From: Casey Connolly <casey.conno...@linaro.org>
We never properly supported this panel and always used the wrong init
sequence. Drop support so we can move it to it's own proper driver.
Fixes: 5933baa36e26 ("drm/panel/samsung-sofef00: Add panel for OnePlus 6/T
devices")
Signed-off-by: Casey Connolly <casey.conno...@linaro.org>
Signed-off-by: David Heidelberg <da...@ixit.cz>
---
drivers/gpu/drm/panel/panel-samsung-sofef00.c | 34 ++-------------------------
1 file changed, 2 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-sofef00.c
b/drivers/gpu/drm/panel/panel-samsung-sofef00.c
index
04ce925b3d9dbd91841f4b4e4a12320eac8e03af..49cfa84b34f0ca75394b74b5765a0931d9fefba0
100644
--- a/drivers/gpu/drm/panel/panel-samsung-sofef00.c
+++ b/drivers/gpu/drm/panel/panel-samsung-sofef00.c
@@ -22,7 +22,6 @@ struct sofef00_panel {
struct mipi_dsi_device *dsi;
struct regulator *supply;
struct gpio_desc *reset_gpio;
- const struct drm_display_mode *mode;
};
static inline
@@ -159,26 +158,11 @@ static const struct drm_display_mode enchilada_panel_mode
= {
.height_mm = 145,
};
-static const struct drm_display_mode fajita_panel_mode = {
- .clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
- .hdisplay = 1080,
- .hsync_start = 1080 + 72,
- .hsync_end = 1080 + 72 + 16,
- .htotal = 1080 + 72 + 16 + 36,
- .vdisplay = 2340,
- .vsync_start = 2340 + 32,
- .vsync_end = 2340 + 32 + 4,
- .vtotal = 2340 + 32 + 4 + 18,
- .width_mm = 68,
- .height_mm = 145,
-};
-
static int sofef00_panel_get_modes(struct drm_panel *panel, struct
drm_connector *connector)
{
struct drm_display_mode *mode;
- struct sofef00_panel *ctx = to_sofef00_panel(panel);
- mode = drm_mode_duplicate(connector->dev, ctx->mode);
+ mode = drm_mode_duplicate(connector->dev, &enchilada_panel_mode);
if (!mode)
return -ENOMEM;
@@ -239,13 +223,6 @@ static int sofef00_panel_probe(struct mipi_dsi_device *dsi)
if (!ctx)
return -ENOMEM;
- ctx->mode = of_device_get_match_data(dev);
-
- if (!ctx->mode) {
- dev_err(dev, "Missing device mode\n");
- return -ENODEV;
- }
-
ctx->supply = devm_regulator_get(dev, "vddio");
if (IS_ERR(ctx->supply))
return dev_err_probe(dev, PTR_ERR(ctx->supply),
@@ -295,14 +272,7 @@ static void sofef00_panel_remove(struct mipi_dsi_device
*dsi)
}
static const struct of_device_id sofef00_panel_of_match[] = {
- { // OnePlus 6 / enchilada
- .compatible = "samsung,sofef00",
- .data = &enchilada_panel_mode,
- },
- { // OnePlus 6T / fajita
- .compatible = "samsung,s6e3fc2x01",
- .data = &fajita_panel_mode,
- },
+ { .compatible = "samsung,sofef00" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sofef00_panel_of_match);
---
base-commit: bc8aa6cdadcc00862f2b5720e5de2e17f696a081
change-id: 20250419-drop-s6e3fc2x01-support-d060a14a4791
Best regards,
--
David Heidelberg <da...@ixit.cz>
