Provide tests to verify drm_atomic_helper_connector_hdmi_check() helper
fallback behavior when using YUV420 output format.
Signed-off-by: Cristian Ciocaltea <cristian.ciocal...@collabora.com>
---
drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 146 +++++++++++++++++++++
1 file changed, 146 insertions(+)
diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
index
faec7aa6fd55faae2207072b67ef3d372dc1695e..e7e55db0add5b28ba7114d45a272d98daed2513c
100644
--- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
@@ -1334,6 +1334,76 @@ static void
drm_test_check_max_tmds_rate_bpc_fallback_rgb(struct kunit *test)
drm_modeset_acquire_fini(&ctx);
}
+/*
+ * Test that if:
+ * - We have an HDMI connector and a display supporting both RGB and YUV420
+ * - The chosen mode can be supported in YUV420 output format only
+ * - The chosen mode has a TMDS character rate higher than the display
+ * supports in YUV420/12bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ * supports in YUV420/10bpc.
+ *
+ * Then we will pick the latter, and the computed TMDS character rate
+ * will be equal to 1.25 * 0.5 times the mode pixel clock.
+ */
+static void drm_test_check_max_tmds_rate_bpc_fallback_yuv420(struct kunit
*test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *yuv420_only_mode;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_kunit_helper_connector_hdmi_init_with_edid_funcs(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV420),
+ 12,
+ &dummy_connector_hdmi_funcs,
+
test_edid_hdmi_1080p_rgb_yuv_4k_yuv420_dc_max_200mhz);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ conn = &priv->connector;
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+ KUNIT_ASSERT_TRUE(test, conn->ycbcr_420_allowed);
+
+ yuv420_only_mode = drm_kunit_display_mode_from_cea_vic(test, drm, 95);
+ KUNIT_ASSERT_NOT_NULL(test, yuv420_only_mode);
+ KUNIT_ASSERT_TRUE(test, drm_mode_is_420_only(info, yuv420_only_mode));
+
+ rate = drm_hdmi_compute_mode_clock(yuv420_only_mode, 12,
HDMI_COLORSPACE_YUV420);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(yuv420_only_mode, 10,
HDMI_COLORSPACE_YUV420);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ ret = drm_kunit_helper_try_enable_crtc_connector(test, drm,
+ crtc, conn,
+ yuv420_only_mode,
+ &ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 10);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format,
HDMI_COLORSPACE_YUV420);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.tmds_char_rate,
yuv420_only_mode->clock * 625);
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+}
+
/*
* Test that if:
* - We have an HDMI connector supporting both RGB and YUV422 and up to
@@ -1407,6 +1477,80 @@ static void
drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv422(struct kunit
drm_modeset_acquire_fini(&ctx);
}
+/*
+ * Test that if:
+ * - We have an HDMI connector supporting both RGB and YUV420 and up to
+ * 12 bpc
+ * - The chosen mode has a TMDS character rate higher than the display
+ * supports in RGB/10bpc but lower than the display supports in
+ * RGB/8bpc
+ * - The chosen mode has a TMDS character rate lower than the display
+ * supports in YUV420/12bpc.
+ *
+ * Then we will prefer to keep the RGB format with a lower bpc over
+ * picking YUV420.
+ */
+static void drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv420(struct
kunit *test)
+{
+ struct drm_atomic_helper_connector_hdmi_priv *priv;
+ struct drm_modeset_acquire_ctx ctx;
+ struct drm_connector_state *conn_state;
+ struct drm_display_info *info;
+ struct drm_display_mode *preferred;
+ unsigned long long rate;
+ struct drm_connector *conn;
+ struct drm_device *drm;
+ struct drm_crtc *crtc;
+ int ret;
+
+ priv = drm_kunit_helper_connector_hdmi_init_with_edid_funcs(test,
+ BIT(HDMI_COLORSPACE_RGB) |
+ BIT(HDMI_COLORSPACE_YUV420),
+ 12,
+ &dummy_connector_hdmi_funcs,
+ test_edid_hdmi_4k_rgb_yuv420_dc_max_340mhz);
+ KUNIT_ASSERT_NOT_NULL(test, priv);
+
+ drm = &priv->drm;
+ crtc = priv->crtc;
+ conn = &priv->connector;
+ info = &conn->display_info;
+ KUNIT_ASSERT_TRUE(test, info->is_hdmi);
+ KUNIT_ASSERT_GT(test, info->max_tmds_clock, 0);
+ KUNIT_ASSERT_TRUE(test, conn->ycbcr_420_allowed);
+
+ preferred = find_preferred_mode(conn);
+ KUNIT_ASSERT_NOT_NULL(test, preferred);
+ KUNIT_ASSERT_FALSE(test, preferred->flags & DRM_MODE_FLAG_DBLCLK);
+ KUNIT_ASSERT_TRUE(test, drm_mode_is_420_also(info, preferred));
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 8, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 10, HDMI_COLORSPACE_RGB);
+ KUNIT_ASSERT_GT(test, rate, info->max_tmds_clock * 1000);
+
+ rate = drm_hdmi_compute_mode_clock(preferred, 12,
HDMI_COLORSPACE_YUV420);
+ KUNIT_ASSERT_LT(test, rate, info->max_tmds_clock * 1000);
+
+ drm_modeset_acquire_init(&ctx, 0);
+
+ ret = drm_kunit_helper_try_enable_crtc_connector(test, drm,
+ crtc, conn,
+ preferred,
+ &ctx);
+ KUNIT_EXPECT_EQ(test, ret, 0);
+
+ conn_state = conn->state;
+ KUNIT_ASSERT_NOT_NULL(test, conn_state);
+
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
+ KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format,
HDMI_COLORSPACE_RGB);
+
+ drm_modeset_drop_locks(&ctx);
+ drm_modeset_acquire_fini(&ctx);
+}
+
/*
* Test that if a driver and screen supports RGB and YUV formats, and we
* try to set the VIC 1 mode, we end up with 8bpc RGB even if we could
@@ -1804,7 +1948,9 @@ static struct kunit_case
drm_atomic_helper_connector_hdmi_check_tests[] = {
KUNIT_CASE(drm_test_check_disable_connector),
KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback_rgb),
+ KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback_yuv420),
KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv422),
+ KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback_ignore_yuv420),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
KUNIT_CASE(drm_test_check_output_bpc_dvi),
--
2.49.0
