On Fri, Feb 14, 2025 at 02:32:56AM +0200, Dmitry Baryshkov wrote:
> On Fri, Feb 14, 2025 at 01:57:45AM +0200, Laurent Pinchart wrote:
> > Hi Dmitry,
> >
> > Thank you for the patch.
> >
> > On Sun, Feb 09, 2025 at 03:41:18PM +0200, Dmitry Baryshkov wrote:
> > > DRM HDMI Codec framework is useful not only for the HDMI bridges, but
> > > also for the DisplayPort bridges. Add new DRM_BRIDGE_OP_DisplayPort
> > > define in order to distinguish DP bridges. Create HDMI codec device
> > > automatically for DP bridges which have declared audio support.
> > >
> > > Note, unlike HDMI devices, which already have a framework to handle HPD
> > > notifications in a standard way, DP drivers don't (yet?) have such a
> > > framework. As such it is necessary to manually call
> > > drm_connector_hdmi_audio_plugged_notify(). This requirement hopefully
> > > can be lifted later on, if/when DRM framework gets better DisplayPort
> > > ports support in the core layer.
> > >
> > > Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
> > > ---
> > > drivers/gpu/drm/display/drm_bridge_connector.c | 66
> > > ++++++++++++++++++++------
> > > include/drm/drm_bridge.h | 14 +++++-
> > > 2 files changed, 65 insertions(+), 15 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c
> > > b/drivers/gpu/drm/display/drm_bridge_connector.c
> > > index
> > > 30c736fc0067e31a97db242e5b16ea8a5b4cf359..5e031395b801f9a1371dcb4ac09f3da23e4615dd
> > > 100644
> > > --- a/drivers/gpu/drm/display/drm_bridge_connector.c
> > > +++ b/drivers/gpu/drm/display/drm_bridge_connector.c
> > > @@ -98,6 +98,13 @@ struct drm_bridge_connector {
> > > * HDMI connector infrastructure, if any (see &DRM_BRIDGE_OP_HDMI).
> > > */
> > > struct drm_bridge *bridge_hdmi;
> > > + /**
> > > + * @bridge_dp:
> > > + *
> > > + * The bridge in the chain that implements necessary support for the
> > > + * DisplayPort connector infrastructure, if any (see
> > > &DRM_BRIDGE_OP_DisplayPort).
> > > + */
> > > + struct drm_bridge *bridge_dp;
> > > };
> > >
> > > #define to_drm_bridge_connector(x) \
> > > @@ -496,6 +503,25 @@ static const struct drm_connector_hdmi_audio_funcs
> > > drm_bridge_connector_hdmi_aud
> > > .mute_stream = drm_bridge_connector_audio_mute_stream,
> > > };
> > >
> > > +static int drm_bridge_connector_hdmi_audio_init(struct drm_connector
> > > *connector,
> > > + struct drm_bridge *bridge)
> > > +{
> > > + if (!bridge->hdmi_audio_max_i2s_playback_channels &&
> > > + !bridge->hdmi_audio_spdif_playback)
> > > + return 0;
> > > +
> > > + if (!bridge->funcs->hdmi_audio_prepare ||
> > > + !bridge->funcs->hdmi_audio_shutdown)
> > > + return -EINVAL;
> > > +
> > > + return drm_connector_hdmi_audio_init(connector,
> > > + bridge->hdmi_audio_dev,
> > > +
> > > &drm_bridge_connector_hdmi_audio_funcs,
> > > +
> > > bridge->hdmi_audio_max_i2s_playback_channels,
> > > + bridge->hdmi_audio_spdif_playback,
> > > + bridge->hdmi_audio_dai_port);
> > > +}
> > > +
> > > /*
> > > -----------------------------------------------------------------------------
> > > * Bridge Connector Initialisation
> > > */
> > > @@ -564,6 +590,8 @@ struct drm_connector
> > > *drm_bridge_connector_init(struct drm_device *drm,
> > > if (bridge->ops & DRM_BRIDGE_OP_HDMI) {
> > > if (bridge_connector->bridge_hdmi)
> > > return ERR_PTR(-EBUSY);
> > > + if (bridge_connector->bridge_dp)
> > > + return ERR_PTR(-EINVAL);
> > > if (!bridge->funcs->hdmi_write_infoframe ||
> > > !bridge->funcs->hdmi_clear_infoframe)
> > > return ERR_PTR(-EINVAL);
> > > @@ -576,6 +604,16 @@ struct drm_connector
> > > *drm_bridge_connector_init(struct drm_device *drm,
> > > max_bpc = bridge->max_bpc;
> > > }
> > >
> > > + if (bridge->ops & DRM_BRIDGE_OP_DisplayPort) {
