Hi Detlev, On 2/3/25 6:16 PM, Detlev Casanova wrote:
Use the simple-audio-card driver with the hdmi0 QP node as CODEC and the i2s5 device as CPU.The simple-audio-card,mclk-fs value is set to 128 as it is done in the downstream driver. The #sound-dai-cells value is set to 0 in the hdmi0 node so that it can be used as an audio codec node. Signed-off-by: Detlev Casanova <detlev.casan...@collabora.com> --- arch/arm64/boot/dts/rockchip/rk3588-base.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi index 8cfa30837ce72..767bdfc06b7ec 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi @@ -1369,6 +1369,22 @@ i2s9_8ch: i2s@fddfc000 { status = "disabled"; };+ hdmi0_sound: hdmi0-sound {+ compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "hdmi0"; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi0>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s5_8ch>; + }; + }; +
This is an address/bus-less device, so I believe it needs to be put among other address/bus-less devices, which for Rockchip SoCs is at the top of the DT? c.f. https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html
**I** would put it between the firmware and the pmu-a55 nodes. Tested-by: Quentin Schulz <quentin.sch...@cherry.de> # RK3588 Tiger Haikou Thanks! Quentin
