[PATCH 2/2] ARM: dts: ls1021a-iot: rename display@0 to display0

[Frank . Li]

From: Frank Li <frank...@nxp.com>

Rename node name display@0 to display0 since no reg under it. Rename mode0
to timing0.

Fix below CHECK_DTBS warnings:

arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: dcu@2ce0000 (fsl,ls1021a-dcu): 
'display', 'display@0' do not match any of the regexes: '^pinctrl-[0-9]+$'
        from schema $id: 
http://devicetree.org/schemas/display/fsl,ls1021a-dcu.yaml
arch/arm/boot/dts/nxp/ls/ls1021a-iot.dtb: display-timings: 'mode0' does not 
match any of the regexes: '^pinctrl-[0-9]+$', '^timing'
        from schema $id: 
http://devicetree.org/schemas/display/panel/display-timings.yaml

Signed-off-by: Frank Li <frank...@nxp.com>
---
 arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts 
b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
index e13ccae629a71..07b01434fc047 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-iot.dts
@@ -82,13 +82,13 @@ &dcu {
        display = <&display>;
        status = "okay";
 
-       display: display@0 {
+       display: display0 {
                bits-per-pixel = <24>;
 
                display-timings {
                        native-mode = <&timing0>;
 
-                       timing0: mode0 {
+                       timing0: timing0 {
                                clock-frequency = <25000000>;
                                hactive = <640>;
                                vactive = <480>;

-- 
2.43.0