On Mon, 24 Feb 2025, Svyatoslav Ryhel wrote:
> Remove platform data and fully relay on OF and device tree
> parsing and binding devices.
>
> Signed-off-by: Svyatoslav Ryhel <clamo...@gmail.com>
> ---
> drivers/iio/light/lm3533-als.c | 40 ++++---
> drivers/leds/leds-lm3533.c | 46 +++++---
> drivers/mfd/lm3533-core.c | 159 ++++++++--------------------
> drivers/video/backlight/lm3533_bl.c | 71 ++++++++++---
> include/linux/mfd/lm3533.h | 35 +-----
> 5 files changed, 164 insertions(+), 187 deletions(-)
>
> diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
> index 99f0b903018c..cb52965e93c6 100644
> --- a/drivers/iio/light/lm3533-als.c
> +++ b/drivers/iio/light/lm3533-als.c
> @@ -16,9 +16,12 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/slab.h>
> #include <linux/uaccess.h>
> +#include <linux/units.h>
>
> #include <linux/mfd/lm3533.h>
>
> @@ -56,6 +59,9 @@ struct lm3533_als {
>
> atomic_t zone;
> struct mutex thresh_mutex;
> +
> + unsigned pwm_mode:1; /* PWM input mode (default analog) */
> + u8 r_select; /* 1 - 127 (ignored in PWM-mode) */
> };
>
>
> @@ -753,18 +759,17 @@ static int lm3533_als_set_resistor(struct lm3533_als
> *als, u8 val)
> return 0;
> }
>
> -static int lm3533_als_setup(struct lm3533_als *als,
> - const struct lm3533_als_platform_data *pdata)
> +static int lm3533_als_setup(struct lm3533_als *als)
> {
> int ret;
>
> - ret = lm3533_als_set_input_mode(als, pdata->pwm_mode);
> + ret = lm3533_als_set_input_mode(als, als->pwm_mode);
> if (ret)
> return ret;
>
> /* ALS input is always high impedance in PWM-mode. */
> - if (!pdata->pwm_mode) {
> - ret = lm3533_als_set_resistor(als, pdata->r_select);
> + if (!als->pwm_mode) {
> + ret = lm3533_als_set_resistor(als, als->r_select);
You're already passing 'als'.
Just teach lm3533_als_set_resistor that 'r_select' is now contained.
> if (ret)
> return ret;
> }
> @@ -828,22 +833,16 @@ static const struct iio_info lm3533_als_info = {
>
> static int lm3533_als_probe(struct platform_device *pdev)
> {
> - const struct lm3533_als_platform_data *pdata;
> struct lm3533 *lm3533;
> struct lm3533_als *als;
> struct iio_dev *indio_dev;
> + u32 val;
Value of what, potatoes?
> int ret;
>
> lm3533 = dev_get_drvdata(pdev->dev.parent);
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*als));
> if (!indio_dev)
> return -ENOMEM;
> @@ -864,13 +863,21 @@ static int lm3533_als_probe(struct platform_device
> *pdev)
>
> platform_set_drvdata(pdev, indio_dev);
>
> + val = 200 * KILO; /* 200kOhm */
Better to #define magic numbers; DEFAULT_{DESCRIPTION}_OHMS
> + device_property_read_u32(&pdev->dev, "ti,resistor-value-ohm", &val);
> +
> + /* Convert resitance into R_ALS value with 2v / 10uA * R */
Because ...
> + als->r_select = DIV_ROUND_UP(2 * MICRO, 10 * val);
> +
> + als->pwm_mode = device_property_read_bool(&pdev->dev, "ti,pwm-mode");
> +
> if (als->irq) {
> ret = lm3533_als_setup_irq(als, indio_dev);
> if (ret)
> return ret;
> }
>
> - ret = lm3533_als_setup(als, pdata);
> + ret = lm3533_als_setup(als);
> if (ret)
> goto err_free_irq;
>
> @@ -907,9 +914,16 @@ static void lm3533_als_remove(struct platform_device
> *pdev)
> free_irq(als->irq, indio_dev);
> }
>
> +static const struct of_device_id lm3533_als_match_table[] = {
> + { .compatible = "ti,lm3533-als" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_als_match_table);
> +
> static struct platform_driver lm3533_als_driver = {
> .driver = {
> .name = "lm3533-als",
> + .of_match_table = lm3533_als_match_table,
> },
> .probe = lm3533_als_probe,
> .remove = lm3533_als_remove,
> diff --git a/drivers/leds/leds-lm3533.c b/drivers/leds/leds-lm3533.c
> index 45795f2a1042..6e661a2a540f 100644
> --- a/drivers/leds/leds-lm3533.c
> +++ b/drivers/leds/leds-lm3533.c
> @@ -10,8 +10,10 @@
> #include <linux/module.h>
> #include <linux/leds.h>
> #include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/mutex.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/slab.h>
>
> #include <linux/mfd/lm3533.h>
> @@ -48,6 +50,9 @@ struct lm3533_led {
>
> struct mutex mutex;
> unsigned long flags;
> +
> + u16 max_current; /* 5000 - 29800 uA (800 uA step) */
> + u8 pwm; /* 0 - 0x3f */
This comment doesn't add anything.
