On Sun, Feb 09, 2025 at 10:42:53PM +0100, Marijn Suijten wrote:
> Ordering issues here cause an uninitialized (default STANDALONE)
> usecase to be programmed (which appears to be a MUX) in some cases
> when msm_dsi_host_register() is called, leading to the slave PLL in
> bonded-DSI mode to source from a clock parent (dsi1vco) that is off.
>
> This should seemingly not be a problem as the actual dispcc clocks from
> DSI1 that are muxed in the clock tree of DSI0 are way further down, this
> bit still seems to have an effect on them somehow and causes the right
> side of the panel controlled by DSI1 to not function.
>
> In an ideal world this code is refactored to no longer have such
> error-prone calls "across subsystems", and instead model the "PLL src"
> register field as a regular mux so that changing the clock parents
> programmatically or in DTS via `assigned-clock-parents` has the
> desired effect.
> But for the avid reader, the clocks that we *are* muxing into DSI0's
> tree are way further down, so if this bit turns out to be a simple mux
> between dsiXvco and out_div, that shouldn't have any effect as this
> whole tree is off anyway.
>
> Signed-off-by: Marijn Suijten <marijn.suij...@somainline.org>
> ---
> drivers/gpu/drm/msm/dsi/dsi_manager.c | 30 +++++++++++++++++++-----------
> 1 file changed, 19 insertions(+), 11 deletions(-)
Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY")
Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
>
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> index
> a210b7c9e5ca281a46fbdb226e25832719a684ea..b93205c034e4acc73d536deeddce6ebd694b4a80
> 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> @@ -74,17 +74,33 @@ static int dsi_mgr_setup_components(int id)
> int ret;
>
> if (!IS_BONDED_DSI()) {
> + /* Set the usecase before calling msm_dsi_host_register(),
> which would
> + * already program the PLL source mux based on a default
> usecase.
> + */
> + msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE);
> + msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> +
> ret = msm_dsi_host_register(msm_dsi->host);
> if (ret)
> return ret;
> -
> - msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE);
> - msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> } else if (other_dsi) {
> struct msm_dsi *master_link_dsi = IS_MASTER_DSI_LINK(id) ?
> msm_dsi : other_dsi;
> struct msm_dsi *slave_link_dsi = IS_MASTER_DSI_LINK(id) ?
> other_dsi : msm_dsi;
> +
> + /* PLL0 is to drive both DSI link clocks in bonded DSI mode.
> + *
> + /* Set the usecase before calling msm_dsi_host_register(),
> which would
> + * already program the PLL source mux based on a default
> usecase.
> + */
> + msm_dsi_phy_set_usecase(clk_master_dsi->phy,
> + MSM_DSI_PHY_MASTER);
> + msm_dsi_phy_set_usecase(clk_slave_dsi->phy,
> + MSM_DSI_PHY_SLAVE);
> + msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> + msm_dsi_host_set_phy_mode(other_dsi->host, other_dsi->phy);
> +
> /* Register slave host first, so that slave DSI device
> * has a chance to probe, and do not block the master
> * DSI device's probe.
> @@ -98,14 +114,6 @@ static int dsi_mgr_setup_components(int id)
> ret = msm_dsi_host_register(master_link_dsi->host);
> if (ret)
> return ret;
> -
> - /* PLL0 is to drive both 2 DSI link clocks in bonded DSI mode.
> */
> - msm_dsi_phy_set_usecase(clk_master_dsi->phy,
> - MSM_DSI_PHY_MASTER);
> - msm_dsi_phy_set_usecase(clk_slave_dsi->phy,
> - MSM_DSI_PHY_SLAVE);
> - msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> - msm_dsi_host_set_phy_mode(other_dsi->host, other_dsi->phy);
> }
>
> return 0;
>
> --
> 2.48.1
>
--
With best wishes
Dmitry
