Convert ldb.txt to yaml format. Additional changes - fix clock-names order to match existed dts file. - remove lvds-panel and iomuxc-gpr node in examples. - fsl,imx6q-ldb fail back to fsl,imx53-ldb. - add fsl,panel property to match existed dts.
Signed-off-by: Frank Li <frank...@nxp.com> --- change from v1 to v2 - use oneof in clock-names. imx6dl use imx6q-ldb comaptible string, but the clock-names is the same as imx53. To reduce dts impact, use oneof to allow two group clock-names list - fix typo pannel --- .../bindings/display/imx/fsl,imx6q-ldb.yaml | 194 ++++++++++++++++++ .../devicetree/bindings/display/imx/ldb.txt | 146 ------------- 2 files changed, 194 insertions(+), 146 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml delete mode 100644 Documentation/devicetree/bindings/display/imx/ldb.txt diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml new file mode 100644 index 0000000000000..0f0a229956b78 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale LVDS Display Bridge (ldb) + +description: + The LVDS Display Bridge device tree node contains up to two lvds-channel + nodes describing each of the two LVDS encoder channels of the bridge. + +maintainers: + - Frank Li <frank...@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx53-ldb + - items: + - enum: + - fsl,imx6q-ldb + - const: fsl,imx53-ldb + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + gpr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle points to the iomuxc-gpr region containing the LVDS + control register. + + clocks: + minItems: 6 + maxItems: 8 + + clock-names: + oneOf: + - items: + - const: di0_pll + - const: di1_pll + - const: di0_sel + - const: di1_sel + - const: di0 + - const: di1 + - items: + - const: di0_pll + - const: di1_pll + - const: di0_sel + - const: di1_sel + - const: di2_sel + - const: di3_sel + - const: di0 + - const: di1 + + fsl,dual-channel: + $ref: /schemas/types.yaml#/definitions/flag + description: + if it exists, only LVDS channel 0 should + be configured - one input will be distributed on both outputs in dual + channel mode + +patternProperties: + '^lvds-channel@[0-1]$': + type: object + description: + Each LVDS Channel has to contain either an of graph link to a panel device node + or a display-timings node that describes the video timings for the connected + LVDS display as well as the fsl,data-mapping and fsl,data-width properties. + + properties: + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + display-timings: + $ref: /schemas/display/panel/display-timings.yaml# + + fsl,data-mapping: + enum: + - spwg + - jeida + + fsl,data-width: + $ref: /schemas/types.yaml#/definitions/uint32 + description: should be <18> or <24> + enum: + - 18 + - 24 + + fsl,panel: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to lcd panel + + patternProperties: + '^port@[0-4]$': + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + On i.MX5, the internal two-input-multiplexer is used. Due to hardware + limitations, only one input port (port@[0,1]) can be used for each channel + (lvds-channel@[0,1], respectively). + On i.MX6, there should be four input ports (port@[0-3]) that correspond + to the four LVDS multiplexer inputs. + A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected + to a panel input port. Optionally, the output port can be left out if + display-timings are used instead. + + additionalProperties: false + +required: + - compatible + - gpr + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + ldb@53fa8008 { + compatible = "fsl,imx53-ldb"; + reg = <0x53fa8008 0x4>; + #address-cells = <1>; + #size-cells = <0>; + gpr = <&gpr>; + clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", + "di0", "di1"; + + /* Using an of-graph endpoint link to connect the panel */ + lvds-channel@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + endpoint { + remote-endpoint = <&ipu_di0_lvds0>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + + /* Using display-timings and fsl,data-mapping/width instead */ + lvds-channel@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + fsl,data-mapping = "spwg"; + fsl,data-width = <24>; + + display-timings {/* ... */ + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&ipu_di1_lvds1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt deleted file mode 100644 index 