> };
>
>
> @@ -632,23 +637,22 @@ static const struct attribute_group
> *lm3533_led_attribute_groups[] = {
> NULL
> };
>
> -static int lm3533_led_setup(struct lm3533_led *led,
> - struct lm3533_led_platform_data *pdata)
> +static int lm3533_led_setup(struct lm3533_led *led)
> {
> int ret;
>
> - ret = lm3533_ctrlbank_set_max_current(&led->cb, pdata->max_current);
> + ret = lm3533_ctrlbank_set_max_current(&led->cb, led->max_current);
Why not make max_current and attribute of lm3533_ctrlbank and drop the
redundant parameter?
> if (ret)
> return ret;
>
> - return lm3533_ctrlbank_set_pwm(&led->cb, pdata->pwm);
> + return lm3533_ctrlbank_set_pwm(&led->cb, led->pwm);
As above.
> }
>
> static int lm3533_led_probe(struct platform_device *pdev)
> {
> struct lm3533 *lm3533;
> - struct lm3533_led_platform_data *pdata;
> struct lm3533_led *led;
> + u32 val;
> int ret;
>
> dev_dbg(&pdev->dev, "%s\n", __func__);
> @@ -657,12 +661,6 @@ static int lm3533_led_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> if (pdev->id < 0 || pdev->id >= LM3533_LVCTRLBANK_COUNT) {
> dev_err(&pdev->dev, "illegal LED id %d\n", pdev->id);
> return -EINVAL;
> @@ -673,8 +671,11 @@ static int lm3533_led_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> led->lm3533 = lm3533;
> - led->cdev.name = pdata->name;
> - led->cdev.default_trigger = pdata->default_trigger;
> + led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d",
> + pdev->name, pdev->id);
> + led->cdev.default_trigger = "none";
> + device_property_read_string(&pdev->dev, "linux,default-trigger",
> + &led->cdev.default_trigger);
> led->cdev.brightness_set_blocking = lm3533_led_set;
> led->cdev.brightness_get = lm3533_led_get;
> led->cdev.blink_set = lm3533_led_blink_set;
> @@ -702,7 +703,17 @@ static int lm3533_led_probe(struct platform_device *pdev)
>
> led->cb.dev = led->cdev.dev;
>
> - ret = lm3533_led_setup(led, pdata);
> + /* 5000 - 29800 uA (800 uA step) */
> + val = 5000;
> + device_property_read_u32(&pdev->dev, "ti,max-current-microamp", &val);
> + led->max_current = val;
Why not just use 'led->max_current' from the offset and delete 'val'?
> +
> + /* 0 - 0x3f */
How does this improve readability? Why would use this info?
> + val = 0;
> + device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &val);
> + led->pwm = val;
> +
> + ret = lm3533_led_setup(led);
> if (ret)
> goto err_deregister;
>
> @@ -739,9 +750,16 @@ static void lm3533_led_shutdown(struct platform_device
> *pdev)
> lm3533_led_set(&led->cdev, LED_OFF); /* disable blink */
> }
>
> +static const struct of_device_id lm3533_led_match_table[] = {
> + { .compatible = "ti,lm3533-leds" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_led_match_table);
> +
> static struct platform_driver lm3533_led_driver = {
> .driver = {
> .name = "lm3533-leds",
> + .of_match_table = lm3533_led_match_table,
> },
> .probe = lm3533_led_probe,
> .remove = lm3533_led_remove,
> diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
> index 0a2409d00b2e..e1b8fe136af9 100644
> --- a/drivers/mfd/lm3533-core.c
> +++ b/drivers/mfd/lm3533-core.c
> @@ -14,10 +14,13 @@
> #include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/mfd/core.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/property.h>
> #include <linux/regmap.h>
> #include <linux/seq_file.h>
> #include <linux/slab.h>
> #include <linux/uaccess.h>
> +#include <linux/units.h>
>
> #include <linux/mfd/lm3533.h>
>
> @@ -42,41 +45,41 @@
>
> #define LM3533_REG_MAX 0xb2
>
> -
> -static struct mfd_cell lm3533_als_devs[] = {
> +static struct mfd_cell lm3533_child_devices[] = {
Drop the child_ part.
