On Mon, Oct 13, 2025 at 05:34:06PM +0300, Dmitry Baryshkov wrote: > On Mon, Oct 13, 2025 at 09:17:04PM +0800, Junjie Cao wrote: > > Dmitry Baryshkov <[email protected]> 于2025年10月13日周一 20:31写道： > > > On Mon, Oct 13, 2025 at 07:04:43PM +0800, Junjie Cao wrote: > > > > Dmitry Baryshkov <[email protected]> 于2025年10月13日周一 > > > > 17:39写道： > > > > > On 13/10/2025 04:52, 曹俊杰 wrote: > > > > > > >Dmitry Baryshkov <[email protected] > > > > > > <mailto:[email protected]>> 于2025年10月2日周四 10:04写道： > > > > > > >On Wed, Oct 01, 2025 at 09:59:13PM +0800, Junjie Cao wrote: > > > > > > >> From: Jun Nie <[email protected] <mailto:[email protected]>> > > > > > > >> > > > > > > >> Some panels support multiple slice to be sent in a single DSC > > > > > > packet. And > > > > > > >> this feature is a must for specific panels, such as JDI > > > > > > LPM026M648C. > > > > > > Add a > > > > > > >> dsc_slice_per_pkt member into struct mipi_dsi_device and > > > > > > support the > > > > > > >> feature in msm mdss driver. > > > > > > >> > > > > > > >> Co-developed-by: Jonathan Marek <[email protected] > > > > > > <mailto:[email protected]>> > > > > > > >> Signed-off-by: Jonathan Marek <[email protected] > > > > > > <mailto:[email protected]>> > > > > > > >> Signed-off-by: Jun Nie <[email protected] > > > > > > <mailto:[email protected]>> > > > > > > >> Signed-off-by: Junjie Cao <[email protected] > > > > > > <mailto:[email protected]>> > > > > > > >> --- > > > > > > >> drivers/gpu/drm/msm/dsi/dsi_host.c | 25 > > > > > > ++++++++++--------------- > > > > > > >> include/drm/drm_mipi_dsi.h | 2 ++ > > > > > > >> 2 files changed, 12 insertions(+), 15 deletions(-) > > > > > > > > > > > > > >Please extract the generic part, so that it can be merged through > > > > > > a > > > > > > >generic tree. > > > > > > > > > > > > > > > > > > > Sorry, I don't get it. The generic part, generic tree? Do you mean > > > > > > the drm tree? `slice_per_pkt >= 2` is seen on the panels of these > > > > > > tablets that are equipped with qcom chips. I don't know if these > > > > > > panels are used on other platforms, and if it is necessary to do it > > > > > > in drm. > > > > > > > > > > There are two changes here: > > > > > - MIPI DSI header change > > > > > - msm DSI driver > > > > > > > > > > I've asked to split it to those two commits so that he change for > > > > > drm_mipi_dsi.h is more obvious for reviewers and so that it can be > > > > > merged through a drm-misc tree (or through drm-msm tree provided it > > > > > gets > > > > > a necessary ack). > > > > > > > > > > > > > Thanks for your clear explanation. > > > > > > > > I don't mind to add the field separately. But should I submit it > > > > with the panel driver together? Otherwise, this field is unused > > > > for a while. > > > > > > > > However, as you mentioned, this is not a part of standard, neither > > > > mipi dsi nor VESA DSC. Recently, only Qualcomm devices require it > > > > to calculate parameters, then we use them to program registers. Why > > > > don't we parse the field from devicetree? > > > > > > Because the value is uniquelly identified by the panel's compat string. > > > > > > > Yes, it is panel specified. > > But can we set it for every panel like > > > > &mdss_dsi0 { > > qcom,mdss-dsc-slice-per-pkt = <2>; > > > > status = "okay"; > > > > panel: panel@0 { > > compatible = "foo,bar"; > > reg = <0>; > > }; > > }; > > > > or moving the property to panel node? We access it from child node. > > Why do you need it in DT if the panel driver can provide this > information.
Hello, I need this patch for the Tianma TA066VVHM03 on the ASUS ROG Phone 3. Is the only change required at this point to split the generic part, and is a v2 in the works to address this? > > -- > With best wishes > Dmitry Thanks, Alex
