Hi Tomi and Marek,

Thank you for the patch.

On Fri, May 15, 2026 at 12:09:30PM +0300, Tomi Valkeinen wrote:
> From: Marek Vasut <[email protected]>
> 
> The Renesas DSC Display Stream Compression is a bridge embedded in the
> Renesas R-Car V4H SoC. The bridge is placed between DU and DSI1 units.
> 
> The current dtsi file does not represent the DSC at all, and thus the
> pipeline for DSI1 has not been functional.
> 
> Signed-off-by: Marek Vasut <[email protected]>
> [tomi.valkeinen: separated the sparrowhawk changes]
> Signed-off-by: Tomi Valkeinen <[email protected]>

Reviewed-by: Laurent Pinchart <[email protected]>

> ---
>  arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 31 
> ++++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi 
> b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> index 82a7278836e5..52a6176f9fd0 100644
> --- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
> @@ -2298,6 +2298,35 @@ du_out_dsi0: endpoint {
>                               port@1 {
>                                       reg = <1>;
>                                       du_out_dsi1: endpoint {
> +                                             remote-endpoint = 
> <&dsc_in_dsi1>;
> +                                     };
> +                             };
> +                     };
> +             };
> +
> +             dsc: dsc@feb8d000 {
> +                     compatible = "renesas,r8a779g0-dsc";
> +                     reg = <0 0xfeb8d000 0 0x400>;
> +                     interrupts = <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&cpg CPG_MOD 2819>;
> +                     power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>;
> +                     resets = <&cpg 2819>;
> +                     status = "disabled";
> +
> +                     ports {
> +                             #address-cells = <1>;
> +                             #size-cells = <0>;
> +
> +                             port@0 {
> +                                     reg = <0>;
> +                                     dsc_in_dsi1: endpoint {
> +                                             remote-endpoint = 
> <&du_out_dsi1>;
> +                                     };
> +                             };
> +
> +                             port@1 {
> +                                     reg = <1>;
> +                                     dsc_out_dsi1: endpoint {
>                                               remote-endpoint = <&dsi1_in>;
>                                       };
>                               };
> @@ -2534,7 +2563,7 @@ ports {
>                               port@0 {
>                                       reg = <0>;
>                                       dsi1_in: endpoint {
> -                                             remote-endpoint = 
> <&du_out_dsi1>;
> +                                             remote-endpoint = 
> <&dsc_out_dsi1>;
>                                       };
>                               };
>  
> 

-- 
Regards,

Laurent Pinchart

Reply via email to