On Fri, Dec 19, 2025 at 05:41:10PM +0100, Luca Weiss wrote:
> Add definitions for the display hardware used on the Qualcomm Milos
> platform.
>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
> .../gpu/drm/msm/disp/dpu1/catalog/dpu_10_2_milos.h | 284
> +++++++++++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 22 ++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> 4 files changed, 308 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_10_2_milos.h
> b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_10_2_milos.h
> new file mode 100644
> index 000000000000..75deec923897
> --- /dev/null
> +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_10_2_milos.h
> @@ -0,0 +1,284 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2015-2018, 2020 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2025, Luca Weiss <[email protected]>
> + */
> +
> +#ifndef _DPU_10_2_MILOS_H
> +#define _DPU_10_2_MILOS_H
> +
> +static const struct dpu_caps milos_dpu_caps = {
> + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH, // OK
> + .max_mixer_blendstages = 0x7, // OK
> + .has_src_split = true, // OK
> + .has_dim_layer = true, // OK
> + .has_idle_pc = true, // OK?
> + .has_3d_merge = true, // OK?
> + .max_linewidth = 8192, // OK
> + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE, // OK
> +};
> +
> +static const struct dpu_mdp_cfg milos_mdp = {
> + .name = "top_0",
> + .base = 0, .len = 0x494, // TODO? maybe qcom,sde-len = <0x488>;
> + .clk_ctrls = {
> + [DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
> // OK
> + },
> +};
> +
> +static const struct dpu_ctl_cfg milos_ctl[] = { // number of ctl is okay,
> base probably also
> + {
> + .name = "ctl_0", .id = CTL_0,
> + .base = 0x15000, .len = 0x1000,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 9), // FIXME?
Why is it questionable?
> + }, {
> + .name = "ctl_1", .id = CTL_1,
> + .base = 0x16000, .len = 0x1000,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 10),
> + }, {
> + .name = "ctl_2", .id = CTL_2,
> + .base = 0x17000, .len = 0x1000,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 11),
> + }, {
> + .name = "ctl_3", .id = CTL_3,
> + .base = 0x18000, .len = 0x1000,
> + .intr_start = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR2, 12),
> + },
> +};
> +
> +static const struct dpu_sspp_cfg milos_sspp[] = {
> + {
> + .name = "sspp_0", .id = SSPP_VIG0, // OK
> + .base = 0x4000, .len = 0x344, // OK
> + .features = VIG_SDM845_MASK_SDMA, // TODO?
> + .sblk = &dpu_vig_sblk_qseed3_3_3, // TODO?
Yes to both.
> + .xin_id = 0, // OK
> + .type = SSPP_TYPE_VIG, // OK
> + }, {
> + .name = "sspp_8", .id = SSPP_DMA0, // FIXME name?
ok
> + .base = 0x24000, .len = 0x344,
> + .features = DMA_SDM845_MASK_SDMA,
> + .sblk = &dpu_dma_sblk,
> + .xin_id = 1, // OK
> + .type = SSPP_TYPE_DMA, // OK
> + }, {
> + .name = "sspp_9", .id = SSPP_DMA1,
> + .base = 0x26000, .len = 0x344,
> + .features = DMA_SDM845_MASK_SDMA,
> + .sblk = &dpu_dma_sblk,
> + .xin_id = 5, // OK
> + .type = SSPP_TYPE_DMA, // OK
> + }, {
> + .name = "sspp_10", .id = SSPP_DMA2,
> + .base = 0x28000, .len = 0x344,
> + .features = DMA_SDM845_MASK_SDMA,
> + .sblk = &dpu_dma_sblk,
> + .xin_id = 9, // OK
> + .type = SSPP_TYPE_DMA, // OK
> + },
> +};
> +
> +static const struct dpu_lm_cfg milos_lm[] = {
> + {
> + .name = "lm_0", .id = LM_0, // OK
> + .base = 0x44000, .len = 0x400,// OK
> + .features = MIXER_MSM8998_MASK, // TODO
> + .sblk = &sdm845_lm_sblk, // OK
> + .pingpong = PINGPONG_0, // TODO
> + .dspp = DSPP_0, // TODO
Yes to both
> + }, {
> + .name = "lm_2", .id = LM_2,
> + .base = 0x46000, .len = 0x400,
> + .features = MIXER_MSM8998_MASK,
> + .sblk = &sdm845_lm_sblk, // OK
> + .lm_pair = LM_3, // OK
> + .pingpong = PINGPONG_2,
> + //.dspp = DSPP_2, // FIXME?
