NXP Confidential
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: Sunday, September 13, 2026 3:29 PM
> To: Rob Clark <[email protected]>; Dmitry Baryshkov
> <[email protected]>; Abhinav Kumar <[email protected]>; Jessica
> Zhang <[email protected]>; Sean Paul <[email protected]>; Marijn
> Suijten <[email protected]>; David Airlie <[email protected]>;
> Simona Vetter <[email protected]>; Maarten Lankhorst
> <[email protected]>; Maxime Ripard <[email protected]>;
> Thomas Zimmermann <[email protected]>; Rob Herring
> <[email protected]>; Krzysztof Kozlowski <[email protected]>; Conor Dooley
> <[email protected]>; Justin Chen <[email protected]>; Florian
> Fainelli <[email protected]>; Andrew Lunn
> <[email protected]>; David S. Miller <[email protected]>; Eric
> Dumazet <[email protected]>; Jakub Kicinski <[email protected]>; Paolo
> Abeni <[email protected]>; Hans Ulli Kroll <[email protected]>;
> Linus Walleij <[email protected]>; Clément Léger
> <[email protected]>; Vladimir Oltean <[email protected]>; Heiner
> Kallweit <[email protected]>; Russell King <[email protected]>;
> Kunihiko Hayashi <[email protected]>; Masami Hiramatsu
> <[email protected]>; Felix Fietkau <[email protected]>; Lorenzo Bianconi
> <[email protected]>; Ryder Lee <[email protected]>; Shayne Chen
> <[email protected]>; Sean Wang <[email protected]>;
> Johannes Berg <[email protected]>; Matthias Brugger
> <[email protected]>; AngeloGioacchino Del Regno
> <[email protected]>; Jeff Johnson
> <[email protected]>; Richard Cochran <[email protected]>; Geert
> Uytterhoeven <[email protected]>; Magnus Damm
> <[email protected]>; Yongxing Mou
> <[email protected]>; Robert Foss <[email protected]>; Abel
> Vesa <[email protected]>; G. Jaya Kumaran
> <[email protected]>; Claudiu Manoil
> <[email protected]>; Alexandre Belloni
> <[email protected]>; Alex Elder <[email protected]>; Siddharth
> Vadapalli <[email protected]>; Roger Quadros <[email protected]>; linux-
> [email protected]; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]; [email protected];
> [email protected]; [email protected]; linux-renesas-
> [email protected]; [email protected]; linux-
> [email protected]; [email protected]
> Cc: Krzysztof Kozlowski <[email protected]>
> Subject: [PATCH net-next] dt-bindings: net: Use consistent indentation in the
> example
>
> Correct indentation in the examples to consistent 2- or 4-spaces
> indentation to fix dt-check-style warnings ("example 0
> [indent-consistent] indent mismatch ...").  Preferred is 4-spaces, but
> re-indenting entire example just for that is too much churn.