> {
> .name = "lm3533-als",
> .id = -1,
> + .of_compatible = "ti,lm3533-als",
> },
> -};
> -
> -static struct mfd_cell lm3533_bl_devs[] = {
> {
> .name = "lm3533-backlight",
> .id = 0,
> + .of_compatible = "ti,lm3533-backlight",
> },
> {
> .name = "lm3533-backlight",
> .id = 1,
> + .of_compatible = "ti,lm3533-backlight",
> },
> -};
> -
> -static struct mfd_cell lm3533_led_devs[] = {
> {
> .name = "lm3533-leds",
> .id = 0,
Do you know if these are actually used for anything?
Any reason to not just use PLATFORM_DEVID_AUTO?
> + .of_compatible = "ti,lm3533-leds",
> },
> {
> .name = "lm3533-leds",
> .id = 1,
> + .of_compatible = "ti,lm3533-leds",
> },
> {
> .name = "lm3533-leds",
> .id = 2,
> + .of_compatible = "ti,lm3533-leds",
> },
> {
> .name = "lm3533-leds",
> .id = 3,
> + .of_compatible = "ti,lm3533-leds",
> },
> };
>
> @@ -376,136 +379,60 @@ static struct attribute_group lm3533_attribute_group =
> {
> .attrs = lm3533_attributes
> };
>
> -static int lm3533_device_als_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int ret;
> -
> - if (!pdata->als)
> - return 0;
> -
> - lm3533_als_devs[0].platform_data = pdata->als;
> - lm3533_als_devs[0].pdata_size = sizeof(*pdata->als);
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL,
> - 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add ALS device\n");
> - return ret;
> - }
> -
> - lm3533->have_als = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_bl_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int i;
> - int ret;
> -
> - if (!pdata->backlights || pdata->num_backlights == 0)
> - return 0;
> -
> - if (pdata->num_backlights > ARRAY_SIZE(lm3533_bl_devs))
> - pdata->num_backlights = ARRAY_SIZE(lm3533_bl_devs);
> -
> - for (i = 0; i < pdata->num_backlights; ++i) {
> - lm3533_bl_devs[i].platform_data = &pdata->backlights[i];
> - lm3533_bl_devs[i].pdata_size = sizeof(pdata->backlights[i]);
> - }
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs,
> - pdata->num_backlights, NULL, 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add backlight devices\n");
> - return ret;
> - }
> -
> - lm3533->have_backlights = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_led_init(struct lm3533 *lm3533)
> -{
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> - int i;
> - int ret;
> -
> - if (!pdata->leds || pdata->num_leds == 0)
> - return 0;
> -
> - if (pdata->num_leds > ARRAY_SIZE(lm3533_led_devs))
> - pdata->num_leds = ARRAY_SIZE(lm3533_led_devs);
> -
> - for (i = 0; i < pdata->num_leds; ++i) {
> - lm3533_led_devs[i].platform_data = &pdata->leds[i];
> - lm3533_led_devs[i].pdata_size = sizeof(pdata->leds[i]);
> - }
> -
> - ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs,
> - pdata->num_leds, NULL, 0, NULL);
> - if (ret) {
> - dev_err(lm3533->dev, "failed to add LED devices\n");
> - return ret;
> - }
> -
> - lm3533->have_leds = 1;
> -
> - return 0;
> -}
> -
> -static int lm3533_device_setup(struct lm3533 *lm3533,
> - struct lm3533_platform_data *pdata)
> +static int lm3533_device_setup(struct lm3533 *lm3533)
> {
> int ret;
>
> - ret = lm3533_set_boost_freq(lm3533, pdata->boost_freq);
> + ret = lm3533_set_boost_freq(lm3533, lm3533->boost_freq);
Same comments as before.
Teach lm3533_set_boost_freq() that 'boost_freq' is contained in 'lm3533'.
