On Tue, 04 Mar 2025 18:15:28 +0800, Liu Ying wrote: > A DPI color encoder, as a simple display bridge, converts input DPI color > coding to output DPI color coding, like Adafruit Kippah DPI hat[1] which > converts input 18-bit pixel data to 24-bit pixel data(with 2 low padding > bits in every color component though). Document the DPI color encoder. > > [1] https://learn.adafruit.com/adafruit-dpi-display-kippah-ttl-tft/downloads > > Signed-off-by: Liu Ying <victor....@nxp.com> > --- > .../display/bridge/simple-bridge.yaml | 89 ++++++++++++++++++- > 1 file changed, 87 insertions(+), 2 deletions(-) >
My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/bridge/simple-bridge.example.dtb: /example-1/bridge: failed to match any schema with compatible: ['dpi-color-enoder'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250304101530.969920-4-victor....@nxp.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
