* li...@treblig.org (li...@treblig.org) wrote:
> From: "Dr. David Alan Gilbert" <li...@treblig.org>
>
> The pcf50633 was used as part of the OpenMoko devices but
> the support for its main chip was recently removed in:
> commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
>
> See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
>
> Remove it.
>
> Signed-off-by: Dr. David Alan Gilbert <li...@treblig.org>
Has anyone got this input patch lined up?
I think most of the other parts are there; the rtc I see in next.
Then once those go there is a core.h that needs nuking.
Dave
> ---
> drivers/input/misc/Kconfig | 7 --
> drivers/input/misc/Makefile | 1 -
> drivers/input/misc/pcf50633-input.c | 113 ----------------------------
> 3 files changed, 121 deletions(-)
> delete mode 100644 drivers/input/misc/pcf50633-input.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 13d135257e06..62819144bd8c 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -584,13 +584,6 @@ config INPUT_PALMAS_PWRBUTTON
> To compile this driver as a module, choose M here. The module will
> be called palmas_pwrbutton.
>
> -config INPUT_PCF50633_PMU
> - tristate "PCF50633 PMU events"
> - depends on MFD_PCF50633
> - help
> - Say Y to include support for delivering PMU events via input
> - layer on NXP PCF50633.
> -
> config INPUT_PCF8574
> tristate "PCF8574 Keypad input device"
> depends on I2C
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 6d91804d0a6f..d468c8140b93 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -59,7 +59,6 @@ obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) +=
> mc13783-pwrbutton.o
> obj-$(CONFIG_INPUT_MMA8450) += mma8450.o
> obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON) += palmas-pwrbutton.o
> obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o
> -obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
> obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o
> obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
> obj-$(CONFIG_INPUT_PM8941_PWRKEY) += pm8941-pwrkey.o
> diff --git a/drivers/input/misc/pcf50633-input.c
> b/drivers/input/misc/pcf50633-input.c
> deleted file mode 100644
> index 6d046e236ba6..000000000000
> --- a/drivers/input/misc/pcf50633-input.c
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/* NXP PCF50633 Input Driver
> - *
> - * (C) 2006-2008 by Openmoko, Inc.
> - * Author: Balaji Rao <balajir...@openmoko.org>
> - * All rights reserved.
> - *
> - * Broken down from monstrous PCF50633 driver mainly by
> - * Harald Welte, Andy Green and Werner Almesberger
> - */
> -
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/device.h>
> -#include <linux/platform_device.h>
> -#include <linux/input.h>
> -#include <linux/slab.h>
> -
> -#include <linux/mfd/pcf50633/core.h>
> -
> -#define PCF50633_OOCSTAT_ONKEY 0x01
> -#define PCF50633_REG_OOCSTAT 0x12
> -#define PCF50633_REG_OOCMODE 0x10
> -
> -struct pcf50633_input {
> - struct pcf50633 *pcf;
> - struct input_dev *input_dev;
> -};
> -
> -static void
> -pcf50633_input_irq(int irq, void *data)
> -{
> - struct pcf50633_input *input;
> - int onkey_released;
> -
> - input = data;
> -
> - /* We report only one event depending on the key press status */
> - onkey_released = pcf50633_reg_read(input->pcf, PCF50633_REG_OOCSTAT)
> - & PCF50633_OOCSTAT_ONKEY;
> -
> - if (irq == PCF50633_IRQ_ONKEYF && !onkey_released)
> - input_report_key(input->input_dev, KEY_POWER, 1);
> - else if (irq == PCF50633_IRQ_ONKEYR && onkey_released)
> - input_report_key(input->input_dev, KEY_POWER, 0);
> -
> - input_sync(input->input_dev);
> -}
> -
> -static int pcf50633_input_probe(struct platform_device *pdev)
> -{
> - struct pcf50633_input *input;
> - struct input_dev *input_dev;
> - int ret;
> -
> -
> - input = kzalloc(sizeof(*input), GFP_KERNEL);
> - if (!input)
> - return -ENOMEM;
> -
> - input_dev = input_allocate_device();
> - if (!input_dev) {
> - kfree(input);
> - return -ENOMEM;
> - }
> -
> - platform_set_drvdata(pdev, input);
> - input->pcf = dev_to_pcf50633(pdev->dev.parent);
> - input->input_dev = input_dev;
> -
> - input_dev->name = "PCF50633 PMU events";
> - input_dev->id.bustype = BUS_I2C;
> - input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR);
> - set_bit(KEY_POWER, input_dev->keybit);
> -
> - ret = input_register_device(input_dev);
> - if (ret) {
> - input_free_device(input_dev);
> - kfree(input);
> - return ret;
> - }
> - pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYR,
> - pcf50633_input_irq, input);
> - pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYF,
> - pcf50633_input_irq, input);
> -
> - return 0;
> -}
> -
> -static void pcf50633_input_remove(struct platform_device *pdev)
> -{
> - struct pcf50633_input *input = platform_get_drvdata(pdev);
> -
> - pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYR);
> - pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYF);
> -
> - input_unregister_device(input->input_dev);
> - kfree(input);
> -}
> -
> -static struct platform_driver pcf50633_input_driver = {
> - .driver = {
> - .name = "pcf50633-input",
> - },
> - .probe = pcf50633_input_probe,
> - .remove = pcf50633_input_remove,
> -};
> -module_platform_driver(pcf50633_input_driver);
> -
> -MODULE_AUTHOR("Balaji Rao <balajir...@openmoko.org>");
> -MODULE_DESCRIPTION("PCF50633 input driver");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:pcf50633-input");
> --
> 2.48.1
>
--
-----Open up your eyes, open up your mind, open up your code -------
/ Dr. David Alan Gilbert | Running GNU/Linux | Happy \
\ dave @ treblig.org | | In Hex /
\ _________________________|_____ http://www.treblig.org |_______/
