The Visionox G2647FB105 is a 6.47 inch 1080x2340 MIPI-DSI CMD mode AMOLED panel used in: - Xiaomi Mi Note 10 / CC9 Pro (sm7150-xiaomi-tucana) - Xiaomi Mi Note 10 Lite (sm7150-xiaomi-toco)
Add a dt-binding for it. Signed-off-by: Alexander Baransky <sanyapilot...@gmail.com> --- .../display/panel/visionox,g2647fb105.yaml | 79 +++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml diff --git a/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml new file mode 100644 index 000000000000..49dcd9b8f670 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,g2647fb105.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,g2647fb105.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox G2647FB105 6.47" 1080x2340 MIPI-DSI Panel + +maintainers: + - Alexander Baransky <sanyapilot...@gmail.com> + +description: + The Visionox G2647FB105 is a 6.47 inch 1080x2340 MIPI-DSI CMD mode OLED panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,g2647fb105 + + reg: + maxItems: 1 + + vdd3p3-supply: + description: 3.3V source voltage rail + + vddio-supply: + description: I/O source voltage rail + + vsn-supply: + description: Negative source voltage rail + + vsp-supply: + description: Positive source voltage rail + + reset-gpios: true + port: true + +required: + - compatible + - reg + - vdd3p3-supply + - vddio-supply + - vsn-supply + - vsp-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "visionox,g2647fb105"; + reg = <0>; + + vdd3p3-supply = <&vreg_l7c_3p0>; + vddio-supply = <&vreg_l13a_1p8>; + vsn-supply = <&vreg_ibb>; + vsp-supply = <&vreg_lab>; + + reset-gpios = <&pm6150l_gpios 9 GPIO_ACTIVE_LOW>; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... -- 2.49.0