>
> Signed-off-by: Krzysztof Kozlowski
> <[email protected]>
> ---
>  .../bindings/net/brcm,asp-v2.0.yaml           |  2 +-
>  .../bindings/net/cortina,gemini-ethernet.yaml | 52 ++++++--------
>  .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  4 +-
>  .../bindings/net/intel,dwmac-plat.yaml        |  6 +-
>  .../devicetree/bindings/net/mdio-gpio.yaml    | 16 ++---
>  .../bindings/net/mscc,vsc7514-switch.yaml     |  8 +--
>  .../devicetree/bindings/net/qcom,ipa.yaml     | 10 +--
>  .../bindings/net/realtek,rtl82xx.yaml         |  6 +-
>  .../bindings/net/socionext,uniphier-ave4.yaml | 32 ++++-----
>  .../bindings/net/ti,cpsw-switch.yaml          | 70 +++++++++----------
>  .../bindings/net/wireless/mediatek,mt76.yaml  | 32 ++++-----
>  .../bindings/net/wireless/qcom,ath10k.yaml    |  2 +-
>  12 files changed, 114 insertions(+), 126 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> index a3db6d594c8c..7fcc564e820c 100644
> --- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
> @@ -123,7 +123,7 @@ examples:
>              phy0: ethernet-phy@1 {
>                  reg = <1>;
>              };
> -       };
> +        };
>
>          mdio@ce14 {
>              compatible = "brcm,asp-v2.1-mdio";
> diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-
> ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-
> ethernet.yaml
> index f0b5bea2458d..da9bc170cd54 100644
> --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
> @@ -87,18 +87,6 @@ examples:
>      #include <dt-bindings/interrupt-controller/irq.h>
>      #include <dt-bindings/clock/cortina,gemini-clock.h>
>      #include <dt-bindings/reset/cortina,gemini-reset.h>
> -    mdio0: mdio {
> -      #address-cells = <1>;
> -      #size-cells = <0>;
> -      phy0: ethernet-phy@1 {
> -        reg = <1>;
> -        device_type = "ethernet-phy";
> -      };
> -      phy1: ethernet-phy@3 {
> -        reg = <3>;
> -        device_type = "ethernet-phy";
> -      };
> -    };
>
>      ethernet@60000000 {
>          compatible = "cortina,gemini-ethernet";
> @@ -110,28 +98,28 @@ examples:
>          ranges;
>
>          gmac0: ethernet-port@0 {
> -                compatible = "cortina,gemini-ethernet-port";
> -                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
> -                      <0x6000a000 0x2000>; /* Port 0 GMAC */
> -                interrupt-parent = <&intcon>;
> -                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
> -                resets = <&syscon GEMINI_RESET_GMAC0>;
> -                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
> -                clock-names = "PCLK";
> -                phy-mode = "rgmii";
> -                phy-handle = <&phy0>;
> +            compatible = "cortina,gemini-ethernet-port";
> +            reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
> +                  <0x6000a000 0x2000>; /* Port 0 GMAC */
> +            interrupt-parent = <&intcon>;
> +            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
> +            resets = <&syscon GEMINI_RESET_GMAC0>;
> +            clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
> +            clock-names = "PCLK";
> +            phy-mode = "rgmii";
> +            phy-handle = <&phy0>;
>          };
>
>          gmac1: ethernet-port@1 {
> -                compatible = "cortina,gemini-ethernet-port";
> -                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
> -                      <0x6000e000 0x2000>; /* Port 1 GMAC */
> -                interrupt-parent = <&intcon>;
> -                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> -                resets = <&syscon GEMINI_RESET_GMAC1>;
> -                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
> -                clock-names = "PCLK";
> -                phy-mode = "rgmii";
> -                phy-handle = <&phy1>;
> +            compatible = "cortina,gemini-ethernet-port";
> +            reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
> +                  <0x6000e000 0x2000>; /* Port 1 GMAC */
> +            interrupt-parent = <&intcon>;
> +            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +            resets = <&syscon GEMINI_RESET_GMAC1>;
> +            clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
> +            clock-names = "PCLK";
> +            phy-mode = "rgmii";
> +            phy-handle = <&phy1>;
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-
> a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-
> a5psw.yaml
> index ea285ef3e64f..fab6aa6237e9 100644
> --- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-
> a5psw.yaml
> @@ -127,8 +127,8 @@ examples:
>                  phy-mode = "internal";
>
>                  fixed-link {
> -                  speed = <1000>;
> -                  full-duplex;
> +                    speed = <1000>;
> +                    full-duplex;
>                  };
>              };
>          };
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index 62c1da36a2b5..d1522216d32b 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -91,9 +91,9 @@ examples:
>          snps,tx-queues-to-use = <2>;
>          snps,tx-sched-wrr;
>          queue0 {
> -           snps,weight = <0x10>;
> -           snps,dcb-algorithm;
