On Mon, Mar 10, 2025 at 10:09:53PM +1300, Ryan Walklin wrote:
> The Allwinner H616 and variants have a new display engine revision
> (DE33).
> 
> The mixer configuration registers are significantly different to the DE3
> and DE2 revisions, being split into separate top and display blocks,
> therefore a fallback for the mixer compatible is not provided.
> 
> Add a display engine mixer binding for the DE33.
> 
> Signed-off-by: Ryan Walklin <r...@testtoast.com>
> Acked-by: Conor Dooley <conor.doo...@microchip.com>
> Reviewed-by: Chen-Yu Tsai <w...@csie.org>
> 
> ---
> Changelog v2..v3:
> - Separate content into three patches for three separate subsystems
> 
> Changelog v5..v6:
> - increase reg maxItems to 3 and add conditional for h616-de33
> ---
>  .../allwinner,sun8i-a83t-de2-mixer.yaml       | 21 ++++++++++++++++++-
>  1 file changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git 
> a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
>  
> b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
> index b75c1ec686ad..274f5e632733 100644
> --- 
> a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
> +++ 
> b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
> @@ -24,9 +24,11 @@ properties:
>        - allwinner,sun50i-a64-de2-mixer-0
>        - allwinner,sun50i-a64-de2-mixer-1
>        - allwinner,sun50i-h6-de3-mixer-0
> +      - allwinner,sun50i-h616-de33-mixer-0
>  
>    reg:
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 3

What's in each region?

>  
>    clocks:
>      items:
> @@ -61,6 +63,23 @@ properties:
>      required:
>        - port@1
>  
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - allwinner,sun50i-h616-de33-mixer-0
> +
> +    then:
> +      properties:
> +        reg:
> +          maxItems: 3
> +
> +    else:
> +      properties:
> +        reg:
> +          maxItems: 1
> +
>  required:
>    - compatible
>    - reg
> -- 
> 2.48.1
> 

Reply via email to