> if (ret)
> return ret;
>
> - return lm3533_set_boost_ovp(lm3533, pdata->boost_ovp);
> + return lm3533_set_boost_ovp(lm3533, lm3533->boost_ovp);
> }
>
> static int lm3533_device_init(struct lm3533 *lm3533)
> {
> - struct lm3533_platform_data *pdata = dev_get_platdata(lm3533->dev);
> + u32 val;
'uV' and 'hz' could be easier to follow.
> int ret;
>
> - dev_dbg(lm3533->dev, "%s\n", __func__);
> + lm3533->hwen = devm_gpiod_get(lm3533->dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(lm3533->hwen))
> + return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
> + "failed to request HWEN GPIO\n");
>
> - if (!pdata) {
> - dev_err(lm3533->dev, "no platform data\n");
> - return -EINVAL;
> - }
> + val = 16 * MICRO; /* 16V */
> + device_property_read_u32(lm3533->dev, "ti,boost-ovp-microvolt", &val);
>
> - lm3533->hwen = devm_gpiod_get(lm3533->dev, NULL, GPIOD_OUT_LOW);
> - if (IS_ERR(lm3533->hwen))
> - return dev_err_probe(lm3533->dev, PTR_ERR(lm3533->hwen),
> "failed to request HWEN GPIO\n");
> - gpiod_set_consumer_name(lm3533->hwen, "lm3533-hwen");
> + /* boost_ovp is defined in microvolts, convert to enum value */
> + lm3533->boost_ovp = val / (8 * MICRO) - 2;
Wait, what. Why?
Converting a useful microvolt value to an arbitrary enum sounds fragile.
> +
> + val = 500 * KILO; /* 500kHz */
> + device_property_read_u32(lm3533->dev, "ti,boost-freq-hz", &val);
> +
> + /* boost_freq is defined in Hz, convert to enum value */
> + lm3533->boost_freq = val / (500 * KILO) - 1;
>
> lm3533_enable(lm3533);
>
> - ret = lm3533_device_setup(lm3533, pdata);
> + ret = lm3533_device_setup(lm3533);
> if (ret)
> goto err_disable;
>
> - lm3533_device_als_init(lm3533);
> - lm3533_device_bl_init(lm3533);
> - lm3533_device_led_init(lm3533);
> + ret = devm_mfd_add_devices(lm3533->dev, 0, lm3533_child_devices,
> + ARRAY_SIZE(lm3533_child_devices), NULL, 0,
> NULL);
> + if (ret) {
> + dev_err(lm3533->dev, "failed to add MFD devices: %d\n", ret);
"child devices" or "sub-devices".
> + goto err_disable;
> + }
>
> ret = sysfs_create_group(&lm3533->dev->kobj, &lm3533_attribute_group);
> if (ret < 0) {
> dev_err(lm3533->dev, "failed to create sysfs attributes\n");
> - goto err_unregister;
> + goto err_disable;
> }
>
> return 0;
>
> -err_unregister:
> - mfd_remove_devices(lm3533->dev);
> err_disable:
> lm3533_disable(lm3533);
>
> @@ -517,8 +444,6 @@ static void lm3533_device_exit(struct lm3533 *lm3533)
> dev_dbg(lm3533->dev, "%s\n", __func__);
>
> sysfs_remove_group(&lm3533->dev->kobj, &lm3533_attribute_group);
> -
> - mfd_remove_devices(lm3533->dev);
> lm3533_disable(lm3533);
> }
>
> @@ -591,6 +516,9 @@ static int lm3533_i2c_probe(struct i2c_client *i2c)
> lm3533->dev = &i2c->dev;
> lm3533->irq = i2c->irq;
>
> + i2c->dev.coherent_dma_mask = 0;
> + i2c->dev.dma_mask = &i2c->dev.coherent_dma_mask;
Why are you manually doing this?