03653a291b549..0000000000000 --- a/Documentation/devicetree/bindings/display/imx/ldb.txt +++ /dev/null @@ -1,146 +0,0 @@ -Device-Tree bindings for LVDS Display Bridge (ldb) - -LVDS Display Bridge -=================== - -The LVDS Display Bridge device tree node contains up to two lvds-channel -nodes describing each of the two LVDS encoder channels of the bridge. - -Required properties: - - #address-cells : should be <1> - - #size-cells : should be <0> - - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb". - Both LDB versions are similar, but i.MX6 has an additional - multiplexer in the front to select any of the four IPU display - interfaces as input for each LVDS channel. - - gpr : should be <&gpr> on i.MX53 and i.MX6q. - The phandle points to the iomuxc-gpr region containing the LVDS - control register. -- clocks, clock-names : phandles to the LDB divider and selector clocks and to - the display interface selector clocks, as described in - Documentation/devicetree/bindings/clock/clock-bindings.txt - The following clocks are expected on i.MX53: - "di0_pll" - LDB LVDS channel 0 mux - "di1_pll" - LDB LVDS channel 1 mux - "di0" - LDB LVDS channel 0 gate - "di1" - LDB LVDS channel 1 gate - "di0_sel" - IPU1 DI0 mux - "di1_sel" - IPU1 DI1 mux - On i.MX6q the following additional clocks are needed: - "di2_sel" - IPU2 DI0 mux - "di3_sel" - IPU2 DI1 mux - The needed clock numbers for each are documented in - Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in - Documentation/devicetree/bindings/clock/imx6q-clock.yaml. - -Optional properties: - - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q - - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53, - not used on i.MX6q - - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should - be configured - one input will be distributed on both outputs in dual - channel mode - -LVDS Channel -============ - -Each LVDS Channel has to contain either an of graph link to a panel device node -or a display-timings node that describes the video timings for the connected -LVDS display as well as the fsl,data-mapping and fsl,data-width properties. - -Required properties: - - reg : should be <0> or <1> - - port: Input and output port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/graph.txt. - On i.MX5, the internal two-input-multiplexer is used. Due to hardware - limitations, only one input port (port@[0,1]) can be used for each channel - (lvds-channel@[0,1], respectively). - On i.MX6, there should be four input ports (port@[0-3]) that correspond - to the four LVDS multiplexer inputs. - A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected - to a panel input port. Optionally, the output port can be left out if - display-timings are used instead. - -Optional properties (required if display-timings are used): - - display-timings : A node that describes the display timings as defined in - Documentation/devicetree/bindings/display/panel/display-timing.txt. - - fsl,data-mapping : should be "spwg" or "jeida" - This describes how the color bits are laid out in the - serialized LVDS signal. - - fsl,data-width : should be <18> or <24> - -example: - -gpr: iomuxc-gpr@53fa8000 { - /* ... */ -}; - -ldb: ldb@53fa8008 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx53-ldb"; - gpr = <&gpr>; - clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, - <&clks IMX5_CLK_LDB_DI1_SEL>, - <&clks IMX5_CLK_IPU_DI0_SEL>, - <&clks IMX5_CLK_IPU_DI1_SEL>, - <&clks IMX5_CLK_LDB_DI0_GATE>, - <&clks IMX5_CLK_LDB_DI1_GATE>; - clock-names = "di0_pll", "di1_pll", - "di0_sel", "di1_sel", - "di0", "di1"; - - /* Using an of-graph endpoint link to connect the panel */ - lvds-channel@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - port@0 { - reg = <0>; - - lvds0_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; - }; - }; - - port@2 { - reg = <2>; - - lvds0_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - - /* Using display-timings and fsl,data-mapping/width instead */ - lvds-channel@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - - display-timings { - /* ... */ - }; - - port@1 { - reg = <1>; - - lvds1_in: endpoint { - remote-endpoint = <&ipu_di1_lvds1>; - }; - }; - }; -}; - -panel: lvds-panel { - /* ... */ - - port { - panel_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; -}; -- 2.34.1
