[PATCH AUTOSEL 6.12 156/486] drm/amd/display: remove minimum Dispclk and apply oem panel timing.

[Sasha Levin]

From: Charlene Liu <charlene....@amd.com>

[ Upstream commit 756e58e83e89d372b94269c0cde61fe55da76947 ]

[why & how]
1. apply oem panel timing (not only on OLED)
2. remove MIN_DPP_DISP_CLK request in driver.

This fix will apply for dcn31x but not
sync with DML's output.

Reviewed-by: Ovidiu Bunea <ovidiu.bu...@amd.com>
Signed-off-by: Charlene Liu <charlene....@amd.com>
Signed-off-by: Tom Chung <chiahsuan.ch...@amd.com>
Tested-by: Daniel Wheeler <daniel.whee...@amd.com>
Signed-off-by: Alex Deucher <alexander.deuc...@amd.com>
Signed-off-by: Sasha Levin <sas...@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 2 --
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 2 --
 drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c      | 3 ++-
 3 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c 
b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
index 827b24b3442ad..e4d22f74f9869 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c
@@ -194,8 +194,6 @@ static void dcn315_update_clocks(struct clk_mgr 
*clk_mgr_base,
        // workaround: Limit dppclk to 100Mhz to avoid lower eDP panel switch 
to plus 4K monitor underflow.
        if (new_clocks->dppclk_khz < MIN_DPP_DISP_CLK)
                new_clocks->dppclk_khz = MIN_DPP_DISP_CLK;
-       if (new_clocks->dispclk_khz < MIN_DPP_DISP_CLK)
-               new_clocks->dispclk_khz = MIN_DPP_DISP_CLK;
 
        if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, 
clk_mgr->base.clks.dppclk_khz)) {
                if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c 
b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c
index 37c39756fece4..49efea0c8fcff 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c
@@ -201,8 +201,6 @@ static void dcn316_update_clocks(struct clk_mgr 
*clk_mgr_base,
        // workaround: Limit dppclk to 100Mhz to avoid lower eDP panel switch 
to plus 4K monitor underflow.
        if (new_clocks->dppclk_khz < 100000)
                new_clocks->dppclk_khz = 100000;
-       if (new_clocks->dispclk_khz < 100000)
-               new_clocks->dispclk_khz = 100000;
 
        if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, 
clk_mgr->base.clks.dppclk_khz)) {
                if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c 
b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
index 4fbed0298adfa..297f313794e49 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
@@ -1064,7 +1064,8 @@ void dce110_edp_backlight_control(
                        DC_LOG_DC("edp_receiver_ready_T9 skipped\n");
        }
 
-       if (!enable && link->dpcd_sink_ext_caps.bits.oled) {
+       if (!enable) {
+               /*follow oem panel config's requirement*/
                pre_T11_delay += link->panel_config.pps.extra_pre_t11_ms;
                msleep(pre_T11_delay);
        }
-- 
2.39.5