Hi Alexander, Thank you for the patch.
On Tue, Jan 07, 2025 at 10:49:41AM +0100, Alexander Stein wrote: > fsl,imx-iomuxc-gpr.yaml only contains the mux-controller but the actual > video-mux is not part of it. So move it below root node. > Fixes the dtbs_check warning: > arch/arm/boot/dts/nxp/imx/imx7s-mba7.dtb: iomuxc-gpr@30340000: 'csi-mux' does > not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: > http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml# > > Signed-off-by: Alexander Stein <alexander.st...@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com> > --- > arch/arm/boot/dts/nxp/imx/imx7s.dtsi | 56 ++++++++++++++-------------- > 1 file changed, 28 insertions(+), 28 deletions(-) > > diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi > b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi > index 22dd72499ef27..2629968001a74 100644 > --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi > +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi > @@ -176,6 +176,34 @@ timer { > <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | > IRQ_TYPE_LEVEL_LOW)>; > }; > > + video_mux: csi-mux { > + compatible = "video-mux"; > + mux-controls = <&mux 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + > + port@0 { > + reg = <0>; > + }; > + > + port@1 { > + reg = <1>; > + > + csi_mux_from_mipi_vc0: endpoint { > + remote-endpoint = <&mipi_vc0_to_csi_mux>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + csi_mux_to_csi: endpoint { > + remote-endpoint = <&csi_from_csi_mux>; > + }; > + }; > + }; > + > soc: soc { > #address-cells = <1>; > #size-cells = <1>; > @@ -529,34 +557,6 @@ mux: mux-controller { > #mux-control-cells = <1>; > mux-reg-masks = <0x14 0x00000010>; > }; > - > - video_mux: csi-mux { > - compatible = "video-mux"; > - mux-controls = <&mux 0>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - > - port@0 { > - reg = <0>; > - }; > - > - port@1 { > - reg = <1>; > - > - csi_mux_from_mipi_vc0: endpoint > { > - remote-endpoint = > <&mipi_vc0_to_csi_mux>; > - }; > - }; > - > - port@2 { > - reg = <2>; > - > - csi_mux_to_csi: endpoint { > - remote-endpoint = > <&csi_from_csi_mux>; > - }; > - }; > - }; > }; > > ocotp: efuse@30350000 { -- Regards, Laurent Pinchart
