Add support to configurate link rate, lane count, voltage swing and
pre-emphasis with phy_configure(). It is helpful in application scenarios
where analogix controller is mixed with the phy of other vendors.
Signed-off-by: Damon Ding <damon.d...@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
Changes in v2:
- remove needless assignments for phy_configure()
- remove unnecessary changes for phy_power_on()/phy_power_off()
Changes in v4:
- remove unnecessary &phy_configure_opts_dp.lanes assignments in
analogix_dp_set_link_bandwidth()
- remove needless &phy_configure_opts_dp.lanes and
&phy_configure_opts_dp.link_rate assignments in
analogix_dp_set_lane_link_training()
Changes in v5:
- include <drm/drm_print.h> for dev_err()
- use drm_err() instead of dev_err()
Changes in v6:
- Pass 'dp' in drm_...() rather than 'dp->drm_dev'
Changes in v7:
- For the new error logs, use dev_err() as with the other error logs
---
.../drm/bridge/analogix/analogix_dp_core.c | 1 +
.../gpu/drm/bridge/analogix/analogix_dp_reg.c | 52 +++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 174e7011bba9..2c94f77c1d4c 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1683,6 +1683,7 @@ int analogix_dp_resume(struct analogix_dp_device *dp)
if (dp->plat_data->power_on)
dp->plat_data->power_on(dp->plat_data);
+ phy_set_mode(dp->phy, PHY_MODE_DP);
phy_power_on(dp->phy);
analogix_dp_init_dp(dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 3afc73c858c4..38fd8d5014d2 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -11,6 +11,7 @@
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
#include <drm/bridge/analogix_dp.h>
@@ -513,10 +514,24 @@ void analogix_dp_enable_sw_function(struct
analogix_dp_device *dp)
void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
{
u32 reg;
+ int ret;
reg = bwtype;
if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+
+ if (dp->phy) {
+ union phy_configure_opts phy_cfg = {0};
+
+ phy_cfg.dp.link_rate =
+ drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) /
100;
+ phy_cfg.dp.set_rate = true;
+ ret = phy_configure(dp->phy, &phy_cfg);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(dp->dev, "%s: phy_configure() failed: %d\n",
__func__, ret);
+ return;
+ }
+ }
}
void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
@@ -530,9 +545,22 @@ void analogix_dp_get_link_bandwidth(struct
analogix_dp_device *dp, u32 *bwtype)
void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count)
{
u32 reg;
+ int ret;
reg = count;
writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+
+ if (dp->phy) {
+ union phy_configure_opts phy_cfg = {0};
+
+ phy_cfg.dp.lanes = dp->link_train.lane_count;
+ phy_cfg.dp.set_lanes = true;
+ ret = phy_configure(dp->phy, &phy_cfg);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(dp->dev, "%s: phy_configure() failed: %d\n",
__func__, ret);
+ return;
+ }
+ }
}
void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
@@ -546,10 +574,34 @@ void analogix_dp_get_lane_count(struct analogix_dp_device
*dp, u32 *count)
void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp)
{
u8 lane;
+ int ret;
for (lane = 0; lane < dp->link_train.lane_count; lane++)
writel(dp->link_train.training_lane[lane],
dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL + 4 *
lane);
+
+ if (dp->phy) {
+ union phy_configure_opts phy_cfg = {0};
+
+ for (lane = 0; lane < dp->link_train.lane_count; lane++) {
+ u8 training_lane = dp->link_train.training_lane[lane];
+ u8 vs, pe;
+
+ vs = (training_lane & DP_TRAIN_VOLTAGE_SWING_MASK) >>
+ DP_TRAIN_VOLTAGE_SWING_SHIFT;
+ pe = (training_lane & DP_TRAIN_PRE_EMPHASIS_MASK) >>
+ DP_TRAIN_PRE_EMPHASIS_SHIFT;
+ phy_cfg.dp.voltage[lane] = vs;
+ phy_cfg.dp.pre[lane] = pe;
+ }
+
+ phy_cfg.dp.set_voltages = true;
+ ret = phy_configure(dp->phy, &phy_cfg);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(dp->dev, "%s: phy_configure() failed: %d\n",
__func__, ret);
+ return;
+ }
+ }
}
u32 analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, u8 lane)
--
2.34.1
