Hello Heiko, Damon, On Mon Jan 19, 2026 at 5:06 PM CET, Heiko Stübner wrote: > Hi Damon, > > Am Mittwoch, 17. Dezember 2025, 10:33:03 Mitteleuropäische Normalzeit schrieb > Damon Ding: >> PATCH 1 is to ensure the last bridge declares OP_EDID or OP_MODES or both. >> PATCH 2 is a small format optimization for struct analogid_dp_device. >> PATCH 3 is to perform mode setting in &drm_bridge_funcs.atomic_enable. >> PATCH 4 is to add a new parameter to store the point of next bridge. >> PATCH 5 is to make legacy bridge driver more universal. >> PATCH 6-11 are preparations for apply drm_bridge_connector helper. >> PATCH 12 is to apply the drm_bridge_connector helper. >> PATCH 13-15 are to move the panel/bridge parsing to the Analogix side. >> PATCH 16 is to attach the next bridge on Analogix side uniformly. >> PATCH 17-18 are to apply the panel_bridge helper. > > On top of all the recent bridge-related commits, this series still works > on my rk3588-eDP board - when the display is plugged in on boot. > > As that is the current state we also had before, this series: > Tested-by: Heiko Stuebner <[email protected]> on rk3588
I'm appplying patches 1-3 and got a checkpatch warning for each patch: WARNING: Unexpected content after email: 'Heiko Stuebner <[email protected]> on rk3588', should be: 'Heiko Stuebner <[email protected]> (on rk3588)' I'm fixing it while applying those 3 patches. Damon, can you fix that for the remaining patches before sending a new iteration? Luca -- Luca Ceresoli, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
