Document Sharp LQ079L1SX01 panel found in Xiaomi Mi Pad. Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com> --- .../display/panel/sharp,lq079l1sx01.yaml | 99 +++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml new file mode 100644 index 000000000000..1dbb4a4bb772 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamo...@gmail.com> + +description: + This panel requires a dual-channel DSI host to operate and it supports + only left-right split mode, where each channel drives the left or right + half of the screen and only video mode. + + Each of the DSI channels controls a separate DSI peripheral. + The peripheral driven by the first link (DSI-LINK1), left one, is + considered the primary peripheral and controls the device. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + const: sharp,lq079l1sx01 + + reg: + maxItems: 1 + + avdd-supply: + description: regulator that supplies the analog voltage + + vddio-supply: + description: regulator that supplies the I/O voltage + + vsp-supply: + description: positive boost supply regulator + + vsn-supply: + description: negative boost supply regulator + + reset-gpios: + maxItems: 1 + + backlight: true + ports: true + +required: + - compatible + - reg + - avdd-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,lq079l1sx01"; + reg = <0>; + + reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; + + avdd-supply = <&avdd_lcd>; + vddio-supply = <&vdd_lcd_io>; + vsp-supply = <&vsp_5v5_lcd>; + vsn-supply = <&vsn_5v5_lcd>; + + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; +... -- 2.48.1
