[PATCH 07/46] panel/ronbo-rb070d30: Use refcounted allocation in place of devm_kzalloc()

[Anusha Srivatsa]

Move to using the new API devm_drm_panel_alloc() to allocate the
panel.

Signed-off-by: Anusha Srivatsa <asriv...@redhat.com>
---
 drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c 
b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
index 
2ef5ea5eaeeb2062372c594d077bd070975119ed..ad35d0fb0a16787ffb87c365c9939c78ff42d67a
 100644
--- a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
+++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
@@ -143,9 +143,11 @@ static int rb070d30_panel_dsi_probe(struct mipi_dsi_device 
*dsi)
        struct rb070d30_panel *ctx;
        int ret;
 
-       ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
-       if (!ctx)
-               return -ENOMEM;
+       ctx = devm_drm_panel_alloc(&dsi->dev, struct rb070d30_panel, panel,
+                                  &rb070d30_panel_funcs,
+                                  DRM_MODE_CONNECTOR_DSI);
+       if (IS_ERR(ctx))
+               return PTR_ERR(ctx);
 
        ctx->supply = devm_regulator_get(&dsi->dev, "vcc-lcd");
        if (IS_ERR(ctx->supply))
@@ -154,9 +156,6 @@ static int rb070d30_panel_dsi_probe(struct mipi_dsi_device 
*dsi)
        mipi_dsi_set_drvdata(dsi, ctx);
        ctx->dsi = dsi;
 
-       drm_panel_init(&ctx->panel, &dsi->dev, &rb070d30_panel_funcs,
-                      DRM_MODE_CONNECTOR_DSI);
-
        ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
        if (IS_ERR(ctx->gpios.reset)) {
                dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");

-- 
2.48.1