_TIMEOUT))) {
-               pr_err("%s: DOWN interrupt not recorded for idle, pm_iir:%x, 
prev_down:%x, down_threshold:%x, down_ei:%x [prev_up:%x, up_threshold:%x, 
up_ei:%x]\n",
+               gt_err(engine->gt,
+                      "%s: DOWN interrupt not recorded for idle, pm_iir:%x, 
prev_down:%x, down_threshold:%x, down_ei:%x [prev_up:%x, up_threshold:%x, 
up_ei:%x]\n",
                       engine->name, rps->pm_iir,
                       intel_uncore_read(uncore, GEN6_RP_PREV_DOWN),
                       intel_uncore_read(uncore, GEN6_RP_DOWN_THRESHOLD),
@@ -1043,7 +1071,8 @@ int live_rps_interrupt(void *arg)
        with_intel_gt_pm(gt, wakeref)
                pm_events = rps->pm_events;
        if (!pm_events) {
-               pr_err("No RPS PM events registered, but RPS is enabled?\n");
+               gt_err(gt,
+                      "No RPS PM events registered, but RPS is enabled?\n");
                return -ENODEV;
        }
 
@@ -1186,7 +1215,8 @@ int live_rps_power(void *arg)
                i915_request_add(rq);
 
                if (!igt_wait_for_spinner(&spin, rq)) {
-                       pr_err("%s: RPS spinner did not start\n",
+                       gt_err(gt,
+                              "%s: RPS spinner did not start\n",
                               engine->name);
                        igt_spinner_end(&spin);
                        st_engine_heartbeat_enable(engine);
@@ -1207,28 +1237,33 @@ int live_rps_power(void *arg)
                igt_spinner_end(&spin);
                st_engine_heartbeat_enable(engine);
 
-               pr_info("%s: min:%llumW @ %uMHz, max:%llumW @ %uMHz\n",
+               gt_info(gt,
+                       "%s: min:%llumW @ %uMHz, max:%llumW @ %uMHz\n",
                        engine->name,
                        min.power, intel_gpu_freq(rps, min.freq),
                        max.power, intel_gpu_freq(rps, max.freq));
 
                if (10 * min.freq >= 9 * max.freq) {
-                       pr_notice("Could not control frequency, ran at 
[%d:%uMHz, %d:%uMhz]\n",
+                       gt_notice(gt,
+                                 "Could not control frequency, ran at 
[%d:%uMHz, %d:%uMhz]\n",
                                  min.freq, intel_gpu_freq(rps, min.freq),
                                  max.freq, intel_gpu_freq(rps, max.freq));
 
                        if (throttle)
-                               pr_warn("%s: GPU throttled with reasons 
0x%08x\n",
+                               gt_warn(gt,
+                                       "%s: GPU throttled with reasons 
0x%08x\n",
                                        engine->name, throttle);
                        continue;
                }
 
                if (11 * min.power > 10 * max.power) {
-                       pr_err("%s: did not conserve power when setting lower 
frequency!\n",
+                       gt_err(gt,
+                              "%s: did not conserve power when setting lower 
frequency!\n",
                               engine->name);
 
                        if (throttle)
-                               pr_warn("%s: GPU throttled with reasons 
0x%08x\n",
+                               gt_warn(gt,
+                                       "%s: GPU throttled with reasons 
0x%08x\n",
                                        engine->name, throttle);
 
                        err = -EINVAL;
@@ -1273,9 +1308,9 @@ int live_rps_dynamic(void *arg)
                return -ENOMEM;
 
        if (intel_rps_has_interrupts(rps))
-               pr_info("RPS has interrupt support\n");
+               gt_info(gt, "RPS has interrupt support\n");
        if (intel_rps_uses_timer(rps))
-               pr_info("RPS has timer support\n");
+               gt_info(gt, "RPS has timer support\n");
 
        for_each_engine(engine, gt, id) {
                struct i915_request *rq;
@@ -1318,18 +1353,21 @@ int live_rps_dynamic(void *arg)
                min.freq = wait_for_freq(rps, rps->min_freq, 2000);
                min.dt = ktime_sub(ktime_get(), min.dt);
 
-               pr_info("%s: dynamically reclocked to %u:%uMHz while busy in 
%lluns, and %u:%uMHz while idle in %lluns\n",
+               gt_info(gt,
+                       "%s: dynamically reclocked to %u:%uMHz while busy in 
%lluns, and %u:%uMHz while idle in %lluns\n",
                        engine->name,
                        max.freq, intel_gpu_freq(rps, max.freq),
                        ktime_to_ns(max.dt),
                        min.freq, intel_gpu_freq(rps, min.freq),
                        ktime_to_ns(min.dt));
                if (min.freq >= max.freq) {
-                       pr_err("%s: dynamic reclocking of spinner failed\n!",
+                       gt_err(gt,
+                              "%s: dynamic reclocking of spinner failed\n!",
                               engine->name);
 
                        if (throttle)
-                               pr_warn("%s: GPU throttled with reasons 
0x%08x\n",
+                               gt_warn(gt,
+                                       "%s: GPU throttled with reasons 
0x%08x\n",
                                        engine->name, throttle);
 
                        err = -EINVAL;
-- 
2.34.1

Reply via email to