none
> + }, {
> + .name = "lm_3", .id = LM_3,
> + .base = 0x47000, .len = 0x400,
> + .features = MIXER_MSM8998_MASK,
> + .sblk = &sdm845_lm_sblk, // OK
> + .lm_pair = LM_2, // OK
> + .pingpong = PINGPONG_3,
> + //.dspp = DSPP_3, // FIXME?
none
> + },
> +};
> +
> +static const struct dpu_dspp_cfg milos_dspp[] = {
> + {
> + .name = "dspp_0", .id = DSPP_0, // OK
> + .base = 0x54000, .len = 0x1800, // OK
> + .sblk = &sdm845_dspp_sblk, // TODO
yes
> + },
> +};
> +
> +static const struct dpu_pingpong_cfg milos_pp[] = {
> + {
> + .name = "pingpong_0", .id = PINGPONG_0, // OK
> + .base = 0x69000, .len = 0, // OK
> + .sblk = &sc7280_pp_sblk, // OK
> + .merge_3d = MERGE_3D_0, // OK
none
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 8), // TODO
assumingly correct
> + }, {
> + .name = "pingpong_2", .id = PINGPONG_2, // TODO
Yes
> + .base = 0x6b000, .len = 0, // OK
> + .sblk = &sc7280_pp_sblk, // OK
> + .merge_3d = MERGE_3D_1, // OK
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 10),
> + }, {
> + .name = "pingpong_3", .id = PINGPONG_3,
> + .base = 0x6c000, .len = 0, // OK
> + .sblk = &sc7280_pp_sblk, // OK
> + .merge_3d = MERGE_3D_1, // OK
> + .intr_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 11),
> + }, {
> + .name = "pingpong_cwb_0", .id = PINGPONG_CWB_0,
> + .base = 0x66000, .len = 0, // OK
> + .sblk = &sc7280_pp_sblk, // OK
> + },
> +};
> +
> +static const struct dpu_merge_3d_cfg milos_merge_3d[] = {
> + {
> + .name = "merge_3d_1", .id = MERGE_3D_1, // TODO
> + .base = 0x4f000, .len = 0x8,
> + },
> +};
> +
> +/*
> + * NOTE: Each display compression engine (DCE) contains dual hard
> + * slice DSC encoders so both share same base address but with
> + * its own different sub block address.
> + */
> +static const struct dpu_dsc_cfg milos_dsc[] = {
> + {
> + .name = "dce_0_0", .id = DSC_0, // OK
> + .base = 0x80000, .len = 0x6, // OK
> + .features = BIT(DPU_DSC_NATIVE_42x_EN), // TODO
> + .sblk = &dsc_sblk_0, // TODO
Yes
> + }, {
> + .name = "dce_0_1", .id = DSC_1, // OK
> + .base = 0x80000, .len = 0x6, // OK
> + .features = BIT(DPU_DSC_NATIVE_42x_EN), // TODO
> + .sblk = &dsc_sblk_1, // TODO
> + },
> +};
> +
> +static const struct dpu_wb_cfg milos_wb[] = {
> + {
> + .name = "wb_2", .id = WB_2, // TODO
> + .base = 0x65000, .len = 0x2c8, // OK
> + .features = WB_SDM845_MASK, // TODO
> + .format_list = wb2_formats_rgb_yuv, // TODO
> + .num_formats = ARRAY_SIZE(wb2_formats_rgb_yuv), // TODO
> + .xin_id = 6, // OK
> + .vbif_idx = VBIF_RT, // TODO
> + .maxlinewidth = 4096, // OK
> + .intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4), // TODO
Yes
> + },
> +};
> +
> +static const struct dpu_cwb_cfg milos_cwb[] = {
> + {
> + .name = "cwb_0", .id = CWB_0,
> + .base = 0x66200, .len = 0x8,
> + },
> +};
> +
> +static const struct dpu_intf_cfg milos_intf[] = {
> + {
> + .name = "intf_0", .id = INTF_0, // OK
> + .base = 0x34000, .len = 0x280, // OK size=0x300?