> -           snps,priority = <0x0>;
> +            snps,weight = <0x10>;
> +            snps,dcb-algorithm;
> +            snps,priority = <0x0>;
>          };
>
>          queue1 {
> diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml
> b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
> index eb4171a1940e..36e51aaae9c0 100644
> --- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml
> +++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
> @@ -45,13 +45,13 @@ examples:
>      };
>
>      mdio0: mdio {
> -      compatible = "virtual,mdio-gpio";
> -      #address-cells = <1>;
> -      #size-cells = <0>;
> -      gpios = <&qe_pio_a 11>,
> -              <&qe_pio_c 6>;
> -      ethphy0: ethernet-phy@0 {
> -        reg = <0>;
> -      };
> +        compatible = "virtual,mdio-gpio";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        gpios = <&qe_pio_a 11>,
> +                <&qe_pio_c 6>;
> +        ethphy0: ethernet-phy@0 {
> +            reg = <0>;
> +        };
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-
> switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-
> switch.yaml
> index 86a9c3fc76c8..d825130b54b4 100644
> --- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
> @@ -197,10 +197,10 @@ examples:
>              <0x71040000 0x10000>,
>              <0x71050000 0x10000>,
>              <0x71060000 0x10000>;
> -            reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> -            "port2", "port3", "port4", "port5", "port6",
> -            "port7", "port8", "port9", "port10", "qsys",
> -            "ana", "s0", "s1", "s2";
> +      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
> +                  "port2", "port3", "port4", "port5", "port6",
> +                  "port7", "port8", "port9", "port10", "qsys",
> +                  "ana", "s0", "s1", "s2";
>
>        ethernet-ports {
>          #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> index 68ec76fe4473..38e3830512fe 100644
> --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
> @@ -246,14 +246,14 @@ examples:
>          qcom,remote-pid = <5>;
>
>          ipa_smp2p_out: ipa-ap-to-modem {
> -                qcom,entry-name = "ipa";
> -                #qcom,smem-state-cells = <1>;
> +            qcom,entry-name = "ipa";
> +            #qcom,smem-state-cells = <1>;
>          };
>
>          ipa_smp2p_in: ipa-modem-to-ap {
> -                qcom,entry-name = "ipa";
> -                interrupt-controller;
> -                #interrupt-cells = <2>;
> +            qcom,entry-name = "ipa";
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
>          };
>      };
>
> diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
> b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
> index 45033c31a2d5..07b39ef1fc62 100644
> --- a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
> +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
> @@ -91,8 +91,8 @@ examples:
>          #size-cells = <0>;
>
>          ethphy1: ethernet-phy@1 {
> -                reg = <1>;
> -                realtek,clkout-disable;
> -                realtek,aldps-enable;
> +            reg = <1>;
> +            realtek,clkout-disable;
> +            realtek,aldps-enable;
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-
> ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-
> ave4.yaml
> index 4eb63b303cff..8c8622160abb 100644
> --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
> +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
> @@ -121,22 +121,22 @@ examples:
>    - |
>      ether: ethernet@65000000 {
>          compatible = "socionext,uniphier-ld20-ave4";
> -                reg = <0x65000000 0x8500>;
> -                interrupts = <0 66 4>;
> -                phy-mode = "rgmii";
> -                phy-handle = <&ethphy>;
> -                clock-names = "ether";
> -                clocks = <&sys_clk 6>;
> -                reset-names = "ether";
> -                resets = <&sys_rst 6>;
> -                socionext,syscon-phy-mode = <&soc_glue 0>;
> +        reg = <0x65000000 0x8500>;
> +        interrupts = <0 66 4>;
> +        phy-mode = "rgmii";
> +        phy-handle = <&ethphy>;
> +        clock-names = "ether";
> +        clocks = <&sys_clk 6>;
> +        reset-names = "ether";
> +        resets = <&sys_rst 6>;
> +        socionext,syscon-phy-mode = <&soc_glue 0>;
>
> -                mdio {
> -                        #address-cells = <1>;
> -                        #size-cells = <0>;
> +        mdio {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
>
> -                        ethphy: ethernet-phy@1 {
> -                                reg = <1>;
> -                        };
> -                };
> +            ethphy: ethernet-phy@1 {
> +                reg = <1>;
> +            };
>          };
> +    };
> diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> index 8b5da602a2e8..4d24dadfaa5d 100644
> --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
> @@ -192,50 +192,50 @@ examples:
>          interrupt-names = "rx_thresh", "rx", "tx", "misc";
>
>          ethernet-ports {
> -                #address-cells = <1>;
> -                #size-cells = <0>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
>
> -                cpsw_port1: port@1 {
