Add the dsi-lanes property to specify the number of DSI lanes used by the
panel. This allows configuring the panel for either two, three or four
lanes.
Signed-off-by: Kory Maincent <kory.mainc...@bootlin.com>
---
Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git
a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index
baf5dfe5f5ebdd92f460a78d0e56e1b45e7dd323..e36550616f6aac86c79832a48132ce8c11ebcf7a
100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -27,6 +27,11 @@ properties:
reg:
maxItems: 1
+ dsi-lanes:
+ description: Number of DSI lanes to be used must be <2>, <3> or <4>
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 3, 4]
+
backlight: true
power-supply: true
reset-gpios: true
--
2.34.1
