On 12/10/2024 2:41 PM, Sebastian Reichel wrote:
Hello Jessica,
On Tue, Dec 10, 2024 at 09:45:09AM -0800, Jessica Zhang wrote:
[...]
+static const struct raydium_rm67200_panel_info w552793baa_info = {
+ .mode = {
+ .clock = 132000,
+ .hdisplay = 1080,
+ .hsync_start = 1095,
+ .hsync_end = 1125,
+ .htotal = 1129,
+ .vdisplay = 1920,
+ .vsync_start = 1935,
+ .vsync_end = 1950,
+ .vtotal = 1952,
+ .width_mm = 68, /* 68.04mm */
+ .height_mm = 121, /* 120.96mm */
+ .type = DRM_MODE_TYPE_DRIVER,
+ },
+ .regulators = w552793baa_regulators,
+ .num_regulators = ARRAY_SIZE(w552793baa_regulators),
+ .panel_setup = w552793baa_setup,
Just curious, will there be other panels with different regulators and init
commands added for this driver in the future?
I don't know any other RM67200 based panels. But the init sequence
contains lots of vendor specific registers and I'm pretty sure it
is specific to the W552793BAA. I put the regulators into the panel
specific section, because the datasheet for the RM67200 specifies
slightly different ones than the w552793baa datasheet. Thus I expect
that other displays might have slight differences.
Ack, thanks for clarifying.
In that case,
Reviewed-by: Jessica Zhang <quic_jessz...@quicinc.com>
Thanks,
Jessica Zhang
Greetings,
-- Sebastian
