On Wed, Sep 10, 2025 at 08:08:20PM -0700, Paul Sajna wrote:
> From: Amir Dahan <system64f...@protonmail.com>
>
> Added panel driver used by LG G7 ThinQ (judyln)
>
> Signed-off-by: Amir Dahan <system64f...@protonmail.com>
> Signed-off-by: Paul Sajna <sajatt...@postmarketos.org>
> Co-authored-by: Paul Sajna <sajatt...@postmarketos.org>
> ---
> drivers/gpu/drm/panel/Kconfig | 14 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-lg-sw49410.c | 513
> +++++++++++++++++++++++++++++++
> 3 files changed, 528 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index
> cfebb08e8a62680a14a500d28decfafc2daf743a..48144848c8d3282d231d7495d694381456dde63b
> 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -406,6 +406,20 @@ config DRM_PANEL_LG_SW43408
> pixel. It provides a MIPI DSI interface to the host and has a
> built-in LED backlight.
>
> +config DRM_PANEL_LG_SW49410
> + tristate "LG SW49410 panel"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + select DRM_DISPLAY_DSC_HELPER
> + select DRM_DISPLAY_DP_HELPER
You should not need DP helper for DSI panel
> + select DRM_DISPLAY_HELPER
> + help
> + Say Y here if you want to enable support for LG sw49410 panel.
> + The panel has a 1440x3120@60Hz resolution and uses 24 bit RGB per
> + pixel. It provides a MIPI DSI interface to the host and has a
> + built-in LED backlight.
> +
> config DRM_PANEL_MAGNACHIP_D53E6EA8966
> tristate "Magnachip D53E6EA8966 DSI panel"
> depends on OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index
> 714cbac830e3f0be3659f1907c5dbacef863bbd8..f7f6d232ad9c7163f328d94f4461fcb3379f998b
> 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_DRM_PANEL_LINCOLNTECH_LCD197) +=
> panel-lincolntech-lcd197.o
> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
> +obj-$(CONFIG_DRM_PANEL_LG_SW49410) += panel-lg-sw49410.o
> obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) +=
> panel-magnachip-d53e6ea8966.o
> obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3051D) += panel-newvision-nv3051d.o
> diff --git a/drivers/gpu/drm/panel/panel-lg-sw49410.c
> b/drivers/gpu/drm/panel/panel-lg-sw49410.c
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..1243577f9280ecf3e906d2ad001c6c313b3af495
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-lg-sw49410.c
> @@ -0,0 +1,513 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Generated with linux-mdss-dsi-panel-driver-generator from vendor device
> tree:
> +// Copyright (c) 2025, The Linux Foundation. All rights reserved.
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +#include <drm/display/drm_dsc.h>
> +#include <drm/display/drm_dsc_helper.h>
> +
> +struct sw49410_panel {
> + struct drm_panel panel;
> + struct mipi_dsi_device *dsi;
> + struct drm_dsc_config dsc;
> + struct gpio_desc *reset_gpio;
> +};
> +
> +static inline
> +struct sw49410_panel *to_sw49410_panel(struct drm_panel *panel)
> +{
> + return container_of(panel, struct sw49410_panel, panel);
> +}
> +
> +static void sw49410_panel_reset(struct sw49410_panel *ctx)
> +{
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(10000, 11000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + usleep_range(10000, 11000);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + usleep_range(10000, 11000);
> +}
> +
> +static int sw49410_panel_on(struct sw49410_panel *ctx)
> +{
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> +
> + ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
> +
> + mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + mipi_dsi_dcs_set_page_address(ctx->dsi, 0x0000, 0x0c2f);
Please rewrite this function to only use _multi() functions. Don't use
functions that take mipi_dsi_device directly. If anything is missing,
please add new wrappers.
> + mipi_dsi_dcs_set_display_brightness(ctx->dsi, 0x00ff);
> + mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MIPI_DCS_WRITE_CONTROL_DISPLAY,
> + 0x2c);
[..]
> +
> +static int sw49410_panel_prepare(struct drm_panel *panel)
> +{
> + struct sw49410_panel *ctx = to_sw49410_panel(panel);
> + struct device *dev = &ctx->dsi->dev;
> + struct drm_dsc_picture_parameter_set pps;
> + int ret;
> +
> + sw49410_panel_reset(ctx);
> +
> + ret = sw49410_panel_on(ctx);
> + if (ret < 0) {
> + dev_err(dev, "Failed to initialize panel: %d\n", ret);
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + return ret;
> + }
> +
> + drm_dsc_pps_payload_pack(&pps, &ctx->dsc);
> +
> + ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps);
mipi_dsi_picture_parameter_set_multi(), move this call and the next ones
to sw49410_panel_on().
> + if (ret < 0) {
> + dev_err(panel->dev, "failed to transmit PPS: %d\n", ret);
> + return ret;
> + }
> +
> + ret = mipi_dsi_compression_mode(ctx->dsi, true);
mipi_dsi_compression_mode_multi
> + if (ret < 0) {
> + dev_err(dev, "failed to enable compression mode: %d\n", ret);
> + return ret;
> + }
> +
> + msleep(28);
mipi_dsi_msleep
> +
> + return 0;
> +}
> +
--
With best wishes
Dmitry