The core should take care of this for you:
drivers/mfd/mfd-core.c: pdev->dev.dma_mask = parent->dma_mask;
drivers/mfd/mfd-core.c: pdev->dev.coherent_dma_mask = parent->coherent_dma_mask;
> +
> return lm3533_device_init(lm3533);
> }
>
> @@ -603,6 +531,12 @@ static void lm3533_i2c_remove(struct i2c_client *i2c)
> lm3533_device_exit(lm3533);
> }
>
> +static const struct of_device_id lm3533_match_table[] = {
> + { .compatible = "ti,lm3533" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_match_table);
> +
> static const struct i2c_device_id lm3533_i2c_ids[] = {
> { "lm3533" },
> { }
> @@ -612,6 +546,7 @@ MODULE_DEVICE_TABLE(i2c, lm3533_i2c_ids);
> static struct i2c_driver lm3533_i2c_driver = {
> .driver = {
> .name = "lm3533",
> + .of_match_table = lm3533_match_table,
> },
> .id_table = lm3533_i2c_ids,
> .probe = lm3533_i2c_probe,
> diff --git a/drivers/video/backlight/lm3533_bl.c
> b/drivers/video/backlight/lm3533_bl.c
> index babfd3ceec86..0827a5e98dbb 100644
> --- a/drivers/video/backlight/lm3533_bl.c
> +++ b/drivers/video/backlight/lm3533_bl.c
> @@ -9,7 +9,9 @@
>
> #include <linux/module.h>
> #include <linux/init.h>
> +#include <linux/mod_devicetable.h>
> #include <linux/platform_device.h>
> +#include <linux/property.h>
> #include <linux/backlight.h>
> #include <linux/slab.h>
>
> @@ -19,6 +21,7 @@
> #define LM3533_HVCTRLBANK_COUNT 2
> #define LM3533_BL_MAX_BRIGHTNESS 255
>
> +#define LM3533_REG_OUTPUT_CONF1 0x10
> #define LM3533_REG_CTRLBANK_AB_BCONF 0x1a
>
>
> @@ -27,6 +30,11 @@ struct lm3533_bl {
> struct lm3533_ctrlbank cb;
> struct backlight_device *bd;
> int id;
> +
> + u16 max_current; /* 5000 - 29800 uA (800 uA step) */
> + u8 pwm; /* 0 - 0x3f */
Remove or improve this comment.
> + bool linear;
> + bool hvled;
> };
>
>
> @@ -246,25 +254,40 @@ static struct attribute_group lm3533_bl_attribute_group
> = {
> .attrs = lm3533_bl_attributes
> };
>
> -static int lm3533_bl_setup(struct lm3533_bl *bl,
> - struct lm3533_bl_platform_data *pdata)
> +static int lm3533_bl_setup(struct lm3533_bl *bl)
> {
> + int id = lm3533_bl_get_ctrlbank_id(bl);
> int ret;
>
> - ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current);
> + if (bl->linear) {
> + ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF,
> + BIT(2 * id + 1), BIT(2 * id + 1));
These need to be defined as SHIFT values or whatever they are.
> + if (ret)
> + return ret;
> + }
> +
> + if (bl->hvled) {
> + ret = lm3533_update(bl->lm3533, LM3533_REG_OUTPUT_CONF1,
> + id | id << 1, BIT(0) | BIT(1));
> + if (ret)
> + return ret;
> + }
> +
> + ret = lm3533_ctrlbank_set_max_current(&bl->cb, bl->max_current);
> if (ret)
> return ret;
>
> - return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm);
> + return lm3533_ctrlbank_set_pwm(&bl->cb, bl->pwm);
> }
>
> static int lm3533_bl_probe(struct platform_device *pdev)
> {
> struct lm3533 *lm3533;
> - struct lm3533_bl_platform_data *pdata;
> struct lm3533_bl *bl;
> struct backlight_device *bd;
> struct backlight_properties props;
> + char *name;
> + u32 val;
As above.
> int ret;
>
> dev_dbg(&pdev->dev, "%s\n", __func__);
> @@ -273,12 +296,6 @@ static int lm3533_bl_probe(struct platform_device *pdev)
> if (!lm3533)
> return -EINVAL;
>
> - pdata = dev_get_platdata(&pdev->dev);
> - if (!pdata) {
> - dev_err(&pdev->dev, "no platform data\n");
> - return -EINVAL;
> - }
> -
> if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) {
> dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id);
> return -EINVAL;
> @@ -295,13 +312,15 @@ static int lm3533_bl_probe(struct platform_device *pdev)
> bl->cb.id = lm3533_bl_get_ctrlbank_id(bl);
> bl->cb.dev = NULL; /* until registered */
>
> + name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s-%d", pdev->name,
> pdev->id);
Doesn't platform already provide enumerated names?