I think, 0x280 is correct
> + .type = INTF_DP, // OK
> + .controller_id = MSM_DP_CONTROLLER_0, // OK?
> + .prog_fetch_lines_worst_case = 24, // TODO
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 24), // TODO
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 25), // TODO
> + }, {
> + .name = "intf_1", .id = INTF_1, // OK
> + .base = 0x35000, .len = 0x300, // OK size=0x300?
> + .type = INTF_DSI, // OK
> + .controller_id = MSM_DSI_CONTROLLER_0, // OK?
> + .prog_fetch_lines_worst_case = 24, // TODO
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 26), // TODO
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 27), // TODO
> + .intr_tear_rd_ptr = DPU_IRQ_IDX(MDP_INTF1_TEAR_INTR, 2), // TODO
> + }, {
> + .name = "intf_3", .id = INTF_3, // TODO?
> + .base = 0x37000, .len = 0x280, // OK size=0x300?
> + .type = INTF_DP, // OK
> + .controller_id = MSM_DP_CONTROLLER_1, // FIXME, only one DP
> controller?
It should be INTF_NONE / MSM_DP_CONTROLLER_0 for now, it's an MST
counterpart of INTF_0
> + .prog_fetch_lines_worst_case = 24, // TODO
> + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30), // TODO
> + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31), // TODO
> + },
> +};
> +
> +static const struct dpu_perf_cfg milos_perf_data = {
> + .max_bw_low = 7100000,
> + .max_bw_high = 9800000,
> + .min_core_ib = 2500000,
> + .min_llcc_ib = 0,
> + .min_dram_ib = 1600000,
> + .min_prefill_lines = 35, // TODO
40
> + /* FIXME: lut tables */
> + .danger_lut_tbl = {0x3ffff, 0x3ffff, 0x0}, // TODO
> + .safe_lut_tbl = {0xfe00, 0xfe00, 0xffff}, // TODO
0xff00, 0xfff0, 0xfff
> + .qos_lut_tbl = { // TODO
> + {.nentry = ARRAY_SIZE(sc7180_qos_linear),
> + .entries = sc7180_qos_linear
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
> + .entries = sc7180_qos_macrotile
> + },
> + {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
> + .entries = sc7180_qos_nrt
> + },
> + /* TODO: macrotile-qseed is different from macrotile */
> + },
> + .cdp_cfg = { // TODO
> + {.rd_enable = 1, .wr_enable = 1},
> + {.rd_enable = 1, .wr_enable = 0}
> + },
> + .clk_inefficiency_factor = 105, // TODO
> + .bw_inefficiency_factor = 120, // TODO
> +};
> +
> +static const struct dpu_mdss_version milos_mdss_ver = {
> + .core_major_ver = 10,
> + .core_minor_ver = 2,
> +};
> +
> +const struct dpu_mdss_cfg dpu_milos_cfg = {
> + .mdss_ver = &milos_mdss_ver,
> + .caps = &milos_dpu_caps,
> + .mdp = &milos_mdp,
> + .cdm = &dpu_cdm_5_x,
> + .ctl_count = ARRAY_SIZE(milos_ctl),
> + .ctl = milos_ctl,
> + .sspp_count = ARRAY_SIZE(milos_sspp),
> + .sspp = milos_sspp,
> + .mixer_count = ARRAY_SIZE(milos_lm),
> + .mixer = milos_lm,
> + .dspp_count = ARRAY_SIZE(milos_dspp),
> + .dspp = milos_dspp,
> + .pingpong_count = ARRAY_SIZE(milos_pp),