> > > + if (bridge_connector->bridge_dp)
> > > + return ERR_PTR(-EBUSY);
> > > + if (bridge_connector->bridge_hdmi)
> > > + return ERR_PTR(-EINVAL);
> > > +
> > > + bridge_connector->bridge_dp = bridge;
> > > +
> > > + }
> > > +
> > > if (!drm_bridge_get_next_bridge(bridge))
> > > connector_type = bridge->type;
> > >
> > > @@ -612,21 +650,21 @@ struct drm_connector
> > > *drm_bridge_connector_init(struct drm_device *drm,
> > > if (ret)
> > > return ERR_PTR(ret);
> > >
> > > - if (bridge->hdmi_audio_max_i2s_playback_channels ||
> > > - bridge->hdmi_audio_spdif_playback) {
> > > - if (!bridge->funcs->hdmi_audio_prepare ||
> > > - !bridge->funcs->hdmi_audio_shutdown)
> > > - return ERR_PTR(-EINVAL);
> > > + ret = drm_bridge_connector_hdmi_audio_init(connector, bridge);
> > > + if (ret)
> > > + return ERR_PTR(ret);
> > > + } else if (bridge_connector->bridge_dp) {
> > > + bridge = bridge_connector->bridge_dp;
> > >
> > > - ret = drm_connector_hdmi_audio_init(connector,
> > > -
> > > bridge->hdmi_audio_dev,
> > > -
> > > &drm_bridge_connector_hdmi_audio_funcs,
> > > -
> > > bridge->hdmi_audio_max_i2s_playback_channels,
> > > -
> > > bridge->hdmi_audio_spdif_playback,
> > > -
> > > bridge->hdmi_audio_dai_port);
> > > - if (ret)
> > > - return ERR_PTR(ret);
> > > - }
> > > + ret = drmm_connector_init(drm, connector,
> > > + &drm_bridge_connector_funcs,
> > > + connector_type, ddc);
> > > + if (ret)
> > > + return ERR_PTR(ret);
> > > +
> > > + ret = drm_bridge_connector_hdmi_audio_init(connector, bridge);
> > > + if (ret)
> > > + return ERR_PTR(ret);
> > > } else {
> > > ret = drmm_connector_init(drm, connector,
> > > &drm_bridge_connector_funcs,
> > > diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
> > > index
> > > 496dbbd2ad7edff7f091adfbe62de1e33ef0cf07..40f37444426b1b8ded25da9ba9e2963f18ad6267
> > > 100644
> > > --- a/include/drm/drm_bridge.h
> > > +++ b/include/drm/drm_bridge.h
> > > @@ -811,9 +811,21 @@ enum drm_bridge_ops {
> > > *
> > > * Note: currently there can be at most one bridge in a chain that sets
> > > * this bit. This is to simplify corresponding glue code in connector
> > > - * drivers.
> > > + * drivers. Having both HDMI and DisplayPort bridges in the same bridge
> > > + * chain is also not allowed.
> > > */
> > > DRM_BRIDGE_OP_HDMI = BIT(4),
> > > + /**
> > > + * @DRM_BRIDGE_OP_DisplayPort: The bridge provides DisplayPort connector
> > > + * operations. Currently this is limited to the optional HDMI codec
> > > + * support.
> > > + *
> > > + * Note: currently there can be at most one bridge in a chain that sets
> > > + * this bit. This is to simplify corresponding glue code in connector
> > > + * drivers. Having both HDMI and DisplayPort bridges in the same bridge
> > > + * chain is also not allowed.
> > > + */
> > > + DRM_BRIDGE_OP_DisplayPort = BIT(5),
> >
> > The OP bits are not supposed to describe tbe type of bridge, but the
> > operations it implements. I see quite a bit of duplication between HDMI
> > and DisplayPort in this patch. Can we have a single bit named after the
> > feature that you want to support ? The bridge_hdmi and bridge_dp fields
> > should also be merged into a single one.
>
> In this case these ops actually describe the set of ops implemented by
> the bridge. DRM_BRIDGE_OP_HDMI implements hdmi_tmds_char_rate_valid(),
> hdmi_write_infoframe(), hdmi_clear_infoframe()Those are required for HDMI bridges (using the common infrastructure). > and hdmi_audio_*() callbacks. But those are certainly not required. If the OP enum is meant to list what a bridge implements, then we need to have a different enum for video, audio, and CEC. Maxime
signature.asc
Description: PGP signature