> +
> memset(&props, 0, sizeof(props));
> props.type = BACKLIGHT_RAW;
> props.max_brightness = LM3533_BL_MAX_BRIGHTNESS;
> - props.brightness = pdata->default_brightness;
> - bd = devm_backlight_device_register(&pdev->dev, pdata->name,
> - pdev->dev.parent, bl, &lm3533_bl_ops,
> - &props);
> + props.brightness = LM3533_BL_MAX_BRIGHTNESS;
> + device_property_read_u32(&pdev->dev, "default-brightness",
> &props.brightness);
> + bd = devm_backlight_device_register(&pdev->dev, name, pdev->dev.parent,
> + bl, &lm3533_bl_ops, &props);
> if (IS_ERR(bd)) {
> dev_err(&pdev->dev, "failed to register backlight device\n");
> return PTR_ERR(bd);
> @@ -320,7 +339,20 @@ static int lm3533_bl_probe(struct platform_device *pdev)
>
> backlight_update_status(bd);
>
> - ret = lm3533_bl_setup(bl, pdata);
> + /* 5000 - 29800 uA (800 uA step) */
> + val = 5000;
> + device_property_read_u32(&pdev->dev, "ti,max-current-microamp", &val);
> + bl->max_current = val;
> +
> + /* 0 - 0x3f */
> + val = 0;
> + device_property_read_u32(&pdev->dev, "ti,pwm-config-mask", &val);
> + bl->pwm = val;
> +
> + bl->linear = device_property_read_bool(&pdev->dev,
> "ti,linear-mapping-mode");
> + bl->hvled = device_property_read_bool(&pdev->dev,
> "ti,hardware-controlled");
> +
> + ret = lm3533_bl_setup(bl);
> if (ret)
> goto err_sysfs_remove;
>
> @@ -381,10 +413,17 @@ static void lm3533_bl_shutdown(struct platform_device
> *pdev)
> lm3533_ctrlbank_disable(&bl->cb);
> }
>
> +static const struct of_device_id lm3533_bl_match_table[] = {
> + { .compatible = "ti,lm3533-backlight" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lm3533_bl_match_table);
> +
> static struct platform_driver lm3533_bl_driver = {
> .driver = {
> .name = "lm3533-backlight",
> .pm = &lm3533_bl_pm_ops,
> + .of_match_table = lm3533_bl_match_table,
> },
> .probe = lm3533_bl_probe,
> .remove = lm3533_bl_remove,
> diff --git a/include/linux/mfd/lm3533.h b/include/linux/mfd/lm3533.h
> index 69059a7a2ce5..3b28fc0970f6 100644
> --- a/include/linux/mfd/lm3533.h
> +++ b/include/linux/mfd/lm3533.h
> @@ -27,6 +27,9 @@ struct lm3533 {
> struct gpio_desc *hwen;
> int irq;
>
> + u32 boost_ovp;
> + u32 boost_freq;
> +
> unsigned have_als:1;
> unsigned have_backlights:1;
> unsigned have_leds:1;
> @@ -38,25 +41,6 @@ struct lm3533_ctrlbank {
> int id;
> };
>
> -struct lm3533_als_platform_data {
> - unsigned pwm_mode:1; /* PWM input mode (default analog) */
> - u8 r_select; /* 1 - 127 (ignored in PWM-mode) */
> -};
> -
> -struct lm3533_bl_platform_data {
> - char *name;
> - u16 max_current; /* 5000 - 29800 uA (800 uA step) */
> - u8 default_brightness; /* 0 - 255 */
> - u8 pwm; /* 0 - 0x3f */
> -};
> -
> -struct lm3533_led_platform_data {
> - char *name;
> - const char *default_trigger;
> - u16 max_current; /* 5000 - 29800 uA (800 uA step) */
> - u8 pwm; /* 0 - 0x3f */
> -};
> -
> enum lm3533_boost_freq {
> LM3533_BOOST_FREQ_500KHZ,
> LM3533_BOOST_FREQ_1000KHZ,
> @@ -69,19 +53,6 @@ enum lm3533_boost_ovp {
> LM3533_BOOST_OVP_40V,
> };
>
> -struct lm3533_platform_data {
> - enum lm3533_boost_ovp boost_ovp;
> - enum lm3533_boost_freq boost_freq;
> -
> - struct lm3533_als_platform_data *als;
> -
> - struct lm3533_bl_platform_data *backlights;
> - int num_backlights;
> -
> - struct lm3533_led_platform_data *leds;
> - int num_leds;
> -};
> -
> extern int lm3533_ctrlbank_enable(struct lm3533_ctrlbank *cb);
> extern int lm3533_ctrlbank_disable(struct lm3533_ctrlbank *cb);
>
> --
> 2.43.0
>
--
Lee Jones [李琼斯]
