[PATCH v3 5/7] soc: mediatek: Add programming flow for unsupported subsys ID hardware

[Jason-JH . Lin]

To support hardware without subsys IDs on new SoCs, add a programming
flow that checks whether the subsys ID is valid. If the subsys ID is
invalid, the flow will call 2 alternative CMDQ APIs:
cmdq_pkt_assign() and cmdq_pkt_write_s_value() to achieve the same
functionality.

Signed-off-by: Jason-JH.Lin <jason-jh....@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c | 14 +++++++++++---
 drivers/soc/mediatek/mtk-mutex.c | 11 +++++++++--
 2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index bb4639ca0b8c..ce949b863b05 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -167,9 +167,17 @@ static void mtk_mmsys_update_bits(struct mtk_mmsys *mmsys, 
u32 offset, u32 mask,
        u32 tmp;
 
        if (mmsys->cmdq_base.size && cmdq_pkt) {
-               ret = cmdq_pkt_write_mask(cmdq_pkt, mmsys->cmdq_base.subsys,
-                                         mmsys->cmdq_base.offset + offset, val,
-                                         mask);
+               offset += mmsys->cmdq_base.offset;
+               if (mmsys->cmdq_base.subsys != CMDQ_SUBSYS_INVALID) {
+                       ret = cmdq_pkt_write_mask(cmdq_pkt, 
mmsys->cmdq_base.subsys,
+                                                 offset, val, mask);
+               } else {
+                       /* only MMIO access, no need to check mminfro_offset */
+                       ret = cmdq_pkt_assign(cmdq_pkt, CMDQ_THR_SPR_IDX0,
+                                             
CMDQ_ADDR_HIGH(mmsys->cmdq_base.pa_base));
+                       ret |= cmdq_pkt_write_s_mask_value(cmdq_pkt, 
CMDQ_THR_SPR_IDX0,
+                                                          
CMDQ_ADDR_LOW(offset), val, mask);
+               }
                if (ret)
                        pr_debug("CMDQ unavailable: using CPU write\n");
                else
diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index 5250c1d702eb..3788b16efbf4 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -963,6 +963,7 @@ int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void 
*pkt)
        struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx,
                                                 mutex[mutex->id]);
        struct cmdq_pkt *cmdq_pkt = (struct cmdq_pkt *)pkt;
+       dma_addr_t en_addr = mtx->addr + DISP_REG_MUTEX_EN(mutex->id);
 
        WARN_ON(&mtx->mutex[mutex->id] != mutex);
 
@@ -971,8 +972,14 @@ int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void 
*pkt)
                return -ENODEV;
        }
 
-       cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys,
-                      mtx->addr + DISP_REG_MUTEX_EN(mutex->id), 1);
+       if (mtx->cmdq_reg.subsys != CMDQ_SUBSYS_INVALID) {
+               cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys, en_addr, 1);
+       } else {
+               /* only MMIO access, no need to check mminfro_offset */
+               cmdq_pkt_assign(cmdq_pkt, CMDQ_THR_SPR_IDX0, 
CMDQ_ADDR_HIGH(en_addr));
+               cmdq_pkt_write_s_value(cmdq_pkt, CMDQ_THR_SPR_IDX0, 
CMDQ_ADDR_LOW(en_addr), 1);
+       }
+
        return 0;
 }
 EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq);
-- 
2.43.0