On Tue, Feb 11, 2025 at 09:41:19AM +0100, Alexander Stein wrote:
> i.MX91/93 have a single register specifying parallel display output
> format. Add a bridge driver for setting the corresponding format.
> Currently only RGB565, RGB666 and RGB888 output is supported.
>
> Signed-off-by: Alexander Stein <alexander.st...@ew.tq-group.com>
> ---
> drivers/gpu/drm/bridge/Kconfig | 10 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> .../gpu/drm/bridge/imx9-parallel-disp-fmt.c | 213 ++++++++++++++++++
> 3 files changed, 224 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/imx9-parallel-disp-fmt.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 6b4664d91faa8..8b69977787883 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -90,6 +90,16 @@ config DRM_FSL_LDB
> help
> Support for i.MX8MP DPI-to-LVDS on-SoC encoder.
>
> +config DRM_IMX9_PARALLEL_DISPLAY_FORMAT
> + tristate "Support for i.MX93 parallel display format"
> + depends on OF && MFD_SYSCON
> + depends on ARCH_MXC || COMPILE_TEST
> + select DRM_KMS_HELPER
> + select DRM_PANEL_BRIDGE
> + help
> + Support for internal parallel display format configuration
> + found on i.MX91 and i.MX93 processors.
> +
> config DRM_ITE_IT6263
> tristate "ITE IT6263 LVDS/HDMI bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 97304b429a530..ee3406fed880f 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
> obj-$(CONFIG_DRM_CROS_EC_ANX7688) += cros-ec-anx7688.o
> obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
> obj-$(CONFIG_DRM_FSL_LDB) += fsl-ldb.o
> +obj-$(CONFIG_DRM_IMX9_PARALLEL_DISPLAY_FORMAT) += imx9-parallel-disp-fmt.o
> obj-$(CONFIG_DRM_ITE_IT6263) += ite-it6263.o
> obj-$(CONFIG_DRM_ITE_IT6505) += ite-it6505.o
> obj-$(CONFIG_DRM_LONTIUM_LT8912B) += lontium-lt8912b.o
> diff --git a/drivers/gpu/drm/bridge/imx9-parallel-disp-fmt.c
> b/drivers/gpu/drm/bridge/imx9-parallel-disp-fmt.c
> new file mode 100644
> index 0000000000000..c37bdda53377c
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/imx9-parallel-disp-fmt.c
> @@ -0,0 +1,213 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2022 NXP
> + * Copyright (c) 2026 TQ-Systems GmbH <li...@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Alexander Stein
> + */
> +
> +#include <linux/media-bus-format.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +
> +#define DISPLAY_MUX_CTRL 0x60
look like you have not use reg in dts and hardcode 0x60 here.
Frank
> +#define PARALLEL_DISP_FORMAT GENMASK(10, 8)
> +#define FORMAT_RGB888_TO_RGB888 FIELD_PREP(PARALLEL_DISP_FORMAT, 0)
> +#define FORMAT_RGB888_TO_RGB666 FIELD_PREP(PARALLEL_DISP_FORMAT, 1)
> +#define FORMAT_RGB565_TO_RGB565 FIELD_PREP(PARALLEL_DISP_FORMAT, 2)
> +#define FORMAT_RGB555_TO_RGB555 FIELD_PREP(PARALLEL_DISP_FORMAT, 3)
> +#define FORMAT_YUV_TO_YCBCR24
> FIELD_PREP(PARALLEL_DISP_FORMAT, 4)
> +#define FORMAT_YUV_TO_YUV444
> FIELD_PREP(PARALLEL_DISP_FORMAT, 5)
> +
> +struct imx9_pdf {
> + struct device *dev;
> + struct drm_bridge bridge;
> + struct drm_bridge *panel_bridge;
> + struct regmap *regmap;
> +};
> +
> +static inline struct imx9_pdf *to_imx9_pdf(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct imx9_pdf, bridge);
> +}
> +
> +static int imx9_pdf_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct imx9_pdf *pdf = to_imx9_pdf(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, pdf->panel_bridge,
> + bridge, flags);
> +}
> +
> +static void imx9_pdf_atomic_enable(struct drm_bridge *bridge,
> + struct drm_bridge_state *old_bridge_state)
> +{
> + struct imx9_pdf *pdf = to_imx9_pdf(bridge);
> + struct drm_atomic_state *state = old_bridge_state->base.state;
> + const struct drm_bridge_state *bridge_state;
> + u32 format;
> +
> + /* Get the bus format from the bridge state. */
> + bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
> +
> + switch (bridge_state->output_bus_cfg.format) {
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + format = FORMAT_RGB565_TO_RGB565;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + format = FORMAT_RGB888_TO_RGB666;
> + break;
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + format = FORMAT_RGB888_TO_RGB888;
> + break;
> + default:
> + /*
> + * Some bridges still don't set the correct bus format.