> -                        reg = <1>;
> -                        label = "port1";
> -                        mac-address = [ 00 00 00 00 00 00 ];
> -                        phys = <&phy_gmii_sel 1>;
> -                        phy-handle = <&ethphy0_sw>;
> -                        phy-mode = "rgmii";
> -                        ti,dual-emac-pvid = <1>;
> -                };
> +            cpsw_port1: port@1 {
> +                reg = <1>;
> +                label = "port1";
> +                mac-address = [ 00 00 00 00 00 00 ];
> +                phys = <&phy_gmii_sel 1>;
> +                phy-handle = <&ethphy0_sw>;
> +                phy-mode = "rgmii";
> +                ti,dual-emac-pvid = <1>;
> +            };
>
> -                cpsw_port2: port@2 {
> -                        reg = <2>;
> -                        label = "wan";
> -                        mac-address = [ 00 00 00 00 00 00 ];
> -                        phys = <&phy_gmii_sel 2>;
> -                        phy-handle = <&ethphy1_sw>;
> -                        phy-mode = "rgmii";
> -                        ti,dual-emac-pvid = <2>;
> -                };
> +            cpsw_port2: port@2 {
> +                reg = <2>;
> +                label = "wan";
> +                mac-address = [ 00 00 00 00 00 00 ];
> +                phys = <&phy_gmii_sel 2>;
> +                phy-handle = <&ethphy1_sw>;
> +                phy-mode = "rgmii";
> +                ti,dual-emac-pvid = <2>;
> +            };
>          };
>
>          davinci_mdio_sw: mdio@1000 {
> -                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> -                reg = <0x1000 0x100>;
> -                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
> -                clock-names = "fck";
> -                #address-cells = <1>;
> -                #size-cells = <0>;
> -                bus_freq = <1000000>;
> +            compatible = "ti,cpsw-mdio","ti,davinci_mdio";
> +            reg = <0x1000 0x100>;
> +            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
> +            clock-names = "fck";
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            bus_freq = <1000000>;
>
> -                ethphy0_sw: ethernet-phy@0 {
> -                        reg = <0>;
> -                };
> +            ethphy0_sw: ethernet-phy@0 {
> +                reg = <0>;
> +            };
>
> -                ethphy1_sw: ethernet-phy@1 {
> -                        reg = <1>;
> -                };
> +            ethphy1_sw: ethernet-phy@1 {
> +                reg = <1>;
> +            };
>          };
>
>          cpts {
> -                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
> -                clock-names = "cpts";
> +            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
> +            clock-names = "cpts";
>          };
>      };
> diff --git
> a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
> b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
> index ae6b97cdc44b..bf4116b057d2 100644
> --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
> @@ -325,22 +325,22 @@ examples:
>            r0 {
>              regdomain = "FCC";
>              txpower-5g {
> -               b0 {
> -                   channels = <36 48>;
> -                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
> -                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
> -                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
> -                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 
> 22>,
> -                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 
> 20>;
> -               };
> -               b1 {
> -                   channels = <100 181>;
> -                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
> -                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
> -                   txs-delta = <12 9 6>;
> -                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 
> 14>;
> -               };
> -             };
> +              b0 {
> +                channels = <36 48>;
> +                rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
> +                rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
> +                            /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
> +                rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
> +                           /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
> +              };
> +              b1 {
> +                channels = <100 181>;
> +                rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
> +                rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
> +                txs-delta = <12 9 6>;
> +                rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
> +              };
> +            };
>            };
>          };
>        };
> diff --git
> a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> index e667d78b3ab3..a52cb8a0d409 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
> @@ -408,4 +408,4 @@ examples:
>                            "msi15",
>                            "legacy";
>          ieee80211-freq-limit = <5470000 5875000>;
> -      };
> +    };
> --
> 2.53.0

Reply via email to