ILI7807S is a DSI display controller used to drive MIPI-DSI panels.
The DLC DLC0697 1080x1920 LCD panel is based on this controller.

The panel requires a reset GPIO, I/O voltage supply (vddi), positive
LCD bias supply (avdd) and negative LCD bias supply (avee). The panel
operates in video burst mode with four data lanes using RGB888 pixel
format.

Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Arpit Saini <[email protected]>
---
 .../bindings/display/panel/ilitek,ili7807s.yaml    | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git 
a/Documentation/devicetree/bindings/display/panel/ilitek,ili7807s.yaml 
b/Documentation/devicetree/bindings/display/panel/ilitek,ili7807s.yaml
new file mode 100644
index 000000000000..ba8c5bbf8ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili7807s.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili7807s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI7807S-based DSI panels
+
+maintainers:
+  - Arpit Saini <[email protected]>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - dlc,dlc0697
+      - const: ilitek,ili7807s
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddi-supply:
+    description: I/O voltage supply (1.8V)
+
+  avdd-supply:
+    description: Positive LCD bias supply (AVDD), typically +5.5V
+      (range 4.5V to 6.3V)
+
+  avee-supply:
+    description: Negative LCD bias supply (AVEE), typically -5.5V
+      (range -6.3V to -4.5V)
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vddi-supply
+  - avdd-supply
+  - avee-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "dlc,dlc0697", "ilitek,ili7807s";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+            vddi-supply = <&pm4125_l15>;
+            avdd-supply = <&avdd>;
+            avee-supply = <&avee>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };

-- 
2.34.1

Reply via email to