> + * Just print a warning.
> + */
> + dev_warn(pdf->dev,
> + "Unsupported bus format 0x%04x, please check output
> bridge driver\n",
> + bridge_state->output_bus_cfg.format);
> + return;
> + }
> +
> + regmap_update_bits(pdf->regmap, DISPLAY_MUX_CTRL, PARALLEL_DISP_FORMAT,
> + format);
> +}
> +
> +#define MAX_INPUT_SEL_FORMATS 2
> +static u32 *
> +imx9_pdf_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + u32 *input_fmts;
> +
> + *num_input_fmts = 0;
> +
> + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> + GFP_KERNEL);
> + if (!input_fmts)
> + return NULL;
> +
> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> + input_fmts[1] = MEDIA_BUS_FMT_RGB565_1X16;
> + *num_input_fmts = MAX_INPUT_SEL_FORMATS;
> +
> + return input_fmts;
> +}
> +
> +#define MAX_OUTPUT_SEL_FORMATS 3
> +static u32 *
> +imx9_pdf_atomic_get_output_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + unsigned int *num_output_fmts)
> +{
> + u32 *output_fmts;
> +
> + *num_output_fmts = 0;
> +
> + output_fmts = kcalloc(MAX_OUTPUT_SEL_FORMATS, sizeof(*output_fmts),
> + GFP_KERNEL);
> + if (!output_fmts)
> + return NULL;
> +
> + output_fmts[0] = MEDIA_BUS_FMT_RGB565_1X16;
> + output_fmts[1] = MEDIA_BUS_FMT_RGB666_1X18;
> + output_fmts[2] = MEDIA_BUS_FMT_RGB888_1X24;
> + *num_output_fmts = MAX_OUTPUT_SEL_FORMATS;
> +
> + return output_fmts;
> +}
> +
> +static enum drm_mode_status
> +imx9_pdf_mode_valid(struct drm_bridge *bridge,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode)
> +{
> + if (mode->clock > 80000)
> + return MODE_CLOCK_HIGH;
> +
> + return MODE_OK;
> +}
> +
> +static const struct drm_bridge_funcs funcs = {
> + .attach = imx9_pdf_attach,
> + .atomic_enable = imx9_pdf_atomic_enable,
> + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
> + .atomic_get_input_bus_fmts = imx9_pdf_atomic_get_input_bus_fmts,
> + .atomic_get_output_bus_fmts = imx9_pdf_atomic_get_output_bus_fmts,
> + .atomic_reset = drm_atomic_helper_bridge_reset,
> + .mode_valid = imx9_pdf_mode_valid,
> +};
> +
> +static int imx9_pdf_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *remote;
> + struct drm_panel *panel;
> + struct imx9_pdf *pdf;
> +
> + pdf = devm_kzalloc(dev, sizeof(*pdf), GFP_KERNEL);
> + if (!pdf)
> + return -ENOMEM;
> +
> + pdf->dev = &pdev->dev;
> + pdf->bridge.funcs = &funcs;
> + pdf->bridge.of_node = dev->of_node;
> + pdf->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +
> + pdf->regmap = syscon_node_to_regmap(dev->of_node->parent);
> + if (IS_ERR(pdf->regmap))
> + return dev_err_probe(dev, PTR_ERR(pdf->regmap),
> + "failed to get regmap\n");
> +
> + remote = of_graph_get_remote_node(dev->of_node, 1, 0);
> + panel = of_drm_find_panel(remote);
> + of_node_put(remote);
> + if (IS_ERR(panel))
> + return PTR_ERR(panel);
> +
> + pdf->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> + if (IS_ERR(pdf->panel_bridge))
> + return PTR_ERR(pdf->panel_bridge);
> +
> + platform_set_drvdata(pdev, pdf);
> +
> + devm_drm_bridge_add(dev, &pdf->bridge);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id imx9_pdf_dt_ids[] = {
> + { .compatible = "fsl,imx9-parallel-display-format", },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, imx9_pdf_dt_ids);
> +
> +static struct platform_driver imx9_pdf_driver = {
> + .probe = imx9_pdf_probe,
> + .driver = {
> + .name = "imx9-parallel-display-format",
> + .of_match_table = imx9_pdf_dt_ids,
> + },
> +};
> +module_platform_driver(imx9_pdf_driver);
> +
> +MODULE_AUTHOR("Alexander Stein <alexander.st...@ew.tq-group.com>");
> +MODULE_DESCRIPTION("i.MX91/i.MX93 parallel display format driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.34.1
>
