The era of hand-rolled HIWORD_UPDATE macros is over, at least for those
drivers that use constant masks.
Switch to the new HWORD_UPDATE macro in bitfield.h, which has error
checking. Instead of redefining the driver's HIWORD_UPDATE macro in this
case, replace the two only instances of it with the new macro, as I
could test that they result in an equivalent value.
Signed-off-by: Nicolas Frattaroli <nicolas.frattar...@collabora.com>
---
drivers/mmc/host/dw_mmc-rockchip.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c
b/drivers/mmc/host/dw_mmc-rockchip.c
index
baa23b51773127b4137f472581259b61649273a5..9e3d17becf65ffb60fe3d32d2cdec341fbd30b1e
100644
--- a/drivers/mmc/host/dw_mmc-rockchip.c
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -5,6 +5,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/of_address.h>
@@ -24,8 +25,6 @@
#define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
#define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
#define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60
-#define HIWORD_UPDATE(val, mask, shift) \
- ((val) << (shift) | (mask) << ((shift) + 16))
static const unsigned int freqs[] = { 100000, 200000, 300000, 400000 };
@@ -148,9 +147,9 @@ static int rockchip_mmc_set_internal_phase(struct dw_mci
*host, bool sample, int
raw_value |= nineties;
if (sample)
- mci_writel(host, TIMING_CON1, HIWORD_UPDATE(raw_value, 0x07ff,
1));
+ mci_writel(host, TIMING_CON1, HWORD_UPDATE(GENMASK(11, 1),
raw_value));
else
- mci_writel(host, TIMING_CON0, HIWORD_UPDATE(raw_value, 0x07ff,
1));
+ mci_writel(host, TIMING_CON0, HWORD_UPDATE(GENMASK(11, 1),
raw_value));
dev_dbg(host->dev, "set %s_phase(%d) delay_nums=%u actual_degrees=%d\n",
sample ? "sample" : "drv", degrees, delay_num,
--
2.49.0
