Chun-Kuang Hu <chunkuang...@kernel.org> 於 2025年3月2日 週日 下午7:29寫道:
>
> Hi, Angelo:
>
> AngeloGioacchino Del Regno <angelogioacchino.delre...@collabora.com> 於
> 2025年2月17日 週一 下午11:49寫道:
> >
> > On some SoCs, like MT8195 and MT8188, the DPI's FIFO controller
> > (afifo) supports outputting either one or two pixels per round
> > regardless of the input being 1T1P or 1T2P.
> >
> > Add a `output_1pixel` member to struct mtk_dpi_conf which, if
> > set, will enable outputting one pixel per clock.
> >
> > In case the input is two pixel per clock (1T2P), the AFIFO HW
> > will automatically (and internally) convert it to 1T1P.
>
> Applied to mediatek-drm-next [1], thanks.
>
> [1] 
> https://web.git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Fix build error then apply. Be care of patch quality.

Regards,
Chun-Kuang.

>
> Regards,
> Chun-Kuang.
>
> >
> > Reviewed-by: CK Hu <ck...@mediatek.com>
> > Signed-off-by: AngeloGioacchino Del Regno 
> > <angelogioacchino.delre...@collabora.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 11 ++++++++++-
> >  1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c 
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 9f83e82437dd..e12dc73ed79c 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -147,6 +147,8 @@ struct mtk_dpi_factor {
> >   * @edge_cfg_in_mmsys: If the edge configuration for DPI's output needs to 
> > be set in MMSYS.
> >   * @clocked_by_hdmi: HDMI IP outputs clock to dpi_pixel_clk input clock, 
> > needed
> >   *                  for DPI registers access.
> > + * @output_1pixel: Enable outputting one pixel per round; if the input is 
> > two pixel per
> > + *                 round, the DPI hardware will internally transform it to 
> > 1T1P.
> >   */
> >  struct mtk_dpi_conf {
> >         const struct mtk_dpi_factor *dpi_factor;
> > @@ -168,6 +170,7 @@ struct mtk_dpi_conf {
> >         u32 pixels_per_iter;
> >         bool edge_cfg_in_mmsys;
> >         bool clocked_by_hdmi;
> > +       bool output_1pixel;
> >  };
> >
> >  static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 
> > mask)
> > @@ -653,7 +656,13 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi 
> > *dpi,
> >         if (dpi->conf->support_direct_pin) {
> >                 mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> >                 mtk_dpi_config_2n_h_fre(dpi);
> > -               mtk_dpi_dual_edge(dpi);
> > +
> > +               /* DPI can connect to either an external bridge or the 
> > internal HDMI encoder */
> > +               if (dpi->conf->output_1pixel)
> > +                       mtk_dpi_mask(dpi, DPI_CON, DPI_OUTPUT_1T1P_EN, 
> > DPI_OUTPUT_1T1P_EN);
> > +               else
> > +                       mtk_dpi_dual_edge(dpi);
> > +
> >                 mtk_dpi_config_disable_edge(dpi);
> >         }
> >         if (dpi->conf->input_2p_en_bit) {
> > --
> > 2.48.1
> >

Reply via email to