On 10.02.2025 6:10 PM, Konrad Dybcio wrote:
> On 8.02.2025 11:09 PM, Marijn Suijten wrote:
>> On 2025-02-03 21:14:26, Danila Tikhonov wrote:
>>> From: Eugene Lepshy <fekz...@gmail.com>
>>>
>>> DRM DSC helper has parameters for various bpc values other than 8:
>>
>> Weird zero-width \u200b spaces here between "values" and "other", please
>> delete
>> those.
>>
>>> (8/10/12/14/16).
>>>
>>> Remove this guard.
>>>
>>> Signed-off-by: Eugene Lepshy <fekz...@gmail.com>
>>> Signed-off-by: Danila Tikhonov <dan...@jiaxyga.com>
>>
>> Should this patch elaborate that those "DRM DSC helper" don't have any
>> additional guarding for the values you mention either, i.e. passing 9 or 11
>> or
>>> 16 don't seem to be checked anywhere else either?
>>
>> And your title might have space to spell out "Bits Per Component" entirely.
>>
>>> ---
>>> drivers/gpu/drm/msm/dsi/dsi_host.c | 7 +------
>>> 1 file changed, 1 insertion(+), 6 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> index 007311c21fda..d182af7bbb81 100644
>>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>>> @@ -1767,11 +1767,6 @@ static int dsi_populate_dsc_params(struct
>>> msm_dsi_host *msm_host, struct drm_dsc
>>> return -EINVAL;
>>> }
>>>
>>> - if (dsc->bits_per_component != 8) {
>>> - DRM_DEV_ERROR(&msm_host->pdev->dev, "DSI does not support
>>> bits_per_component != 8 yet\n");
>>> - return -EOPNOTSUPP;
>>> - }
>>> -
>>> dsc->simple_422 = 0;
>>> dsc->convert_rgb = 1;
>>> dsc->vbr_enable = 0;
>>
>> This seems supicous on the dpu1 side, in the original DSC 1.1 (not 1.2)
>> block in
>> dpu_hw_dsc_config(), which has:
>>
>> data |= (dsc->line_buf_depth << 3);
>> data |= (dsc->simple_422 << 2);
>> data |= (dsc->convert_rgb << 1);
>> data |= dsc->bits_per_component;
>>
>> The original value of `8` would overlap with the lowest bit of line_buf_depth
>> (4th bit in `data`). Now, the 2nd bit which will take the value from
>> convert_rgb, which is already set to 1 above, will overlap with the 2nd bit
>> in
>> your new bpc value of 10.
>>
>> Can you double-check that this code in DPU1 is actually valid? I assume you
>> have tested this panel at least and it is working (worthy mention in the
>> cover
>> letter?), this just seems like yet another mistake in the original bindings
>> (though the register always had a matching value with downstream on 8 BPC
>> panels
>> for me).
>
> It seems like the lowest bit should be set iff the input is 10bpc, the
> current situation where our '8' bleeds into the following (correctly named
> fields) is bad.
See also
https://github.com/Wikidepia/kernel_xiaomi_santoni-4.9/blob/master/drivers/gpu/drm/msm/sde/sde_hw_dsc.c#L67-L80
Konrad
