On Fri, Aug 08, 2025 at 04:06:16PM +0800, Shengjiu Wang wrote:
> The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the
> Audio Subsystem to the HDMI TX Controller.
>
> Shrink register map size of hdmi_pvi to avoid overlapped hdmi_pai device.
>
> Signed-off-by: Shengjiu Wang <shengjiu.w...@nxp.com>

Reviewed-by: Frank Li <frank...@nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 28 ++++++++++++++++++++++-
>  1 file changed, 27 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi 
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 841d155685ee..00d8474bd1b1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -2066,7 +2066,7 @@ irqsteer_hdmi: interrupt-controller@32fc2000 {
>
>                       hdmi_pvi: display-bridge@32fc4000 {
>                               compatible = "fsl,imx8mp-hdmi-pvi";
> -                             reg = <0x32fc4000 0x1000>;
> +                             reg = <0x32fc4000 0x800>;
>                               interrupt-parent = <&irqsteer_hdmi>;
>                               interrupts = <12>;
>                               power-domains = <&hdmi_blk_ctrl 
> IMX8MP_HDMIBLK_PD_PVI>;
> @@ -2092,6 +2092,24 @@ pvi_to_hdmi_tx: endpoint {
>                               };
>                       };
>
> +                     hdmi_pai: audio-bridge@32fc4800 {
> +                             compatible = "fsl,imx8mp-hdmi-pai";
> +                             reg = <0x32fc4800 0x800>;
> +                             interrupt-parent = <&irqsteer_hdmi>;
> +                             interrupts = <14>;
> +                             clocks = <&clk IMX8MP_CLK_HDMI_APB>;
> +                             clock-names = "apb";
> +                             power-domains = <&hdmi_blk_ctrl 
> IMX8MP_HDMIBLK_PD_PAI>;
> +                             status = "disabled";
> +
> +                             port {
> +
> +                                     pai_to_hdmi_tx: endpoint {
> +                                             remote-endpoint = 
> <&hdmi_tx_from_pai>;
> +                                     };
> +                             };
> +                     };
> +
>                       lcdif3: display-controller@32fc6000 {
>                               compatible = "fsl,imx8mp-lcdif";
>                               reg = <0x32fc6000 0x1000>;
> @@ -2143,6 +2161,14 @@ port@1 {
>                                               reg = <1>;
>                                               /* Point endpoint to the HDMI 
> connector */
>                                       };
> +
> +                                     port@2 {
> +                                             reg = <2>;
> +
> +                                             hdmi_tx_from_pai: endpoint {
> +                                                     remote-endpoint = 
> <&pai_to_hdmi_tx>;
> +                                             };
> +                                     };
>                               };
>                       };
>
> --
> 2.34.1
>

Reply via email to