From: Maud Spierings <maudspieri...@gocontroll.com>
The Moduline Display platform is a part of the wider GOcontroll Moduline
ecosystem. These are embedded controllers that focus on modularity with
their swappable IO modules.
The base Moduline Display board includes a board-to-board connector with
various busses to enable adding new display types required by the
application. It includes 2 Moduline IO module slots, a simple mono
codec/amplifier, a four channel adc, 2 CAN busses, an RTC and optional
wifi/bluetooth.
busses to the display adapter include:
- 4 lane LVDS
- 4 lane MIPI-DSI
- 4 lane MIPI-CSI
- HDMI 2.0a
- USB 2.0
- I2S
- I2C
- SPI
Also a couple of GPIO and PWM pins for controlling various ICs on the
display adapter board.
Signed-off-by: Maud Spierings <maudspieri...@gocontroll.com>
---
.../imx8mp-tx8p-ml81-moduline-display-106.dtsi | 530 +++++++++++++++++++++
1 file changed, 530 insertions(+)
diff --git
a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dtsi
b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dtsi
new file mode 100644
index
0000000000000000000000000000000000000000..fa8918e0754be3f3c7fc264d44aa2fc927a36afb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dtsi
@@ -0,0 +1,530 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2025 GOcontroll B.V.
+ * Author: Maud Spierings <maudspieri...@gocontroll.com>
+ */
+
+#include "imx8mp-tx8p-ml81.dtsi"
+
+/ {
+ chassis-type = "embedded";
+ compatible = "gocontroll,moduline-display", "fsl,imx8mp";
+ hardware = "Moduline Display V1.06";
+
+ aliases {
+ ethernet0 = &eqos;
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ spi0 = &ecspi2; /* spidev number compatibility */
+ spi1 = &ecspi1; /* spidev number compatibility */
+ can0 = &flexcan1;
+ can1 = &flexcan2;
+ rtc0 = &rtc_pcf; /* i2c rtc is the main rtc */
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ external-sensor-supply {
+ compatible = "regulator-output";
+ vout-supply = <®_5v0_sensor>;
+ };
+
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can1-stby";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-stby";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_1v8_per: regulator-1v8-per {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8-per";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_1v8>;
+ gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ power-supply = <®_3v3_per>;
+ };
+
+ reg_3v3_per: regulator-3v3-per {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3-per";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ power-supply = <®_6v4>;
+ };
+
+ reg_5v0_sensor: regulator-5v0-sensor {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0-supply-external-sensor";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_5v0_sensor>;
+ gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ power-supply = <®_6v4>;
+ };
+
+ reg_6v4: regulator-6v4 {
+ compatible = "regulator-fixed";
+ regulator-name = "6v4";
+ regulator-min-microvolt = <6400000>;
+ regulator-max-microvolt = <6400000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tas2505-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Speaker", "Speaker External";
+ simple-audio-card,routing =
+ "Speaker", "DAC";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai6>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tas2505>;
+ };
+ };
+
+ wifi_powerseq: wifi-powerseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wl_reg>;
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <500000>;
+ reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <
+ &gpio2 12 GPIO_ACTIVE_LOW
+ &gpio1 11 GPIO_ACTIVE_LOW
+ &gpio1 10 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+
+ /* Module slot 1 */
+ spi@0 {
+ compatible = "gocontroll,moduline-module-slot";
+ reg = <0>;
+ spi-max-frequency = <54000000>;
+ };
+
+ /* Module slot 2 */
+ spi@1 {
+ compatible = "gocontroll,moduline-module-slot";
+ reg = <1>;
+ spi-max-frequency = <54000000>;
+ };
+
+ adc@2 {
+ compatible = "microchip,mcp3004";
+ reg = <2>;
+ spi-max-frequency = <2300000>;
+ vref-supply = <®_vdd_3v3>;
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can2_stby>;
+ status = "okay";
+};
+
+/* I2C2 bus to modules */
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ sda-gpios = <&gpio5 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio5 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ tas2505: tas2505@18 {
+ compatible = "ti,tas2505";
+ reg = <0x18>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tas_reset>;
+ reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+ #sound-dai-cells = <0>;
+
+ dv-supply = <®_1v8_per>;
+ iov-supply = <®_vdd_3v3>;
+ av-supply = <®_1v8_per>;
+
+ clocks = <&clk IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>;
+ clock-names = "mclk";
+ aic32x4-gpio-func= <
+ 0xff
+ 0xff
+ 0xff
+ 0xff
+ 0xff
+ >;
+ };
+
+ rtc_pcf: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ quartz-load-femtofarads = <7000>;
+
+ clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+};
+
+/* tas2505 */
+&sai6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai6>;
+ status = "okay";
+ assigned-clocks = <&clk IMX8MP_CLK_SAI6>;
+ assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <12288000>;
+ fsl,sai-mclk-direction-output;
+};
+
+/* debug/external */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+
+ /* muRata 1YN/1DX */
+ bluetooth {
+ compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt";
