[PATCH 5/9] phy: mediatek: phy-mtk-mipi-dsi-mt8173: convert from round_rate() to determine_rate()

[Brian Masney]

The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.

Signed-off-by: Brian Masney <bmas...@redhat.com>
---
 drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c 
b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c
index 
673cb0f08959e0e4f2b1ade2ebaf796e8b76f8bc..438ff3605d90121b7bfe02b3ddca8194437ed9ba
 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi-mt8173.c
@@ -237,16 +237,18 @@ static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw)
        mtk_phy_clear_bits(base + MIPITX_DSI_PLL_CON0, RG_DSI_MPPLL_DIV_MSK);
 }
 
-static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
-                                      unsigned long *prate)
+static int mtk_mipi_tx_pll_determine_rate(struct clk_hw *hw,
+                                         struct clk_rate_request *req)
 {
-       return clamp_val(rate, 50000000, 1250000000);
+       req->rate = clamp_val(req->rate, 50000000, 1250000000);
+
+       return 0;
 }
 
 static const struct clk_ops mtk_mipi_tx_pll_ops = {
        .prepare = mtk_mipi_tx_pll_prepare,
        .unprepare = mtk_mipi_tx_pll_unprepare,
-       .round_rate = mtk_mipi_tx_pll_round_rate,
+       .determine_rate = mtk_mipi_tx_pll_determine_rate,
        .set_rate = mtk_mipi_tx_pll_set_rate,
        .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
 };

-- 
2.50.0