> + .pingpong = milos_pp,
> + .dsc_count = ARRAY_SIZE(milos_dsc),
> + .dsc = milos_dsc,
> + .merge_3d_count = ARRAY_SIZE(milos_merge_3d),
> + .merge_3d = milos_merge_3d,
> + .wb_count = ARRAY_SIZE(milos_wb),
> + .wb = milos_wb,
> + .cwb_count = ARRAY_SIZE(milos_cwb),
> + .cwb = milos_cwb,
> + .intf_count = ARRAY_SIZE(milos_intf),
> + .intf = milos_intf,
> + .vbif_count = ARRAY_SIZE(milos_vbif),
> + .vbif = milos_vbif,
> + .perf = &milos_perf_data,
> +};
> +
> +#endif
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> index 9f8d1bba9139..4d5b57d6295f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> @@ -555,6 +555,26 @@ static const struct dpu_vbif_cfg sdm845_vbif[] = {
> },
> };
>
> +static const struct dpu_vbif_cfg milos_vbif[] = {
> + {
> + .name = "vbif_rt", .id = VBIF_RT, // OK
> + .base = 0, .len = 0x1074, // OK
> + .features = BIT(DPU_VBIF_QOS_REMAP), // TODO
> + .xin_halt_timeout = 0x4000, // TODO
> + .qos_rp_remap_size = 0x40, // TODO
> + .qos_rt_tbl = { // TODO
> + .npriority_lvl = ARRAY_SIZE(sm8650_rt_pri_lvl),
> + .priority_lvl = sm8650_rt_pri_lvl,
> + },
> + .qos_nrt_tbl = { // TODO
> + .npriority_lvl = ARRAY_SIZE(sdm845_nrt_pri_lvl),
> + .priority_lvl = sdm845_nrt_pri_lvl,
> + },
> + .memtype_count = 16, // OK
> + .memtype = {3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3}, // OK?
Yep
> + },
> +};
> +
> static const struct dpu_vbif_cfg sm8550_vbif[] = {
> {
> .name = "vbif_rt", .id = VBIF_RT,
> @@ -725,4 +745,6 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
> #include "catalog/dpu_9_2_x1e80100.h"
>
> #include "catalog/dpu_10_0_sm8650.h"
> +#include "catalog/dpu_10_2_milos.h"
> +
> #include "catalog/dpu_12_0_sm8750.h"
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> index f0768f54e9b3..1f6b14f1c4d6 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h
> @@ -749,6 +749,7 @@ struct dpu_mdss_cfg {
> const struct dpu_format_extended *vig_formats;
> };
>
> +extern const struct dpu_mdss_cfg dpu_milos_cfg;
> extern const struct dpu_mdss_cfg dpu_msm8917_cfg;
> extern const struct dpu_mdss_cfg dpu_msm8937_cfg;
> extern const struct dpu_mdss_cfg dpu_msm8953_cfg;
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> index 4e5a8ecd31f7..7afd7dc7a0b4 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
> @@ -1505,6 +1505,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
> };
>
> static const struct of_device_id dpu_dt_match[] = {
> + { .compatible = "qcom,milos-dpu", .data = &dpu_milos_cfg, },
> { .compatible = "qcom,msm8917-mdp5", .data = &dpu_msm8917_cfg, },
> { .compatible = "qcom,msm8937-mdp5", .data = &dpu_msm8937_cfg, },
> { .compatible = "qcom,msm8953-mdp5", .data = &dpu_msm8953_cfg, },
>
> --
> 2.52.0
>
--
With best wishes
Dmitry