+ max-speed = <921600>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt>;
+ device-wakeup-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "host-wakeup";
+ vddio-supply = <®_3v3_per>;
+ vbat-supply = <®_3v3_per>;
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ dr_mode = "peripheral";
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+};
+
+&usdhc2 {
+ max-frequency = <50000000>;
+ assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+ assigned-clock-rates = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ mmc-pwrseq = <&wifi_powerseq>;
+ vmmc-supply = <®_3v3_per>;
+
+ cap-power-off-card;
+ keep-power-in-suspend;
+ non-removable;
+ sd-uhs-sdr25;
+
+ status = "okay";
+
+ /* muRata 1YN/1DX */
+ wifi@1 {
+ compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ brcm,board-type = "GOcontroll,moduline";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wl_int>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_reg_1v8: reg-1v8-grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 /* COM pin 144 */
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_reg_5v0_sensor: reg-5v0-sensorgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 /* COM pin 108 */
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_tas_reset: tasresetgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 /* COM pin 143 */
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 /* COM pin 27 */
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 /* COM pin 34 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 /* COM pin 28 */
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI /* COM pin 46 */
+ MX8MP_DSE_X4
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO /* COM pin 47 */
+ (MX8MP_DSE_X4 | MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK /* COM pin 48 */
+ MX8MP_DSE_X4
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 /* COM pin 51 */
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 /* COM pin 162 */
+ MX8MP_DSE_X1
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 /* COM pin 161 */
+ MX8MP_DSE_X1
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX /* COM pin 81 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX /* COM pin 76 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_flexcan1_reg: flexcan1reggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 /* COM pin 101 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_TXD__CAN2_RX /* COM pin 61 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_UART3_RXD__CAN2_TX /* COM pin 62 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_flexcan2_reg: flexcan2reggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 /* COM pin 44 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL /* COM pin 41 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA /* COM pin 40 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 /* COM pin 41 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 /* COM pin 40 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_MISO__I2C4_SCL /* COM pin 70 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ MX8MP_IOMUXC_ECSPI2_SS0__I2C4_SDA /* COM pin 69 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_MISO__GPIO5_IO12 /* COM pin 70 */
+ (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 /* COM pin 69 */
+ (MX8MP_DSE_X4 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT |
MX8MP_PULL_ENABLE | MX8MP_SION)
+ >;
+ };
+
+ pinctrl_sai6: sai6grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_TXD6__AUDIOMIX_SAI6_TX_SYNC /* COM
pin 95 */
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_RXD4__AUDIOMIX_SAI6_TX_BCLK /* COM
pin 105 */
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_TXD5__AUDIOMIX_SAI6_TX_DATA00 /* COM
pin 110 */
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_TXD7__AUDIOMIX_SAI6_MCLK /* COM pin
96 */
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT)
+ MX8MP_IOMUXC_SAI1_RXD5__AUDIOMIX_SAI6_RX_DATA00 /* COM
pin 106 */
+ (MX8MP_DSE_X6 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT)
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX /* COM pin 60 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX /* COM pin 59 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX /* COM pin 64 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX /* COM pin 63 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS /* COM pin 65 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS /* COM pin 66 */
+ (MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_usdhc2: pinctrlusdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK /* COM pin 57 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD /* COM pin 56 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 /* COM pin 52 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 /* COM pin 53 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 /* COM pin 54 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 /* COM pin 55 */
+ (MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP |
MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B /* COM pin 153 */
+ (MX8MP_DSE_X6 | MX8MP_PULL_UP | MX8MP_HYS_SCHMITT)
+ >;
+ };
+
+ pinctrl_wl_int: wlintgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 /* COM pin 36 */
+ (MX8MP_PULL_UP | MX8MP_HYS_SCHMITT | MX8MP_PULL_ENABLE)
+ >;
+ };
+
+ pinctrl_wl_reg: wlreggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 /* COM pin 15 */
+ MX8MP_DSE_X1
+ >;
+ };
+};
--
2.48.1
