On Mi, 2025-02-19 at 15:02 +0100, Michal Wilczynski wrote:
> Add reset controller driver for the T-HEAD TH1520 SoC that manages
> hardware reset lines for various subsystems. The driver currently
> implements support for GPU reset control, with infrastructure in place
> to extend support for NPU and Watchdog Timer resets in future updates.
> 
> Signed-off-by: Michal Wilczynski <m.wilczyn...@samsung.com>
> ---
>  MAINTAINERS                  |   1 +
>  drivers/reset/Kconfig        |  10 +++
>  drivers/reset/Makefile       |   1 +
>  drivers/reset/reset-th1520.c | 141 +++++++++++++++++++++++++++++++++++
>  4 files changed, 153 insertions(+)
>  create mode 100644 drivers/reset/reset-th1520.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 819686e98214..e4a0a83b4c11 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20425,6 +20425,7 @@ F:    drivers/mailbox/mailbox-th1520.c
>  F:   drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
>  F:   drivers/pinctrl/pinctrl-th1520.c
>  F:   drivers/pmdomain/thead/
> +F:   drivers/reset/reset-th1520.c
>  F:   include/dt-bindings/clock/thead,th1520-clk-ap.h
>  F:   include/dt-bindings/power/thead,th1520-power.h
>  F:   include/dt-bindings/reset/thead,th1520-reset.h
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 5b3abb6db248..fa0943c3d1de 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -272,6 +272,16 @@ config RESET_SUNXI
>       help
>         This enables the reset driver for Allwinner SoCs.
>  
> +config RESET_TH1520
> +     tristate "T-HEAD 1520 reset controller"
> +     depends on ARCH_THEAD || COMPILE_TEST
> +     select REGMAP_MMIO
> +     help
> +       This driver provides support for the T-HEAD TH1520 SoC reset 
> controller,
> +       which manages hardware reset lines for SoC components such as the GPU.
> +       Enable this option if you need to control hardware resets on 
> TH1520-based
> +       systems.
> +
>  config RESET_TI_SCI
>       tristate "TI System Control Interface (TI-SCI) reset driver"
>       depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 677c4d1e2632..d6c2774407ae 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -35,6 +35,7 @@ obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
>  obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
>  obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
>  obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> +obj-$(CONFIG_RESET_TH1520) += reset-th1520.o
>  obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
>  obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
>  obj-$(CONFIG_RESET_TI_TPS380X) += reset-tps380x.o
> diff --git a/drivers/reset/reset-th1520.c b/drivers/reset/reset-th1520.c
> new file mode 100644
> index 000000000000..d6816c86ba95
> --- /dev/null
> +++ b/drivers/reset/reset-th1520.c
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024 Samsung Electronics Co., Ltd.
> + * Author: Michal Wilczynski <m.wilczyn...@samsung.com>
> + */
> +
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/reset/thead,th1520-reset.h>
> +
> + /* register offset in VOSYS_REGMAP */
> +#define TH1520_GPU_RST_CFG           0x0
> +#define TH1520_GPU_RST_CFG_MASK              GENMASK(1, 0)
> +
> +/* register values */
> +#define TH1520_GPU_SW_GPU_RST                BIT(0)
> +#define TH1520_GPU_SW_CLKGEN_RST     BIT(1)
> +
> +struct th1520_reset_priv {
> +     struct reset_controller_dev rcdev;
> +     struct regmap *map;
> +};
> +
> +struct th1520_reset_map {
> +     u32 bit;
> +     u32 reg;
> +};
> +
> +static const struct th1520_reset_map th1520_resets[] = {
> +     [TH1520_RESET_ID_GPU] = {
> +             .bit = TH1520_GPU_SW_GPU_RST,
> +             .reg = TH1520_GPU_RST_CFG,
> +     },
> +     [TH1520_RESET_ID_GPU_CLKGEN] = {
> +             .bit = TH1520_GPU_SW_CLKGEN_RST,
> +             .reg = TH1520_GPU_RST_CFG,
> +     }

I expect the NPU and WDT resets will be added to this list later?

> +};
> +
> +static inline struct th1520_reset_priv *
> +to_th1520_reset(struct reset_controller_dev *rcdev)
> +{
> +     return container_of(rcdev, struct th1520_reset_priv, rcdev);
> +}
> +
> +static int th1520_reset_assert(struct reset_controller_dev *rcdev,
> +                            unsigned long id)
> +{
> +     struct th1520_reset_priv *priv = to_th1520_reset(rcdev);
> +     const struct th1520_reset_map *reset;
> +
> +     if (id >= ARRAY_SIZE(th1520_resets))
> +             return -EINVAL;

This check is not necessary. The core will have checked this in
of_reset_simple_xlate() before returning the reset control.

> +
> +     reset = &th1520_resets[id];
> +
> +     return regmap_update_bits(priv->map, reset->reg, reset->bit, 0);
> +}
> +
> +static int th1520_reset_deassert(struct reset_controller_dev *rcdev,
> +                              unsigned long id)
> +{
> +     struct th1520_reset_priv *priv = to_th1520_reset(rcdev);
> +     const struct th1520_reset_map *reset;
> +
> +     if (id >= ARRAY_SIZE(th1520_resets))
> +             return -EINVAL;

This check is not necessary.

> +
> +     reset = &th1520_resets[id];
> +
> +     return regmap_update_bits(priv->map, reset->reg, reset->bit,
> +                               reset->bit);
> +}
> +
> +static const struct reset_control_ops th1520_reset_ops = {
> +     .assert = th1520_reset_assert,
> +     .deassert = th1520_reset_deassert,
> +};
> +
> +static const struct regmap_config th1520_reset_regmap_config = {
> +     .reg_bits = 32,
> +     .val_bits = 32,
> +     .reg_stride = 4,
> +     .fast_io = true,
> +};
> +
> +static int th1520_reset_probe(struct platform_device *pdev)
> +{
> +     struct device *dev = &pdev->dev;
> +     struct th1520_reset_priv *priv;
> +     void __iomem *base;
> +     int ret;
> +
> +     priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +     if (!priv)
> +             return -ENOMEM;
> +
> +     base = devm_platform_ioremap_resource(pdev, 0);
> +     if (IS_ERR(base))
> +             return PTR_ERR(base);
> +
> +     priv->map = devm_regmap_init_mmio(dev, base,
> +                                       &th1520_reset_regmap_config);
> +     if (IS_ERR(priv->map))
> +             return PTR_ERR(priv->map);
> +
> +     /* Initialize GPU resets to asserted state */
> +     ret = regmap_update_bits(priv->map, TH1520_GPU_RST_CFG,
> +                              TH1520_GPU_RST_CFG_MASK, 0);
> +     if (ret)
> +             return ret;
> +
> +     priv->rcdev.owner = THIS_MODULE;
> +     priv->rcdev.nr_resets = 2;

Better use ARRAY_SIZE(th1520_resets) here, this will simplify adding
further resets in the future. With that,

Reviewed-by: Philipp Zabel <p.za...@pengutronix.de>

regards
Philipp

Reply via email to